Kitchen Installers UK

Hob and oven installation · Surrey

Hob and oven installation in Farnham

If you live in Farnham and need hob and oven installation, we can measure the room, send an itemised written quote and book every trade in the right order until the kitchen is handed over.

Guide price£140 to £920
Postcodes includeGU9
Timescale2 to 4 hours for most hobs and ovens
A black induction hob set into a pale quartz worktop, with a built-in oven in a tall housing to one side

Who usually needs hob and oven installation in Farnham?

Many households in Farnham switch from gas to induction when they refit, which can mean a new cooker circuit and the old gas supply capped off safely.

If your Farnham kitchen has an old ceramic hob with a cracked top, an induction replacement may fit the same cut-out, though the circuit still needs checking. If your home is in Farnham or close by in Aldershot or Fleet, the same survey, quote and fitting process applies.

What is in a typical job?

After the survey visit we write the scope down. For hob and oven installation in Farnham it usually covers:

  • Range cookers levelled, with a stability bracket fitted to gas and dual-fuel models
  • Old hob or oven disconnected safely and taken away for recycling
  • Laminate and wood worktop cut-outs made to the hob template; stone cut-outs by the fabricator
  • Built-in single and double ovens fixed into housings with their ventilation gaps
  • Gas supply moved to a new hob position, with pipework tested and made good
  • Gas hobs and cookers connected and tightness tested by a Gas Safe registered engineer

Guide prices for hob and oven installation in Farnham

The figures below are guide prices for Farnham, including VAT and adjusted for typical costs across the South East. The fixed price comes after we have measured up. Labour in the South East generally costs more than the UK average, which lifts these ranges a little.

Guide prices for hob and oven installation in Farnham
Typical projectGuide price
Gas hob fitted and connected by a Gas Safe registered engineerExisting gas supply in the right place, tightness tested£140–£340
Induction or ceramic hob fitted on a suitable circuitCut-out, connection and test£140–£290
Range cooker installedGas or dual fuel, levelled, stability bracket fitted£170–£460
New gas pipe run to a new hob positionPipework, testing and making good£290–£920

Guide ranges cover fitting and connection to an existing suitable gas supply or cooker circuit, except the new gas pipe row; a new cooker circuit, alterations to stone worktops and the appliances themselves are priced separately. Prices include VAT at 20%.

Kitchens in homes around Farnham

Typical homes in this part of Surrey include 1930s semis, Victorian and Edwardian villas, detached family houses and new-build estates. 1930s semis often have a narrow kitchen beside the dining room, while larger detached houses and Edwardian villas may have room for an island or a separate utility.

Surrey's water is hard across most of the county, so limescale on taps and boiling water taps is common, and a scale-reducing filter is worth considering. Private roads, long drives and village lanes can be awkward for large lorries, while town-centre flats may need lift bookings and parking permits for delivery day.

Regulations for kitchen work in Farnham

In England, only a Gas Safe registered engineer may fit, connect or move a gas hob, cooker or gas pipework, and the installation is tightness tested afterwards. An induction hob often needs a dedicated cooker circuit; a new circuit is notifiable under Part P, so it is certified through a competent person scheme or building control. Connecting to an existing suitable circuit is not notifiable, but it must still meet BS 7671.

Listed buildings and conservation areas in older towns and villages may need consent for new vents, and flats in managed blocks usually need the freeholder's consent first.

Before you book hob and oven installation in Farnham

  • Before buying an induction hob for your Farnham home, check the rating of the cooker circuit at the consumer unit, or ask for it to be checked at the survey.
  • Confirm whether your new oven sits under the worktop or in a tall housing, because the ventilation and fixing requirements differ between the two.
  • Keep the hob's cut-out template and installation manual with the worktop plan, so a stone worktop for your kitchen in Surrey can be cut correctly by the fabricator.
  • Follow the hood and hob manufacturers' instructions on the minimum distance between them; gas hobs usually need more clearance than induction.

Questions about hob and oven installation in Farnham

How much does hob and oven installation cost in Farnham?

Hob and oven installation in Farnham typically costs £140 to £340 including VAT for connecting a gas hob to an existing supply, based on prices in the South East. Larger or more involved jobs cost more, and your price is fixed in writing after a free survey visit.

Do you work near Farnham as well?

Yes. As well as Farnham itself, we cover the rest of Surrey and nearby towns such as Aldershot and Fleet. The process is the same wherever the kitchen is.

Does an induction hob need a new circuit?

Often, yes. Many induction hobs draw more current than an ordinary socket circuit can supply, so they are wired to a dedicated cooker circuit from the consumer unit. If you already have a cooker circuit of the right rating, the hob can usually connect to it. A new circuit is notifiable in England and Wales, and everywhere it must be tested and certified to BS 7671.

Do built-in ovens need ventilation?

Yes. Built-in ovens release heat, and their installation instructions set the gaps and openings the housing must leave, often at the back or beneath the oven. Blocking them can overheat the surrounding units and the oven's own controls. An oven under the worktop and one in a tall housing have different requirements, so we check the instructions for your model before fitting.

Who is allowed to connect a gas hob?

By law, anyone who carries out gas work for payment must be on the Gas Safe Register, in Great Britain and Northern Ireland, and anyone working on gas must be competent to do it. We only use Gas Safe registered engineers, and we strongly advise against fitting a gas hob yourself. The engineer connects the hob, tests the installation for tightness, checks the burners and the room's ventilation, and leaves the appliance safe to use. You can ask to see the engineer's Gas Safe ID card before work starts.

Hob and oven installation in neighbouring towns

The same service is available a short drive from Farnham, including:

More services for Farnham kitchens

Free survey visit

Book a free survey visit in Farnham

We measure up, check walls, floors and service positions, and send an itemised written quote. Or get a guide price online in about two minutes.

Book a free survey visit

Tell us about the kitchen and the work. We will call to arrange a visit.

We use your details only to arrange your visit and quote. See our privacy notice.

Prefer to talk? 0800 088 6341

CallGuide price