Kitchen Installers UK

Hob and oven installation · Hampshire

Hob and oven installation in Farnborough

Hob and oven installation for Farnborough homes: gas, induction and ceramic hobs, built-in ovens and range cookers fitted and connected safely. Every job starts with a free survey visit and a written quote.

Guide price£140 to £920
Postcodes includeGU11
Timescale2 to 4 hours for most hobs and ovens
A black induction hob set into a pale quartz worktop, with a built-in oven in a tall housing to one side

What prompts hob and oven installation in Farnborough?

Some people in Farnborough buy a hob and oven online and need them fitted properly, with gas work by a Gas Safe registered engineer and electrics tested and certified.

Many households in Farnborough switch from gas to induction when they refit, which can mean a new cooker circuit and the old gas supply capped off safely. We cover all of Farnborough, including the GU11 postcode district, and travel out to neighbouring towns across Hampshire.

What does hob and oven installation in Farnborough include?

Your written quote lists everything included. For hob and oven installation, that normally means:

  • Range cookers levelled, with a stability bracket fitted to gas and dual-fuel models
  • Built-in single and double ovens fixed into housings with their ventilation gaps
  • Appliance models checked against worktop cut-outs, oven housings and existing supplies
  • Old hob or oven disconnected safely and taken away for recycling
  • Induction and ceramic hobs wired to a suitable cooker circuit and tested
  • Gas supply moved to a new hob position, with pipework tested and made good

What does hob and oven installation cost in Farnborough?

As a starting point for Farnborough, these ranges include VAT at 20% and allow for typical labour costs in the South East. Labour in the South East generally costs more than the UK average, which lifts these ranges a little.

What does hob and oven installation cost in Farnborough?
Typical projectGuide price
Gas hob fitted and connected by a Gas Safe registered engineerExisting gas supply in the right place, tightness tested£140–£340
Induction or ceramic hob fitted on a suitable circuitCut-out, connection and test£140–£290
Range cooker installedGas or dual fuel, levelled, stability bracket fitted£170–£460
New gas pipe run to a new hob positionPipework, testing and making good£290–£920

Guide ranges cover fitting and connection to an existing suitable gas supply or cooker circuit, except the new gas pipe row; a new cooker circuit, alterations to stone worktops and the appliances themselves are priced separately. Prices include VAT at 20%.

Local homes and their kitchens

The housing mix across Hampshire includes Victorian terraces, 1930s semis, post-war estate houses and thatched and brick cottages, so no two kitchen fits are quite alike. Terraces in Southampton and Portsmouth often have a narrow back kitchen, while post-war estate houses tend to have a compact rectangular room suited to an L-shape.

Water across Hampshire is mostly hard, largely from chalk sources, so limescale on taps and boiling water taps is common and a filter can help. Dense terraced streets can be very tight for parking, and New Forest lanes and village roads may limit the size of delivery vehicle.

Building regulations, electrics and gas in Farnborough

In England, only a Gas Safe registered engineer may fit, connect or move a gas hob, cooker or gas pipework, and the installation is tightness tested afterwards. An induction hob often needs a dedicated cooker circuit; a new circuit is notifiable under Part P, so it is certified through a competent person scheme or building control. Connecting to an existing suitable circuit is not notifiable, but it must still meet BS 7671.

Homes within the New Forest or South Downs national parks, listed cottages and conservation areas may need consent for a new extractor vent or alterations to historic features.

Planning ahead

  • Keep the hob's cut-out template and installation manual with the worktop plan, so a stone worktop for your kitchen in Hampshire can be cut correctly by the fabricator.
  • If you are moving the hob in your Farnborough kitchen, choose the cooker hood at the same time so the extraction and ducting can follow it.
  • Before buying an induction hob for your Farnborough home, check the rating of the cooker circuit at the consumer unit, or ask for it to be checked at the survey.
  • Switching from gas to induction leaves a gas pipe that must be capped safely, so plan that with the Gas Safe engineer at the same visit.

Questions about hob and oven installation in Farnborough

How much does hob and oven installation cost in Farnborough?

Hob and oven installation in Farnborough typically costs £140 to £340 including VAT for connecting a gas hob to an existing supply, based on prices in the South East. Larger or more involved jobs cost more, and your price is fixed in writing after a free survey visit.

Do you work near Farnborough as well?

Yes. As well as Farnborough itself, we cover the rest of Hampshire and nearby towns such as Camberley and Aldershot. The process is the same wherever the kitchen is.

Do built-in ovens need ventilation?

Yes. Built-in ovens release heat, and their installation instructions set the gaps and openings the housing must leave, often at the back or beneath the oven. Blocking them can overheat the surrounding units and the oven's own controls. An oven under the worktop and one in a tall housing have different requirements, so we check the instructions for your model before fitting.

Who is allowed to connect a gas hob?

By law, anyone who carries out gas work for payment must be on the Gas Safe Register, in Great Britain and Northern Ireland, and anyone working on gas must be competent to do it. We only use Gas Safe registered engineers, and we strongly advise against fitting a gas hob yourself. The engineer connects the hob, tests the installation for tightness, checks the burners and the room's ventilation, and leaves the appliance safe to use. You can ask to see the engineer's Gas Safe ID card before work starts.

Why does a range cooker need a stability bracket?

Because a range cooker can tip forward if weight is put on an open oven door, which could damage the gas connection or injure someone. Gas and dual-fuel models are secured with a stability bracket or chain to the wall or floor behind, as the manufacturer specifies, and the cooker is levelled on a firm floor so its doors close properly and pans sit flat.

Also covering nearby towns

Close to Farnborough? We cover these nearby towns too:

Combine hob and oven installation with other work

Free survey visit

Book a free survey visit in Farnborough

We measure up, check walls, floors and service positions, and send an itemised written quote. Or get a guide price online in about two minutes.

Book a free survey visit

Tell us about the kitchen and the work. We will call to arrange a visit.

We use your details only to arrange your visit and quote. See our privacy notice.

Prefer to talk? 0800 088 6341

CallGuide price