Hob and oven installation · Scotland
Hob and oven installation in Dundee and Angus
Hob and oven installation in Dundee and Angus starts with a free visit to measure up, then a written scope and quote before any work begins.
Thinking about hob and oven installation in Dundee and Angus?
Families in Dundee and Angus adding a double oven may find the existing circuit is not rated for it, so planning the electrics early avoids a delay on fitting day.
A new kitchen layout in Dundee and Angus sometimes puts the hob on an island or another wall, so gas pipework or a cooker circuit has to follow it to the new position.
What does hob and oven installation in Dundee and Angus include?
Your written quote lists everything included. For hob and oven installation, that normally means:
- Appliance models checked against worktop cut-outs, oven housings and existing supplies
- Laminate and wood worktop cut-outs made to the hob template; stone cut-outs by the fabricator
- Gas hobs and cookers connected and tightness tested by a Gas Safe registered engineer
- Induction and ceramic hobs wired to a suitable cooker circuit and tested
- Built-in single and double ovens fixed into housings with their ventilation gaps
- Range cookers levelled, with a stability bracket fitted to gas and dual-fuel models
- Gas supply moved to a new hob position, with pipework tested and made good
- Old hob or oven disconnected safely and taken away for recycling
How much does hob and oven installation cost in Dundee and Angus?
The figures below are guide prices for Dundee and Angus, including VAT and adjusted for typical costs across Scotland. The fixed price comes after we have measured up. Costs across Scotland tend to sit under UK averages, which these ranges reflect.
| Typical project | Guide price |
|---|---|
| Gas hob fitted and connected by a Gas Safe registered engineerExisting gas supply in the right place, tightness tested | £110–£280 |
| Induction or ceramic hob fitted on a suitable circuitCut-out, connection and test | £110–£240 |
| Range cooker installedGas or dual fuel, levelled, stability bracket fitted | £140–£380 |
| New gas pipe run to a new hob positionPipework, testing and making good | £240–£750 |
Guide ranges cover fitting and connection to an existing suitable gas supply or cooker circuit, except the new gas pipe row; a new cooker circuit, alterations to stone worktops and the appliances themselves are priced separately. Prices include VAT at 20%.
Kitchens in homes across Dundee and Angus
Across Dundee and Angus you will often find sandstone tenement flats, Victorian villas, post-war council-built houses and fishing town cottages, and each shapes the kitchen differently. Dundee's tenement flats often have a narrow kitchen or a box room off the hall, while villas in Broughty Ferry and the Angus towns tend to have larger separate kitchens.
Dundee and Angus have soft mains water, so limescale is rarely an issue and taps and boiling water taps tend to stay free of heavy scale. Common stairs in tenements, steep streets in parts of Dundee and narrow glen roads in Angus can each affect deliveries and worktop lengths.
Tenement flats often have a small kitchen that owners open into the living room, which needs a building warrant if a load-bearing wall is involved, and can need one even if it is not, where the change affects the escape route or fire separation. Victorian villa kitchens may sit in an old scullery area with high ceilings and original features.
Rules for hob and oven installation in Dundee and Angus
In Scotland, gas hobs, cookers and pipework must be fitted and tested by a Gas Safe registered engineer. Replacing a hob or oven, or adding a cooker circuit in a house, does not normally need a building warrant, but the electrics must meet building standards 4.5 and 4.6 and BS 7671. Ask for an Electrical Installation Certificate for any new circuit.
Consent may be needed for new vents on listed buildings and in conservation areas, and homes in the upper Angus glens fall within the Cairngorms National Park.
Before you start
- Switching from gas to induction leaves a gas pipe that must be capped safely, so plan that with the Gas Safe engineer at the same visit.
- Measure the oven housing against the installation dimensions, including the ventilation gaps at the back or base that the manufacturer requires.
- A range cooker needs a level, firm floor and, for gas and dual-fuel models, a stability bracket so it cannot tip when the door is loaded.
- Follow the hood and hob manufacturers' instructions on the minimum distance between them; gas hobs usually need more clearance than induction.
- If you are moving the hob in your Dundee and Angus kitchen, choose the cooker hood at the same time so the extraction and ducting can follow it.
- Keep the hob's cut-out template and installation manual with the worktop plan, so a stone worktop for your kitchen in Dundee and Angus can be cut correctly by the fabricator.
Questions about hob and oven installation in Dundee and Angus
How much does hob and oven installation cost in Dundee and Angus?
Guide prices in Dundee and Angus are about £110 to £280 including VAT for connecting a gas hob to an existing supply. The final price depends on the size of the kitchen and what is moving, and is set out in an itemised written quote.
Do you cover the whole of Dundee and Angus?
Yes. We carry out hob and oven installation across Dundee and Angus, including Dundee, Arbroath, Forfar and Montrose. Every job starts with a free survey visit and an itemised written quote.
Who is allowed to connect a gas hob?
By law, anyone who carries out gas work for payment must be on the Gas Safe Register, in Great Britain and Northern Ireland, and anyone working on gas must be competent to do it. We only use Gas Safe registered engineers, and we strongly advise against fitting a gas hob yourself. The engineer connects the hob, tests the installation for tightness, checks the burners and the room's ventilation, and leaves the appliance safe to use. You can ask to see the engineer's Gas Safe ID card before work starts.
Do built-in ovens need ventilation?
Yes. Built-in ovens release heat, and their installation instructions set the gaps and openings the housing must leave, often at the back or beneath the oven. Blocking them can overheat the surrounding units and the oven's own controls. An oven under the worktop and one in a tall housing have different requirements, so we check the instructions for your model before fitting.
Why does a range cooker need a stability bracket?
Because a range cooker can tip forward if weight is put on an open oven door, which could damage the gas connection or injure someone. Gas and dual-fuel models are secured with a stability bracket or chain to the wall or floor behind, as the manufacturer specifies, and the cooker is levelled on a firm floor so its doors close properly and pans sit flat.
Hob and oven installation in towns across Dundee and Angus
Choose a town for local guide prices and postcode coverage:
- Hob and oven installation in Dundee
- Hob and oven installation in Arbroath
- Hob and oven installation in Forfar
- Hob and oven installation in Montrose
- Hob and oven installation in Brechin