Hob and oven installation in Fulham

Why hob and oven installation for a Fulham home?

Many households in Fulham switch from gas to induction when they refit, which can mean a new cooker circuit and the old gas supply capped off safely.

Some people in Fulham buy a hob and oven online and need them fitted properly, with gas work by a Gas Safe registered engineer and electrics tested and certified. We cover all of Fulham, including the SW6 postcode district, and travel out to neighbouring towns across Greater London.

What we cover for hob and oven installation in Fulham

Here is what usually goes into hob and oven installation, adjusted to your Fulham kitchen after we have measured it:

Gas supply moved to a new hob position, with pipework tested and made good
Gas hobs and cookers connected and tightness tested by a Gas Safe registered engineer
Old hob or oven disconnected safely and taken away for recycling
Built-in single and double ovens fixed into housings with their ventilation gaps
Laminate and wood worktop cut-outs made to the hob template; stone cut-outs by the fabricator
Induction and ceramic hobs wired to a suitable cooker circuit and tested

What should you budget for hob and oven installation in Fulham?

These guide ranges include VAT at 20% and are adjusted for prices in London. We confirm your price in writing after a free survey visit. Labour in London generally costs more than the UK average, which lifts these ranges a little.

What should you budget for hob and oven installation in Fulham?
Typical project	Guide price
Gas hob fitted and connected by a Gas Safe registered engineerExisting gas supply in the right place, tightness tested	£160–£390
Induction or ceramic hob fitted on a suitable circuitCut-out, connection and test	£160–£320
Range cooker installedGas or dual fuel, levelled, stability bracket fitted	£200–£520
New gas pipe run to a new hob positionPipework, testing and making good	£320–£1,000

Guide ranges cover fitting and connection to an existing suitable gas supply or cooker circuit, except the new gas pipe row; a new cooker circuit, alterations to stone worktops and the appliances themselves are priced separately. Prices include VAT at 20%.

House types around Fulham and what they mean for a kitchen

Across Greater London you will often find Victorian and Edwardian terraces, conversion flats, mansion block flats and 1930s semis, and each shapes the kitchen differently. Victorian terraces often have a narrow galley beside the side return, while conversion flats and mansion blocks usually fit the kitchen into a small room or along one living-room wall.

London's mains water is hard, so limescale builds quickly on taps and boiling water taps, and a scale-reducing filter is worth planning in. Permit parking, red routes and flats without lifts are common, so parking suspensions, stair carries and lift bookings may need arranging before delivery day.

What rules apply to hob and oven installation in Fulham?

In England, only a Gas Safe registered engineer may fit, connect or move a gas hob, cooker or gas pipework, and the installation is tightness tested afterwards. An induction hob often needs a dedicated cooker circuit; a new circuit is notifiable under Part P, so it is certified through a competent person scheme or building control. Connecting to an existing suitable circuit is not notifiable, but it must still meet BS 7671.

Conservation areas are widespread across London, so a new extractor vent on a front wall may need permission, and leaseholders usually need the freeholder's written consent first.

Planning ahead

Measure the gap for a range cooker at worktop height and at floor level, as older walls and thick skirting can narrow the space more than expected.
Keep the hob's cut-out template and installation manual with the worktop plan, so a stone worktop for your kitchen in Greater London can be cut correctly by the fabricator.
If you are replacing an old cooker with a separate hob and oven in your Fulham kitchen, ask for the gas supply position and condition to be checked first.
Check the induction hob's power rating against your existing cooker circuit, as induction hobs often need a dedicated circuit from the consumer unit.

Questions about hob and oven installation in Fulham

How much does hob and oven installation cost in Fulham?

For connecting a gas hob to an existing supply, budget around £160 to £390 including VAT in Fulham. That reflects typical costs in London; we confirm the actual figure in writing once we have measured up.

Do you cover all of Fulham?

Yes. We work across Fulham, including the SW6 postcode district, and nearby towns such as Chelsea and Putney. Book a free survey visit and we will arrange a time that suits you.

Why does a range cooker need a stability bracket?

Because a range cooker can tip forward if weight is put on an open oven door, which could damage the gas connection or injure someone. Gas and dual-fuel models are secured with a stability bracket or chain to the wall or floor behind, as the manufacturer specifies, and the cooker is levelled on a firm floor so its doors close properly and pans sit flat.

Do built-in ovens need ventilation?

Yes. Built-in ovens release heat, and their installation instructions set the gaps and openings the housing must leave, often at the back or beneath the oven. Blocking them can overheat the surrounding units and the oven's own controls. An oven under the worktop and one in a tall housing have different requirements, so we check the instructions for your model before fitting.

Does an induction hob need a new circuit?

Often, yes. Many induction hobs draw more current than an ordinary socket circuit can supply, so they are wired to a dedicated cooker circuit from the consumer unit. If you already have a cooker circuit of the right rating, the hob can usually connect to it. A new circuit is notifiable in England and Wales, and everywhere it must be tested and certified to BS 7671.

Hob and oven installation in neighbouring towns

The same service is available a short drive from Fulham, including: