Kitchen Installers UK

Hob and oven installation · Surrey

Hob and oven installation in Camberley

Homeowners and landlords in Camberley can book us for hob and oven installation: gas, induction and ceramic hobs, built-in ovens and range cookers fitted and connected safely.

Guide price£140 to £920
Postcodes includeGU15
Timescale2 to 4 hours for most hobs and ovens
A black induction hob set into a pale quartz worktop, with a built-in oven in a tall housing to one side

Is hob and oven installation right for your Camberley kitchen?

Keen cooks across Surrey often choose a range cooker, which needs a level floor, the right clearances to the units and a stability bracket on gas models.

Some people in Camberley buy a hob and oven online and need them fitted properly, with gas work by a Gas Safe registered engineer and electrics tested and certified. Our Surrey coverage reaches every part of Camberley (GU15) and out towards Sandhurst.

What does the job involve?

Your written quote lists everything included. For hob and oven installation, that normally means:

  • Range cookers levelled, with a stability bracket fitted to gas and dual-fuel models
  • Laminate and wood worktop cut-outs made to the hob template; stone cut-outs by the fabricator
  • Old hob or oven disconnected safely and taken away for recycling
  • Induction and ceramic hobs wired to a suitable cooker circuit and tested
  • Gas supply moved to a new hob position, with pipework tested and made good
  • Gas hobs and cookers connected and tightness tested by a Gas Safe registered engineer

What does hob and oven installation cost in Camberley?

Typical hob and oven installation prices for homes in Camberley, including VAT and adjusted for the South East. Your own figure depends on the size of the kitchen, the layout and what is moving. Expect costs in the South East to sit somewhat above UK averages, reflecting local labour rates.

What does hob and oven installation cost in Camberley?
Typical projectGuide price
Gas hob fitted and connected by a Gas Safe registered engineerExisting gas supply in the right place, tightness tested£140–£340
Induction or ceramic hob fitted on a suitable circuitCut-out, connection and test£140–£290
Range cooker installedGas or dual fuel, levelled, stability bracket fitted£170–£460
New gas pipe run to a new hob positionPipework, testing and making good£290–£920

Guide ranges cover fitting and connection to an existing suitable gas supply or cooker circuit, except the new gas pipe row; a new cooker circuit, alterations to stone worktops and the appliances themselves are priced separately. Prices include VAT at 20%.

Local homes and their kitchens

Typical homes in this part of Surrey include 1930s semis, Victorian and Edwardian villas, detached family houses and new-build estates. 1930s semis often have a narrow kitchen beside the dining room, while larger detached houses and Edwardian villas may have room for an island or a separate utility.

Private roads, long drives and village lanes can be awkward for large lorries, while town-centre flats may need lift bookings and parking permits for delivery day. Surrey's water is hard across most of the county, so limescale on taps and boiling water taps is common, and a scale-reducing filter is worth considering.

What rules apply to hob and oven installation in Camberley?

In England, only a Gas Safe registered engineer may fit, connect or move a gas hob, cooker or gas pipework, and the installation is tightness tested afterwards. An induction hob often needs a dedicated cooker circuit; a new circuit is notifiable under Part P, so it is certified through a competent person scheme or building control. Connecting to an existing suitable circuit is not notifiable, but it must still meet BS 7671.

Listed buildings and conservation areas in older towns and villages may need consent for new vents, and flats in managed blocks usually need the freeholder's consent first.

Planning ahead

  • Ask the Gas Safe engineer for a record of the work and keep it with your home documents, especially if you let a property in Surrey.
  • Measure the gap for a range cooker at worktop height and at floor level, as older walls and thick skirting can narrow the space more than expected.
  • If your Camberley home has an open-flued gas appliance, mention it at the survey, because any new extraction above the hob will need a spillage test.
  • Follow the hood and hob manufacturers' instructions on the minimum distance between them; gas hobs usually need more clearance than induction.

Questions about hob and oven installation in Camberley

How much does hob and oven installation cost in Camberley?

Hob and oven installation in Camberley typically costs £140 to £340 including VAT for connecting a gas hob to an existing supply, based on prices in the South East. Larger or more involved jobs cost more, and your price is fixed in writing after a free survey visit.

Which parts of Camberley do you work in?

All of them. Our Surrey coverage takes in the whole of Camberley, including the GU15 postcode district, as well as surrounding towns such as Sandhurst. If you are unsure, send us your postcode.

Who is allowed to connect a gas hob?

By law, anyone who carries out gas work for payment must be on the Gas Safe Register, in Great Britain and Northern Ireland, and anyone working on gas must be competent to do it. We only use Gas Safe registered engineers, and we strongly advise against fitting a gas hob yourself. The engineer connects the hob, tests the installation for tightness, checks the burners and the room's ventilation, and leaves the appliance safe to use. You can ask to see the engineer's Gas Safe ID card before work starts.

Do built-in ovens need ventilation?

Yes. Built-in ovens release heat, and their installation instructions set the gaps and openings the housing must leave, often at the back or beneath the oven. Blocking them can overheat the surrounding units and the oven's own controls. An oven under the worktop and one in a tall housing have different requirements, so we check the instructions for your model before fitting.

Why does a range cooker need a stability bracket?

Because a range cooker can tip forward if weight is put on an open oven door, which could damage the gas connection or injure someone. Gas and dual-fuel models are secured with a stability bracket or chain to the wall or floor behind, as the manufacturer specifies, and the cooker is levelled on a firm floor so its doors close properly and pans sit flat.

Also covering nearby towns

We also carry out hob and oven installation in these towns near Camberley:

Combine hob and oven installation with other work

Free survey visit

Book a free survey visit in Camberley

We measure up, check walls, floors and service positions, and send an itemised written quote. Or get a guide price online in about two minutes.

Book a free survey visit

Tell us about the kitchen and the work. We will call to arrange a visit.

We use your details only to arrange your visit and quote. See our privacy notice.

Prefer to talk? 0800 088 6341

CallGuide price