Flat-pack kitchen fitting · England
Flat-pack kitchen fitting in Bristol
Flat-pack kitchen fitting in Bristol starts with a free visit to measure up, then a written scope and quote before any work begins.
Thinking about flat-pack kitchen fitting in Bristol?
Landlords in Bristol sometimes choose flat-pack kitchens for rented homes, because matching doors and replacement parts can often be bought again later if a unit is damaged.
If your kitchen is in a Bristol flat or a small terrace with no room for a delivery of built cabinets, flat-pack units can be assembled in the room itself.
What does flat-pack kitchen fitting in Bristol include?
After the survey visit we write the scope down. For flat-pack kitchen fitting in Bristol it usually covers:
- Free survey visit to check the plan, the boxes and the room
- Carcasses assembled on site on a flat surface and checked for square
- Back panels fitted fully into their grooves or fixed as the instructions require
- Base units levelled on adjustable legs and fixed to the wall and to each other
- Wall units hung on hanging rails or brackets fixed securely into the wall
- Drawer boxes, runners and hinges assembled, fitted and adjusted to line up
- Laminate worktops cut and jointed, with cut edges sealed around the sink
- Panels, plinths, sink, tap and appliance connections to existing points
How much does flat-pack kitchen fitting cost in Bristol?
Use these ranges to plan your budget. They include VAT, reflect costs in the South West, and are firmed up once we have seen your Bristol kitchen. Prices across the South West are broadly in line with UK averages.
| Typical project | Guide price |
|---|---|
| Small flat-pack kitchen, built and fittedCarcasses assembled on site, then fitted as a rigid kitchen would be | £1,900–£3,100 |
| Medium flat-pack kitchen, built and fittedAs above | £2,900–£4,300 |
| Large flat-pack kitchen with tall units, built and fittedAs above | £4,100–£5,700 |
Flat-pack prices include assembling the carcasses on site and fitting units, doors, panels, plinths and laminate worktops with connections to existing points; stone worktops, new circuits, moved services, tiling and flooring are extra. Prices include VAT at 20%.
Kitchens in homes across Bristol
You will find Victorian terraces, Georgian townhouses and flats, 1930s semis and flats in converted houses throughout Bristol. Bristol's Victorian terraces often have a narrow rear galley, while Georgian houses split into flats can have kitchens tucked into former bedrooms or reception rooms.
Bristol's mains water is hard, so limescale on taps, kettles and boiling water taps is common, and an inline filter or softener can help. Steep hillside streets, permit parking and terraces with no rear access are common in the city, so long worktops may need careful handling through the front door.
Many Bristol terraces have a small kitchen behind the back room, and opening the two into one space is a popular change. Where a flat sits in a converted Georgian or Victorian house, the work often means fitting a lot into a modest room while working around shared walls and services.
Rules for flat-pack kitchen fitting in Bristol
Assembling and fitting a flat-pack kitchen needs no planning permission in England; if the building is listed, listed building consent may be needed where the work affects its character. Electrics must meet BS 7671: extra sockets or spurs on an existing kitchen circuit are not notifiable, but a new cooker or induction circuit is notifiable under Part P. Gas hobs are connected only by Gas Safe registered engineers, and any new cooker hood should meet Approved Document F.
Many of the city's older streets are conservation areas and some houses are listed, so a new extractor vent or the removal of historic features may need consent first.
Before you start
- Look at the back panels supplied; thin backs rely on being fitted correctly into their grooves to keep each carcass square and rigid.
- Keep every bag of cam fittings, dowels and screws with its own box, as parts for different units often look almost identical.
- Clear a space next to the kitchen for assembly; carcasses need a flat floor and room to be checked for square before fitting.
- Ask whether a sink base mat is included, and make sure every cut edge around the sink, waste and pipe holes is sealed.
- Ask your supplier for a small bag of spare cams, dowels and hinge screws, so a lost fitting does not mean waiting days for a tiny part.
- Count the boxes against the delivery note when your flat-pack kitchen arrives in Bristol; orders can run to dozens of boxes and one short box can stall a fit.
Questions about flat-pack kitchen fitting in Bristol
How much does flat-pack kitchen fitting cost in Bristol?
Guide prices in Bristol are about £1,900 to £3,100 including VAT for a small flat-pack kitchen, built and fitted. The final price depends on the size of the kitchen and what is moving, and is set out in an itemised written quote.
Do you cover the whole of Bristol?
Yes. We carry out flat-pack kitchen fitting across Bristol. Every job starts with a free survey visit and an itemised written quote.
How do you protect a flat-pack sink unit from water?
Mainly by sealing. Cut edges of board near the sink, including the holes for pipes and the waste, are sealed before the unit is fitted, and the worktop cut-out is sealed before the sink goes in. A sink base mat adds a second layer of protection against drips. Isolation valves on the supplies also mean that a later leak can be shut off quickly.
What is the difference between flat-pack and rigid kitchen units?
Rigid units arrive factory-assembled, usually glued and dowelled, so they are ready to fix. Flat-pack units arrive as boards and fittings in a box and are built on site. Both can make a good kitchen. Flat-pack is cheaper to buy and easier to carry into tight spaces, while rigid units save assembly time and come square from the factory, which is why the fitting labour is a little lower.
Are flat-pack wall units strong enough once they are hung?
Yes, when they are assembled and hung correctly. Wall units carry their load through the back panel and the hanging fixings, so the back must be fully fitted and the rail or brackets fixed into the wall with fixings that suit its construction. Plasterboard walls may need timber noggins or specialist fixings behind the board. We check the wall types at the survey and plan the fixings before the fit.