Flat-pack kitchen fitting in Southsea

Is flat-pack kitchen fitting right for your Southsea kitchen?

First-time buyers in Southsea often choose a flat-pack range to replace a worn kitchen soon after moving in, keeping money aside for flooring and decorating.

A Southsea kitchen with uneven floors or walls that are out of true needs the same care whatever the units, and flat-pack carcasses gain most from being squared before they are scribed. If your home is in Southsea or close by in Portsmouth or Gosport, the same survey, quote and fitting process applies.

What is in a typical job?

Your written quote lists everything included. For flat-pack kitchen fitting, that normally means:

Drawer boxes, runners and hinges assembled, fitted and adjusted to line up
Wall units hung on hanging rails or brackets fixed securely into the wall
Free survey visit to check the plan, the boxes and the room
Base units levelled on adjustable legs and fixed to the wall and to each other
Back panels fitted fully into their grooves or fixed as the instructions require
Panels, plinths, sink, tap and appliance connections to existing points

Guide prices for flat-pack kitchen fitting in Southsea

The figures below are guide prices for Southsea, including VAT and adjusted for typical costs across the South East. The fixed price comes after we have measured up. Prices in the South East usually run above the national guide, mainly because labour and parking cost more.

Guide prices for flat-pack kitchen fitting in Southsea
Typical project	Guide price
Small flat-pack kitchen, built and fittedCarcasses assembled on site, then fitted as a rigid kitchen would be	£2,100–£3,400
Medium flat-pack kitchen, built and fittedAs above	£3,200–£4,800
Large flat-pack kitchen with tall units, built and fittedAs above	£4,600–£6,300

Flat-pack prices include assembling the carcasses on site and fitting units, doors, panels, plinths and laminate worktops with connections to existing points; stone worktops, new circuits, moved services, tiling and flooring are extra. Prices include VAT at 20%.

Fitting kitchens in older and newer Southsea homes

In and around Southsea, homes range across Victorian terraces, 1930s semis, post-war estate houses and thatched and brick cottages. Terraces in Southampton and Portsmouth often have a narrow back kitchen, while post-war estate houses tend to have a compact rectangular room suited to an L-shape.

Dense terraced streets can be very tight for parking, and New Forest lanes and village roads may limit the size of delivery vehicle. Water across Hampshire is mostly hard, largely from chalk sources, so limescale on taps and boiling water taps is common and a filter can help.

Do you need approval for flat-pack kitchen fitting in Southsea?

Assembling and fitting a flat-pack kitchen needs no planning permission in England; if the building is listed, listed building consent may be needed where the work affects its character. Electrics must meet BS 7671: extra sockets or spurs on an existing kitchen circuit are not notifiable, but a new cooker or induction circuit is notifiable under Part P. Gas hobs are connected only by Gas Safe registered engineers, and any new cooker hood should meet Approved Document F.

Homes within the New Forest or South Downs national parks, listed cottages and conservation areas may need consent for a new extractor vent or alterations to historic features.

Before you book flat-pack kitchen fitting in Southsea

If your Southsea home has plasterboard walls, mention it when you book the survey, as wall units may need extra fixings or timber behind the board.
If the flat-pack sink base in your Southsea kitchen sits beside a washing machine or dishwasher, ask for a sink base mat to protect the carcass floor.
Count the boxes against the delivery note when your flat-pack kitchen arrives in Southsea; orders can run to dozens of boxes and one short box can stall a fit.
Ask whether a sink base mat is included, and make sure every cut edge around the sink, waste and pipe holes is sealed.

Questions about flat-pack kitchen fitting in Southsea

How much does flat-pack kitchen fitting cost in Southsea?

Guide prices in Southsea are about £2,100 to £3,400 including VAT for a small flat-pack kitchen, built and fitted. The final price depends on the size of the kitchen and what is moving, and is set out in an itemised written quote.

Do you work near Southsea as well?

Yes. As well as Southsea itself, we cover the rest of Hampshire and nearby towns such as Portsmouth and Gosport. The process is the same wherever the kitchen is.

Are flat-pack wall units strong enough once they are hung?

Yes, when they are assembled and hung correctly. Wall units carry their load through the back panel and the hanging fixings, so the back must be fully fitted and the rail or brackets fixed into the wall with fixings that suit its construction. Plasterboard walls may need timber noggins or specialist fixings behind the board. We check the wall types at the survey and plan the fixings before the fit.

How do you make sure flat-pack cabinets are square?

Each carcass is built on a flat surface and measured corner to corner before its back panel goes in; equal diagonals mean it is square. The back panel then holds that shape. Units are checked again once they stand on their legs and are fixed together, because a carcass that is even slightly out of square shows up later as doors that never quite line up.

Can you fit a flat-pack kitchen I have already started building?

Yes, usually. We check any carcasses you have assembled for square, tight joints and properly fitted back panels before they are used, and rebuild any that are not right. Units built in another room are moved carefully, as a carcass without its worktop and wall fixings is easy to twist out of shape. We look at them on the survey and price the work accordingly.

Nearby places we cover

We also carry out flat-pack kitchen fitting in these towns near Southsea: