Flat-pack kitchen fitting in Havant

When does flat-pack kitchen fitting make sense in Havant?

Some people in Hampshire start building their own flat-pack units, then call in a fitter when the walls, worktops and connections turn out to be the harder part.

Landlords in Hampshire sometimes choose flat-pack kitchens for rented homes, because matching doors and replacement parts can often be bought again later if a unit is damaged. We work throughout Havant (PO9) and across the wider Hampshire area.

What is included in the work?

The exact scope is agreed after the survey, but a typical job in Havant covers:

Carcasses assembled on site on a flat surface and checked for square
Panels, plinths, sink, tap and appliance connections to existing points
Wall units hung on hanging rails or brackets fixed securely into the wall
Free survey visit to check the plan, the boxes and the room
Drawer boxes, runners and hinges assembled, fitted and adjusted to line up
Back panels fitted fully into their grooves or fixed as the instructions require

What should you budget for flat-pack kitchen fitting in Havant?

The figures below are guide prices for Havant, including VAT and adjusted for typical costs across the South East. The fixed price comes after we have measured up. Prices in the South East usually run above the national guide, mainly because labour and parking cost more.

What should you budget for flat-pack kitchen fitting in Havant?
Typical project	Guide price
Small flat-pack kitchen, built and fittedCarcasses assembled on site, then fitted as a rigid kitchen would be	£2,100–£3,400
Medium flat-pack kitchen, built and fittedAs above	£3,200–£4,800
Large flat-pack kitchen with tall units, built and fittedAs above	£4,600–£6,300

Flat-pack prices include assembling the carcasses on site and fitting units, doors, panels, plinths and laminate worktops with connections to existing points; stone worktops, new circuits, moved services, tiling and flooring are extra. Prices include VAT at 20%.

House types around Havant and what they mean for a kitchen

Typical homes in this part of Hampshire include Victorian terraces, 1930s semis, post-war estate houses and thatched and brick cottages. Terraces in Southampton and Portsmouth often have a narrow back kitchen, while post-war estate houses tend to have a compact rectangular room suited to an L-shape.

Water across Hampshire is mostly hard, largely from chalk sources, so limescale on taps and boiling water taps is common and a filter can help. Dense terraced streets can be very tight for parking, and New Forest lanes and village roads may limit the size of delivery vehicle.

Do you need approval for flat-pack kitchen fitting in Havant?

Assembling and fitting a flat-pack kitchen needs no planning permission in England; if the building is listed, listed building consent may be needed where the work affects its character. Electrics must meet BS 7671: extra sockets or spurs on an existing kitchen circuit are not notifiable, but a new cooker or induction circuit is notifiable under Part P. Gas hobs are connected only by Gas Safe registered engineers, and any new cooker hood should meet Approved Document F.

Homes within the New Forest or South Downs national parks, listed cottages and conservation areas may need consent for a new extractor vent or alterations to historic features.

Planning ahead

Count the boxes against the delivery note when your flat-pack kitchen arrives in Havant; orders can run to dozens of boxes and one short box can stall a fit.
Ask your supplier for a small bag of spare cams, dowels and hinge screws, so a lost fitting does not mean waiting days for a tiny part.
Set aside a room next to the kitchen in your Havant home for assembly, with enough floor space to lay a tall larder carcass down flat.
Ask whether a sink base mat is included, and make sure every cut edge around the sink, waste and pipe holes is sealed.

Questions about flat-pack kitchen fitting in Havant

How much does flat-pack kitchen fitting cost in Havant?

Guide prices in Havant are about £2,100 to £3,400 including VAT for a small flat-pack kitchen, built and fitted. The final price depends on the size of the kitchen and what is moving, and is set out in an itemised written quote.

Which parts of Havant do you work in?

All of them. Our Hampshire coverage takes in the whole of Havant, including the PO9 postcode district, as well as surrounding towns such as Emsworth. If you are unsure, send us your postcode.

How do you protect a flat-pack sink unit from water?

Mainly by sealing. Cut edges of board near the sink, including the holes for pipes and the waste, are sealed before the unit is fitted, and the worktop cut-out is sealed before the sink goes in. A sink base mat adds a second layer of protection against drips. Isolation valves on the supplies also mean that a later leak can be shut off quickly.

How do you make sure flat-pack cabinets are square?

Each carcass is built on a flat surface and measured corner to corner before its back panel goes in; equal diagonals mean it is square. The back panel then holds that shape. Units are checked again once they stand on their legs and are fixed together, because a carcass that is even slightly out of square shows up later as doors that never quite line up.

Can you fit a flat-pack kitchen I have already started building?

Yes, usually. We check any carcasses you have assembled for square, tight joints and properly fitted back panels before they are used, and rebuild any that are not right. Units built in another room are moved carefully, as a carcass without its worktop and wall fixings is easy to twist out of shape. We look at them on the survey and price the work accordingly.

Nearby places we cover

We also carry out flat-pack kitchen fitting in these towns near Havant: