Flat-pack kitchen fitting in Dundee

Is flat-pack kitchen fitting right for your Dundee kitchen?

A Dundee kitchen with uneven floors or walls that are out of true needs the same care whatever the units, and flat-pack carcasses gain most from being squared before they are scribed.

Some people in Dundee and Angus start building their own flat-pack units, then call in a fitter when the walls, worktops and connections turn out to be the harder part. If your home is in Dundee or close by in St Andrews or Forfar, the same survey, quote and fitting process applies.

What we cover for flat-pack kitchen fitting in Dundee

Here is what usually goes into flat-pack kitchen fitting, adjusted to your Dundee kitchen after we have measured it:

Wall units hung on hanging rails or brackets fixed securely into the wall
Drawer boxes, runners and hinges assembled, fitted and adjusted to line up
Laminate worktops cut and jointed, with cut edges sealed around the sink
Back panels fitted fully into their grooves or fixed as the instructions require
Base units levelled on adjustable legs and fixed to the wall and to each other
Panels, plinths, sink, tap and appliance connections to existing points

Guide prices for flat-pack kitchen fitting in Dundee

These guide ranges include VAT at 20% and are adjusted for prices in Scotland. We confirm your price in writing after a free survey visit. Prices in Scotland usually come in below the national guide, as labour rates are lower than in the South East.

Guide prices for flat-pack kitchen fitting in Dundee
Typical project	Guide price
Small flat-pack kitchen, built and fittedCarcasses assembled on site, then fitted as a rigid kitchen would be	£1,700–£2,800
Medium flat-pack kitchen, built and fittedAs above	£2,600–£3,900
Large flat-pack kitchen with tall units, built and fittedAs above	£3,800–£5,200

Flat-pack prices include assembling the carcasses on site and fitting units, doors, panels, plinths and laminate worktops with connections to existing points; stone worktops, new circuits, moved services, tiling and flooring are extra. Prices include VAT at 20%.

Local homes and their kitchens

Across Dundee and Angus you will often find sandstone tenement flats, Victorian villas, post-war council-built houses and fishing town cottages, and each shapes the kitchen differently. Dundee's tenement flats often have a narrow kitchen or a box room off the hall, while villas in Broughty Ferry and the Angus towns tend to have larger separate kitchens.

Dundee and Angus have soft mains water, so limescale is rarely an issue and taps and boiling water taps tend to stay free of heavy scale. Common stairs in tenements, steep streets in parts of Dundee and narrow glen roads in Angus can each affect deliveries and worktop lengths.

What rules apply to flat-pack kitchen fitting in Dundee?

In Scotland, fitting flat-pack units is not work that needs a building warrant, and most electrical work in a house does not need one either, but it must meet the building standards and BS 7671 and be certified. A gas hob or cooker must be connected by a Gas Safe registered engineer. If a new hood or extract fan is fitted, it should provide the kitchen extract ventilation that standard 3.14 expects.

Consent may be needed for new vents on listed buildings and in conservation areas, and homes in the upper Angus glens fall within the Cairngorms National Park.

Getting the most from your flat-pack kitchen fitting

Count the boxes against the delivery note when your flat-pack kitchen arrives in Dundee; orders can run to dozens of boxes and one short box can stall a fit.
If you are building some units yourself before the fit, leave the back panels and hinges for us to check before anything is fixed to the wall.
If the flat-pack sink base in your Dundee kitchen sits beside a washing machine or dishwasher, ask for a sink base mat to protect the carcass floor.
Keep every bag of cam fittings, dowels and screws with its own box, as parts for different units often look almost identical.

Questions about flat-pack kitchen fitting in Dundee

How much does flat-pack kitchen fitting cost in Dundee?

Guide prices in Dundee are about £1,700 to £2,800 including VAT for a small flat-pack kitchen, built and fitted. The final price depends on the size of the kitchen and what is moving, and is set out in an itemised written quote.

Which parts of Dundee do you work in?

All of them. Our Dundee and Angus coverage takes in the whole of Dundee, including the DD1 postcode district, as well as surrounding towns such as St Andrews. If you are unsure, send us your postcode.

Are flat-pack wall units strong enough once they are hung?

Yes, when they are assembled and hung correctly. Wall units carry their load through the back panel and the hanging fixings, so the back must be fully fitted and the rail or brackets fixed into the wall with fixings that suit its construction. Plasterboard walls may need timber noggins or specialist fixings behind the board. We check the wall types at the survey and plan the fixings before the fit.

How do you protect a flat-pack sink unit from water?

Mainly by sealing. Cut edges of board near the sink, including the holes for pipes and the waste, are sealed before the unit is fitted, and the worktop cut-out is sealed before the sink goes in. A sink base mat adds a second layer of protection against drips. Isolation valves on the supplies also mean that a later leak can be shut off quickly.

How do you make sure flat-pack cabinets are square?

Each carcass is built on a flat surface and measured corner to corner before its back panel goes in; equal diagonals mean it is square. The back panel then holds that shape. Units are checked again once they stand on their legs and are fixed together, because a carcass that is even slightly out of square shows up later as doors that never quite line up.

Also covering nearby towns

Close to Dundee? We cover these nearby towns too: