Flat-pack kitchen fitting in Brechin

Thinking about flat-pack kitchen fitting in Brechin?

If you have bought a flat-pack kitchen for your Brechin home to keep costs down, careful assembly makes sure that saving never shows in the finished kitchen.

Some people in Dundee and Angus start building their own flat-pack units, then call in a fitter when the walls, worktops and connections turn out to be the harder part. Kitchens in every part of Brechin are covered, and the survey visit is free wherever you are in Dundee and Angus.

What is included in the work?

Every kitchen is different, so we confirm the scope in writing. Most jobs of this kind include:

Wall units hung on hanging rails or brackets fixed securely into the wall
Drawer boxes, runners and hinges assembled, fitted and adjusted to line up
Back panels fitted fully into their grooves or fixed as the instructions require
Panels, plinths, sink, tap and appliance connections to existing points
Free survey visit to check the plan, the boxes and the room
Base units levelled on adjustable legs and fixed to the wall and to each other

Guide prices for flat-pack kitchen fitting in Brechin

The figures below are guide prices for Brechin, including VAT and adjusted for typical costs across Scotland. The fixed price comes after we have measured up. Costs across Scotland tend to sit under UK averages, which these ranges reflect.

Guide prices for flat-pack kitchen fitting in Brechin
Typical project	Guide price
Small flat-pack kitchen, built and fittedCarcasses assembled on site, then fitted as a rigid kitchen would be	£1,700–£2,800
Medium flat-pack kitchen, built and fittedAs above	£2,600–£3,900
Large flat-pack kitchen with tall units, built and fittedAs above	£3,800–£5,200

Flat-pack prices include assembling the carcasses on site and fitting units, doors, panels, plinths and laminate worktops with connections to existing points; stone worktops, new circuits, moved services, tiling and flooring are extra. Prices include VAT at 20%.

Local homes and their kitchens

The housing mix across Dundee and Angus includes sandstone tenement flats, Victorian villas, post-war council-built houses and fishing town cottages, so no two kitchen fits are quite alike. Dundee's tenement flats often have a narrow kitchen or a box room off the hall, while villas in Broughty Ferry and the Angus towns tend to have larger separate kitchens.

Common stairs in tenements, steep streets in parts of Dundee and narrow glen roads in Angus can each affect deliveries and worktop lengths. Dundee and Angus have soft mains water, so limescale is rarely an issue and taps and boiling water taps tend to stay free of heavy scale.

Do you need approval for flat-pack kitchen fitting in Brechin?

In Scotland, fitting flat-pack units is not work that needs a building warrant, and most electrical work in a house does not need one either, but it must meet the building standards and BS 7671 and be certified. A gas hob or cooker must be connected by a Gas Safe registered engineer. If a new hood or extract fan is fitted, it should provide the kitchen extract ventilation that standard 3.14 expects.

Consent may be needed for new vents on listed buildings and in conservation areas, and homes in the upper Angus glens fall within the Cairngorms National Park.

Before you book flat-pack kitchen fitting in Brechin

Count the boxes against the delivery note when your flat-pack kitchen arrives in Brechin; orders can run to dozens of boxes and one short box can stall a fit.
If the flat-pack sink base in your Brechin kitchen sits beside a washing machine or dishwasher, ask for a sink base mat to protect the carcass floor.
Stack flat-pack boxes flat on a level floor rather than on end, so that long side panels do not bow before they are assembled.
Clear a space next to the kitchen for assembly; carcasses need a flat floor and room to be checked for square before fitting.

Questions about flat-pack kitchen fitting in Brechin

How much does flat-pack kitchen fitting cost in Brechin?

Guide prices in Brechin are about £1,700 to £2,800 including VAT for a small flat-pack kitchen, built and fitted. The final price depends on the size of the kitchen and what is moving, and is set out in an itemised written quote.

Do you work near Brechin as well?

Yes. As well as Brechin itself, we cover the rest of Dundee and Angus and nearby towns such as Montrose and Forfar. The process is the same wherever the kitchen is.

How do you protect a flat-pack sink unit from water?

Mainly by sealing. Cut edges of board near the sink, including the holes for pipes and the waste, are sealed before the unit is fitted, and the worktop cut-out is sealed before the sink goes in. A sink base mat adds a second layer of protection against drips. Isolation valves on the supplies also mean that a later leak can be shut off quickly.

Are flat-pack wall units strong enough once they are hung?

Yes, when they are assembled and hung correctly. Wall units carry their load through the back panel and the hanging fixings, so the back must be fully fitted and the rail or brackets fixed into the wall with fixings that suit its construction. Plasterboard walls may need timber noggins or specialist fixings behind the board. We check the wall types at the survey and plan the fixings before the fit.

What is the difference between flat-pack and rigid kitchen units?

Rigid units arrive factory-assembled, usually glued and dowelled, so they are ready to fix. Flat-pack units arrive as boards and fittings in a box and are built on site. Both can make a good kitchen. Flat-pack is cheaper to buy and easier to carry into tight spaces, while rigid units save assembly time and come square from the factory, which is why the fitting labour is a little lower.

Flat-pack kitchen fitting near Brechin

We also carry out flat-pack kitchen fitting in these towns near Brechin: