Flat-pack kitchen fitting · Scotland
Flat-pack kitchen fitting in Dundee and Angus
Homeowners and landlords across Dundee and Angus can book us for flat-pack kitchen fitting: flat-pack kitchen units built square on site, then fitted, levelled and finished like rigid units.
When does flat-pack kitchen fitting make sense in Dundee and Angus?
If you have bought a flat-pack kitchen for your Dundee and Angus home to keep costs down, careful assembly makes sure that saving never shows in the finished kitchen.
A Dundee and Angus kitchen with uneven floors or walls that are out of true needs the same care whatever the units, and flat-pack carcasses gain most from being squared before they are scribed.
What does flat-pack kitchen fitting in Dundee and Angus include?
Your written quote lists everything included. For flat-pack kitchen fitting, that normally means:
- Free survey visit to check the plan, the boxes and the room
- Carcasses assembled on site on a flat surface and checked for square
- Back panels fitted fully into their grooves or fixed as the instructions require
- Base units levelled on adjustable legs and fixed to the wall and to each other
- Wall units hung on hanging rails or brackets fixed securely into the wall
- Drawer boxes, runners and hinges assembled, fitted and adjusted to line up
- Laminate worktops cut and jointed, with cut edges sealed around the sink
- Panels, plinths, sink, tap and appliance connections to existing points
How much does flat-pack kitchen fitting cost in Dundee and Angus?
Typical flat-pack kitchen fitting prices for homes in Dundee and Angus, including VAT and adjusted for Scotland. Your own figure depends on the size of the kitchen, the layout and what is moving. Labour rates in Scotland are generally lower than in London and the South East, so these ranges are a little below the national guide.
| Typical project | Guide price |
|---|---|
| Small flat-pack kitchen, built and fittedCarcasses assembled on site, then fitted as a rigid kitchen would be | £1,700–£2,800 |
| Medium flat-pack kitchen, built and fittedAs above | £2,600–£3,900 |
| Large flat-pack kitchen with tall units, built and fittedAs above | £3,800–£5,200 |
Flat-pack prices include assembling the carcasses on site and fitting units, doors, panels, plinths and laminate worktops with connections to existing points; stone worktops, new circuits, moved services, tiling and flooring are extra. Prices include VAT at 20%.
Kitchens in homes across Dundee and Angus
The housing mix across Dundee and Angus includes sandstone tenement flats, Victorian villas, post-war council-built houses and fishing town cottages, so no two kitchen fits are quite alike. Dundee's tenement flats often have a narrow kitchen or a box room off the hall, while villas in Broughty Ferry and the Angus towns tend to have larger separate kitchens.
Dundee and Angus have soft mains water, so limescale is rarely an issue and taps and boiling water taps tend to stay free of heavy scale. Common stairs in tenements, steep streets in parts of Dundee and narrow glen roads in Angus can each affect deliveries and worktop lengths.
Tenement flats often have a small kitchen that owners open into the living room, which needs a building warrant if a load-bearing wall is involved, and can need one even if it is not, where the change affects the escape route or fire separation. Victorian villa kitchens may sit in an old scullery area with high ceilings and original features.
Rules for flat-pack kitchen fitting in Dundee and Angus
In Scotland, fitting flat-pack units is not work that needs a building warrant, and most electrical work in a house does not need one either, but it must meet the building standards and BS 7671 and be certified. A gas hob or cooker must be connected by a Gas Safe registered engineer. If a new hood or extract fan is fitted, it should provide the kitchen extract ventilation that standard 3.14 expects.
Consent may be needed for new vents on listed buildings and in conservation areas, and homes in the upper Angus glens fall within the Cairngorms National Park.
Before you start
- Clear a space next to the kitchen for assembly; carcasses need a flat floor and room to be checked for square before fitting.
- Wall unit fixings need to suit your walls, because plasterboard, old lime plaster and solid brick each call for a different approach.
- Ask whether a sink base mat is included, and make sure every cut edge around the sink, waste and pipe holes is sealed.
- Look at the back panels supplied; thin backs rely on being fitted correctly into their grooves to keep each carcass square and rigid.
- Set aside a room next to the kitchen in your Dundee and Angus home for assembly, with enough floor space to lay a tall larder carcass down flat.
- Keep every instruction leaflet; each one shows the cam, dowel and hinge positions for that unit and saves time during assembly.
Questions about flat-pack kitchen fitting in Dundee and Angus
How much does flat-pack kitchen fitting cost in Dundee and Angus?
Flat-pack kitchen fitting in Dundee and Angus typically costs £1,700 to £2,800 including VAT for a small flat-pack kitchen, built and fitted, based on prices in Scotland. Larger or more involved jobs cost more, and your price is fixed in writing after a free survey visit.
Do you cover the whole of Dundee and Angus?
Yes. We carry out flat-pack kitchen fitting across Dundee and Angus, including Dundee, Arbroath, Forfar and Montrose. Every job starts with a free survey visit and an itemised written quote.
Can you fit a flat-pack kitchen I have already started building?
Yes, usually. We check any carcasses you have assembled for square, tight joints and properly fitted back panels before they are used, and rebuild any that are not right. Units built in another room are moved carefully, as a carcass without its worktop and wall fixings is easy to twist out of shape. We look at them on the survey and price the work accordingly.
What is the difference between flat-pack and rigid kitchen units?
Rigid units arrive factory-assembled, usually glued and dowelled, so they are ready to fix. Flat-pack units arrive as boards and fittings in a box and are built on site. Both can make a good kitchen. Flat-pack is cheaper to buy and easier to carry into tight spaces, while rigid units save assembly time and come square from the factory, which is why the fitting labour is a little lower.
How do you protect a flat-pack sink unit from water?
Mainly by sealing. Cut edges of board near the sink, including the holes for pipes and the waste, are sealed before the unit is fitted, and the worktop cut-out is sealed before the sink goes in. A sink base mat adds a second layer of protection against drips. Isolation valves on the supplies also mean that a later leak can be shut off quickly.
Flat-pack kitchen fitting in towns across Dundee and Angus
Choose a town for local guide prices and postcode coverage:
- Flat-pack kitchen fitting in Dundee
- Flat-pack kitchen fitting in Arbroath
- Flat-pack kitchen fitting in Forfar
- Flat-pack kitchen fitting in Montrose
- Flat-pack kitchen fitting in Brechin