Flat-pack kitchen fitting in Blackheath

What prompts flat-pack kitchen fitting in Blackheath?

If your kitchen is in a Blackheath flat or a small terrace with no room for a delivery of built cabinets, flat-pack units can be assembled in the room itself.

Flat-pack is a common choice in Blackheath when units have to go up narrow stairs to a flat, because boxed boards are far easier to carry than built cabinets. Our Greater London coverage reaches every part of Blackheath (SE3) and out towards Greenwich.

What does the job involve?

The exact scope is agreed after the survey, but a typical job in Blackheath covers:

Free survey visit to check the plan, the boxes and the room
Carcasses assembled on site on a flat surface and checked for square
Back panels fitted fully into their grooves or fixed as the instructions require
Wall units hung on hanging rails or brackets fixed securely into the wall
Panels, plinths, sink, tap and appliance connections to existing points
Base units levelled on adjustable legs and fixed to the wall and to each other

What does flat-pack kitchen fitting cost in Blackheath?

Use these ranges to plan your budget. They include VAT, reflect costs in London, and are firmed up once we have seen your Blackheath kitchen. Prices in London usually run above the national guide, mainly because labour and parking cost more.

What does flat-pack kitchen fitting cost in Blackheath?
Typical project	Guide price
Small flat-pack kitchen, built and fittedCarcasses assembled on site, then fitted as a rigid kitchen would be	£2,300–£3,900
Medium flat-pack kitchen, built and fittedAs above	£3,600–£5,500
Large flat-pack kitchen with tall units, built and fittedAs above	£5,200–£7,200

Flat-pack prices include assembling the carcasses on site and fitting units, doors, panels, plinths and laminate worktops with connections to existing points; stone worktops, new circuits, moved services, tiling and flooring are extra. Prices include VAT at 20%.

Kitchens in homes around Blackheath

You will find Victorian and Edwardian terraces, conversion flats, mansion block flats and 1930s semis throughout Greater London. Victorian terraces often have a narrow galley beside the side return, while conversion flats and mansion blocks usually fit the kitchen into a small room or along one living-room wall.

London's mains water is hard, so limescale builds quickly on taps and boiling water taps, and a scale-reducing filter is worth planning in. Permit parking, red routes and flats without lifts are common, so parking suspensions, stair carries and lift bookings may need arranging before delivery day.

Building regulations, electrics and gas in Blackheath

Assembling and fitting a flat-pack kitchen needs no planning permission in England; if the building is listed, listed building consent may be needed where the work affects its character. Electrics must meet BS 7671: extra sockets or spurs on an existing kitchen circuit are not notifiable, but a new cooker or induction circuit is notifiable under Part P. Gas hobs are connected only by Gas Safe registered engineers, and any new cooker hood should meet Approved Document F.

Conservation areas are widespread across London, so a new extractor vent on a front wall may need permission, and leaseholders usually need the freeholder's written consent first.

Planning ahead

Set aside a room next to the kitchen in your Blackheath home for assembly, with enough floor space to lay a tall larder carcass down flat.
If the flat-pack sink base in your Blackheath kitchen sits beside a washing machine or dishwasher, ask for a sink base mat to protect the carcass floor.
If you are building some units yourself before the fit, leave the back panels and hinges for us to check before anything is fixed to the wall.
Look at the back panels supplied; thin backs rely on being fitted correctly into their grooves to keep each carcass square and rigid.

Questions about flat-pack kitchen fitting in Blackheath

How much does flat-pack kitchen fitting cost in Blackheath?

Guide prices in Blackheath are about £2,300 to £3,900 including VAT for a small flat-pack kitchen, built and fitted. The final price depends on the size of the kitchen and what is moving, and is set out in an itemised written quote.

Which parts of Blackheath do you work in?

All of them. Our Greater London coverage takes in the whole of Blackheath, including the SE3 postcode district, as well as surrounding towns such as Greenwich. If you are unsure, send us your postcode.

How do you protect a flat-pack sink unit from water?

Mainly by sealing. Cut edges of board near the sink, including the holes for pipes and the waste, are sealed before the unit is fitted, and the worktop cut-out is sealed before the sink goes in. A sink base mat adds a second layer of protection against drips. Isolation valves on the supplies also mean that a later leak can be shut off quickly.

Are flat-pack wall units strong enough once they are hung?

Yes, when they are assembled and hung correctly. Wall units carry their load through the back panel and the hanging fixings, so the back must be fully fitted and the rail or brackets fixed into the wall with fixings that suit its construction. Plasterboard walls may need timber noggins or specialist fixings behind the board. We check the wall types at the survey and plan the fixings before the fit.

How do you make sure flat-pack cabinets are square?

Each carcass is built on a flat surface and measured corner to corner before its back panel goes in; equal diagonals mean it is square. The back panel then holds that shape. Units are checked again once they stand on their legs and are fixed together, because a carcass that is even slightly out of square shows up later as doors that never quite line up.

Flat-pack kitchen fitting in neighbouring towns

The same service is available a short drive from Blackheath, including: