Sink and tap installation · Hampshire
Sink and tap installation in Andover
Sink and tap installation in Andover starts with a free survey visit: we measure up, check the walls, floor and service positions, and explain what the job involves before anything is priced.
Why sink and tap installation for an Andover home?
Landlords in Hampshire often swap tired sinks and taps between tenancies, choosing hard-wearing finishes and accessible valves so that later repairs are quick and cheap.
If you are fitting new stone worktops in your Andover kitchen, it is a natural point to change to an undermount sink cut and polished by the fabricator. Andover sits about 22 miles north of Southampton, and our Hampshire coverage takes in everything in between.
What does the job involve?
After the survey visit we write the scope down. For sink and tap installation in Andover it usually covers:
- Waste, overflow and trap fitted, with dishwasher and washing machine waste connections
- Inset sink cut-outs made on site in laminate and wood worktops
- Boiling water tap fitted with its tank, filter and power supply in the cupboard
- Isolation valves on the hot and cold supplies, with flexible tap tails connected
- Every joint leak tested, with water flow and drainage checked before handover
- Sink moved to a new position with new supply and waste runs
How much does sink and tap installation cost in Andover?
The figures below are guide prices for Andover, including VAT and adjusted for typical costs across the South East. The fixed price comes after we have measured up. Expect costs in the South East to sit somewhat above UK averages, reflecting local labour rates.
| Typical project | Guide price |
|---|---|
| Sink and tap plumbed inIsolation valves, waste and trap | £230–£460 |
| Boiling water tap installedTank under the sink, filter and power supply | £170–£400 |
| Sink moved to a new positionNew supplies and waste run | £460–£1,200 |
| Undermount sink in a stone worktopCut-out and polishing are done by the stone fabricator | Priced with the worktop |
Guide ranges cover labour and fittings such as valves, tails and wastes; the sink and tap themselves are extra, and undermount cut-outs in stone are priced with the worktop by the fabricator. Prices include VAT at 20%.
What kind of kitchens do we fit in Andover?
You will find Victorian terraces, 1930s semis, post-war estate houses and thatched and brick cottages throughout Hampshire. Terraces in Southampton and Portsmouth often have a narrow back kitchen, while post-war estate houses tend to have a compact rectangular room suited to an L-shape.
Water across Hampshire is mostly hard, largely from chalk sources, so limescale on taps and boiling water taps is common and a filter can help. Dense terraced streets can be very tight for parking, and New Forest lanes and village roads may limit the size of delivery vehicle.
Do you need approval for sink and tap installation in Andover?
Replacing a sink and tap needs no approval in England, but the plumbing should meet the Water Supply (Water Fittings) Regulations 1999, including isolation valves and backflow protection. Connecting to an existing waste is routine, while a new connection to an underground drain involves building control. A new spur for a boiling water tap on an existing kitchen circuit is not notifiable under Part P, but it must meet BS 7671.
Homes within the New Forest or South Downs national parks, listed cottages and conservation areas may need consent for a new extractor vent or alterations to historic features.
Practical advice for Andover homeowners
- Ask whether a boiling water tap for your kitchen in Hampshire needs a filter, how often it should be changed and where it will sit in the cupboard.
- Empty the sink cupboard before fitting day, and plan where cleaning products will go while the waste, trap and valves are being changed.
- For a ceramic farmhouse-style sink in your Andover kitchen, confirm the base unit is designed for it, as a standard sink unit may not carry the weight.
- An undermount sink in a stone worktop is cut and polished by the fabricator, so choose the sink before the worktops are templated.
Questions about sink and tap installation in Andover
How much does sink and tap installation cost in Andover?
For plumbing in a new sink and tap, budget around £230 to £460 including VAT in Andover. That reflects typical costs in the South East; we confirm the actual figure in writing once we have measured up.
Can you measure up in Andover before quoting?
Yes. Every quote starts with a free, no-obligation survey visit to your home in Andover. We measure the room, check the walls, floor and service positions, then send an itemised written quote.
Can a dishwasher and washing machine drain through the sink waste?
Yes, in most kitchens. The sink trap can take an appliance connection on a spigot, or a separate standpipe can be fitted. The appliance hose needs to rise to the height its manufacturer specifies before it drops to the waste, so dirty water cannot siphon back. Two appliances can usually share a double-spigot trap, which we plan with the sink.
What do I need for a boiling water tap?
A boiling water tap needs a tank in the cupboard under the sink, usually a socket or fused spur to power it, and often a filter, particularly where the water is hard. Some models have a minimum water pressure, so check yours before buying. The tap also needs a correctly sized hole in the sink or worktop and enough clear cupboard space for the tank and pipework.
Do I need isolation valves under my kitchen sink?
They are strongly advised, and we fit them as standard. An isolation valve on each supply to the tap, and on each appliance supply, lets you turn off the water to one fitting without shutting off the whole house. That makes changing a tap cartridge or dealing with a leak far simpler. The valves are left where they can still be reached once the cupboard is in use.
Sink and tap installation near Andover
Neighbouring towns where we offer sink and tap installation:
- Sink and tap installation in Winchester
- Sink and tap installation in Newbury
- Sink and tap installation in Romsey
- Sink and tap installation in Salisbury
- Sink and tap installation in Thatcham
- Sink and tap installation in Marlborough
- Sink and tap installation across Hampshire