Fit-only kitchen fitting in Consett

Is fit-only kitchen fitting right for your Consett kitchen?

If your kitchen is ordered for delivery to your Consett home and the retailer does not offer fitting, fit only covers the labour to put it in properly.

People in County Durham who have bought from a trade counter often want a fitter who will check the plan against the room before any boxes are opened. Consett sits about 25 miles north-west of Darlington, and our County Durham coverage takes in everything in between.

What is in a typical job?

After the survey visit we write the scope down. For fit-only kitchen fitting in Consett it usually covers:

Sink, tap and appliances connected to the existing water, waste and power points
Base, wall and tall units positioned, levelled on their legs and fixed to the wall
End panels, filler panels, plinths, cornice and light rail scribed and fitted
Doors and drawer fronts hung and adjusted, with handles drilled and fitted
Laminate or wood worktops cut, jointed, sealed and fixed down
Packaging and offcuts cleared, with removal of the old kitchen available as an extra

Fit-only kitchen fitting prices in Consett

The figures below are guide prices for Consett, including VAT and adjusted for typical costs across the North East. The fixed price comes after we have measured up. Costs across the North East tend to sit under UK averages, which these ranges reflect.

Fit-only kitchen fitting prices in Consett
Typical project	Guide price
Small kitchen (5–10 units)Labour to fit units, doors, laminate worktops and panels you have bought	£1,400–£2,200
Medium kitchen (10–15 units)As above	£2,200–£3,200
Large kitchen (15+ units, island or tall larders)As above	£3,200–£4,000
Fitter day rateOne fitter; a two-person team is usually £300–£450 per day	£160–£250 per day

Fit-only prices cover labour for units, doors, panels, plinths and laminate worktops with connections to existing points; stone worktops, new circuits, moved plumbing, gas connections, tiling, flooring and plastering are extra. Prices include VAT at 20%.

Kitchens in homes around Consett

Across County Durham you will often find colliery terraces, 1930s semis, post-war council-built houses and stone-built village houses, and each shapes the kitchen differently. Colliery terraces often have a small back kitchen in the rear offshoot, while 1930s semis usually have a square kitchen that can open into the dining room.

Hardness varies across County Durham and the Tees area, from fairly soft to hard in places, so check with your water supplier before choosing a filter. Older terraced streets often have back lanes that help with deliveries, but rear yards and narrow gates may still limit how long worktops get in.

Building regulations, electrics and gas in Consett

Fitting kitchen units you have bought needs no planning permission in England, although a listed building may need listed building consent for work that affects its character. Adding sockets or spurs to an existing kitchen circuit is not notifiable but must meet BS 7671, while a new cooker circuit is notifiable under Part P and certified through a competent person scheme or building control. Gas hobs are connected only by Gas Safe registered engineers.

Listed homes and houses in conservation areas, such as the historic centre of Durham, may need consent for a new external vent or for removing original features.

Before you book fit-only kitchen fitting in Consett

Order handles in the right quantity with one or two spares; doors and drawers cannot be finished without them, and missing handles hold up sign-off.
If you buy a worktop for a Consett kitchen yourself, check its length covers the longest run plus enough spare for joints and end trims.
Keep using the old kitchen until fitting day if you can, and ask for its removal and disposal to be priced on the same quote.
Check the order includes filler panels, end panels, plinths, cornice or light rail, and enough legs and plinth clips for every base unit.

Questions about fit-only kitchen fitting in Consett

How much does fit-only kitchen fitting cost in Consett?

Guide prices in Consett are about £1,400 to £2,200 including VAT for a small kitchen of 5 to 10 units. The final price depends on the size of the kitchen and what is moving, and is set out in an itemised written quote.

Which parts of Consett do you work in?

All of them. Our County Durham coverage takes in the whole of Consett, including the DH8 postcode district, as well as surrounding towns such as Stanley. If you are unsure, send us your postcode.

What happens if parts of my kitchen are missing or damaged?

Missing or damaged parts are the supplier's to replace. We check the delivery against your plan and delivery note before fitting starts and tell you straight away if anything is short, broken or wrong, so you can raise it with the supplier while we re-plan the order of work. Units that do not depend on the missing part can often still go in, and sealed boxes make any claim simpler.

What does fit-only kitchen fitting not include?

It does not include stone worktops, new electrical circuits, moved plumbing, gas connections, tiling, flooring or plastering. Stone is templated and fitted by the stone supplier or fabricator once the base units are fixed. Fit only covers the labour for units, doors, panels, plinths and laminate worktops, with connections to the points already in place. Any of the extras can be added as separate lines on the same written quote.

Do I need to order anything extra for a fit-only job?

Often, yes. Retail plans regularly leave out filler panels, end panels, plinths, cornice or light rail, legs and plinth clips, worktop joint strips or connector bolts, appliance door-fixing kits and the sink, tap and waste. On the survey we go through your order line by line and list anything missing, so it can be ordered before the fit rather than halting it halfway through.

Nearby places we cover

The same service is available a short drive from Consett, including: