Fit-only kitchen fitting in Gateshead

Why fit-only kitchen fitting for a Gateshead home?

Landlords and small developers across Tyne and Wear sometimes buy units for several properties at once and want a clear fit-only price for each kitchen they need installed.

Some Gateshead households have a kitchen waiting in a spare room after a fitter dropped out, and need the boxes checked and the fit planned again from the start. We work throughout Gateshead (NE8) and across the wider Tyne and Wear area.

What does the job involve?

The exact scope is agreed after the survey, but a typical job in Gateshead covers:

Packaging and offcuts cleared, with removal of the old kitchen available as an extra
Laminate or wood worktops cut, jointed, sealed and fixed down
Free survey visit to check your plan, the room and the service positions
Delivery checked against the plan and delivery note before fitting starts
End panels, filler panels, plinths, cornice and light rail scribed and fitted
Sink, tap and appliances connected to the existing water, waste and power points

What should you budget for fit-only kitchen fitting in Gateshead?

Typical fit-only kitchen fitting prices for homes in Gateshead, including VAT and adjusted for the North East. Your own figure depends on the size of the kitchen, the layout and what is moving. Labour rates in the North East are generally lower than in London and the South East, so these ranges are a little below the national guide.

What should you budget for fit-only kitchen fitting in Gateshead?
Typical project	Guide price
Small kitchen (5–10 units)Labour to fit units, doors, laminate worktops and panels you have bought	£1,400–£2,200
Medium kitchen (10–15 units)As above	£2,200–£3,200
Large kitchen (15+ units, island or tall larders)As above	£3,200–£4,000
Fitter day rateOne fitter; a two-person team is usually £300–£450 per day	£160–£250 per day

Fit-only prices cover labour for units, doors, panels, plinths and laminate worktops with connections to existing points; stone worktops, new circuits, moved plumbing, gas connections, tiling, flooring and plastering are extra. Prices include VAT at 20%.

Fitting kitchens in older and newer Gateshead homes

The housing mix across Tyne and Wear includes tyneside flats, Victorian terraces, 1930s semis and post-war council-built houses, so no two kitchen fits are quite alike. Tyneside flats often have a narrow kitchen in the rear offshoot, while 1930s semis and ex-council houses tend to have a small square kitchen at the back.

Hardness varies across Tyne and Wear, from fairly soft around Newcastle to harder in parts of Sunderland, so check with your supplier before choosing a filter. Back lanes behind terraced streets can help deliveries, but upper Tyneside flats have their own internal stair, so long worktops need careful handling.

Building regulations, electrics and gas in Gateshead

Fitting kitchen units you have bought needs no planning permission in England, although a listed building may need listed building consent for work that affects its character. Adding sockets or spurs to an existing kitchen circuit is not notifiable but must meet BS 7671, while a new cooker circuit is notifiable under Part P and certified through a competent person scheme or building control. Gas hobs are connected only by Gas Safe registered engineers.

In conservation areas and listed buildings, such as parts of central Newcastle and Tynemouth, a new external vent or changes to historic features may need consent.

Before you book fit-only kitchen fitting in Gateshead

Book the fit for a date after the full delivery has arrived in Tyne and Wear; a split delivery is a common reason for a fit stalling halfway.
Keep using the old kitchen until fitting day if you can, and ask for its removal and disposal to be priced on the same quote.
Ask your supplier for the full order list as well as the plan, so the fitter can check part numbers and not just unit sizes.
Check the order includes filler panels, end panels, plinths, cornice or light rail, and enough legs and plinth clips for every base unit.

Questions about fit-only kitchen fitting in Gateshead

How much does fit-only kitchen fitting cost in Gateshead?

Fit-only kitchen fitting in Gateshead typically costs £1,400 to £2,200 including VAT for a small kitchen of 5 to 10 units, based on prices in the North East. Larger or more involved jobs cost more, and your price is fixed in writing after a free survey visit.

Do you work near Gateshead as well?

Yes. As well as Gateshead itself, we cover the rest of Tyne and Wear and nearby towns such as Newcastle upon Tyne and Felling. The process is the same wherever the kitchen is.

Do I need to order anything extra for a fit-only job?

Often, yes. Retail plans regularly leave out filler panels, end panels, plinths, cornice or light rail, legs and plinth clips, worktop joint strips or connector bolts, appliance door-fixing kits and the sink, tap and waste. On the survey we go through your order line by line and list anything missing, so it can be ordered before the fit rather than halting it halfway through.

What does fit-only kitchen fitting not include?

It does not include stone worktops, new electrical circuits, moved plumbing, gas connections, tiling, flooring or plastering. Stone is templated and fitted by the stone supplier or fabricator once the base units are fixed. Fit only covers the labour for units, doors, panels, plinths and laminate worktops, with connections to the points already in place. Any of the extras can be added as separate lines on the same written quote.

Should I unpack my kitchen before the fitter arrives?

No. Leave everything in its packaging until fitting day. Sealed boxes protect doors and panels from knocks and dust, keep small parts with the right unit, and show that any damage happened before delivery. We open and check the boxes against the plan as the fit begins. The one exception is anything your supplier asks you to inspect on delivery, which you should check and report within their deadline.

Fit-only kitchen fitting near Gateshead

We also carry out fit-only kitchen fitting in these towns near Gateshead: