Fit-only kitchen fitting in Newburn

When does fit-only kitchen fitting make sense in Newburn?

If your kitchen is ordered for delivery to your Newburn home and the retailer does not offer fitting, fit only covers the labour to put it in properly.

People in Tyne and Wear who have bought from a trade counter often want a fitter who will check the plan against the room before any boxes are opened. If your home is in Newburn or close by in Gosforth or Newcastle upon Tyne, the same survey, quote and fitting process applies.

What we cover for fit-only kitchen fitting in Newburn

After the survey visit we write the scope down. For fit-only kitchen fitting in Newburn it usually covers:

Sink, tap and appliances connected to the existing water, waste and power points
Packaging and offcuts cleared, with removal of the old kitchen available as an extra
Free survey visit to check your plan, the room and the service positions
End panels, filler panels, plinths, cornice and light rail scribed and fitted
Delivery checked against the plan and delivery note before fitting starts
Doors and drawer fronts hung and adjusted, with handles drilled and fitted

Guide prices for fit-only kitchen fitting in Newburn

These guide ranges include VAT at 20% and are adjusted for prices in the North East. We confirm your price in writing after a free survey visit. Labour rates in the North East are generally lower than in London and the South East, so these ranges are a little below the national guide.

Guide prices for fit-only kitchen fitting in Newburn
Typical project	Guide price
Small kitchen (5–10 units)Labour to fit units, doors, laminate worktops and panels you have bought	£1,400–£2,200
Medium kitchen (10–15 units)As above	£2,200–£3,200
Large kitchen (15+ units, island or tall larders)As above	£3,200–£4,000
Fitter day rateOne fitter; a two-person team is usually £300–£450 per day	£160–£250 per day

Fit-only prices cover labour for units, doors, panels, plinths and laminate worktops with connections to existing points; stone worktops, new circuits, moved plumbing, gas connections, tiling, flooring and plastering are extra. Prices include VAT at 20%.

What kind of kitchens do we fit in Newburn?

Typical homes in this part of Tyne and Wear include tyneside flats, Victorian terraces, 1930s semis and post-war council-built houses. Tyneside flats often have a narrow kitchen in the rear offshoot, while 1930s semis and ex-council houses tend to have a small square kitchen at the back.

Back lanes behind terraced streets can help deliveries, but upper Tyneside flats have their own internal stair, so long worktops need careful handling. Hardness varies across Tyne and Wear, from fairly soft around Newcastle to harder in parts of Sunderland, so check with your supplier before choosing a filter.

What rules apply to fit-only kitchen fitting in Newburn?

Fitting kitchen units you have bought needs no planning permission in England, although a listed building may need listed building consent for work that affects its character. Adding sockets or spurs to an existing kitchen circuit is not notifiable but must meet BS 7671, while a new cooker circuit is notifiable under Part P and certified through a competent person scheme or building control. Gas hobs are connected only by Gas Safe registered engineers.

In conservation areas and listed buildings, such as parts of central Newcastle and Tynemouth, a new external vent or changes to historic features may need consent.

Worth knowing before the fit

Leave appliance manuals in their boxes; they give the housing sizes and ventilation gaps needed to install each appliance correctly in your Newburn kitchen.
Photograph each pallet and any damaged box as it arrives at your Newburn address, and note the damage on the delivery note before the driver leaves.
Ask your supplier for the full order list as well as the plan, so the fitter can check part numbers and not just unit sizes.
Worktop joint strips or connector bolts, appliance door-fixing kits and the sink, tap and waste are easy to leave off an order.

Questions about fit-only kitchen fitting in Newburn

How much does fit-only kitchen fitting cost in Newburn?

Fit-only kitchen fitting in Newburn typically costs £1,400 to £2,200 including VAT for a small kitchen of 5 to 10 units, based on prices in the North East. Larger or more involved jobs cost more, and your price is fixed in writing after a free survey visit.

Do you cover all of Newburn?

Yes. We work across Newburn, including the NE15 postcode district, and nearby towns such as Gosforth and Newcastle upon Tyne. Book a free survey visit and we will arrange a time that suits you.

Should I unpack my kitchen before the fitter arrives?

No. Leave everything in its packaging until fitting day. Sealed boxes protect doors and panels from knocks and dust, keep small parts with the right unit, and show that any damage happened before delivery. We open and check the boxes against the plan as the fit begins. The one exception is anything your supplier asks you to inspect on delivery, which you should check and report within their deadline.

Do I need to order anything extra for a fit-only job?

Often, yes. Retail plans regularly leave out filler panels, end panels, plinths, cornice or light rail, legs and plinth clips, worktop joint strips or connector bolts, appliance door-fixing kits and the sink, tap and waste. On the survey we go through your order line by line and list anything missing, so it can be ordered before the fit rather than halting it halfway through.

What happens if parts of my kitchen are missing or damaged?

Missing or damaged parts are the supplier's to replace. We check the delivery against your plan and delivery note before fitting starts and tell you straight away if anything is short, broken or wrong, so you can raise it with the supplier while we re-plan the order of work. Units that do not depend on the missing part can often still go in, and sealed boxes make any claim simpler.

Fit-only kitchen fitting near Newburn

Neighbouring towns where we offer fit-only kitchen fitting: