Cooker hood installation in Consett

When does cooker hood installation make sense in Consett?

People in flats across County Durham sometimes rely on recirculating hoods because an outside vent needs consent from the building's owners, and want to know what else improves ventilation.

If your Consett house has thick solid walls, core drilling a neat hole for the duct takes the right equipment and careful positioning of the outside grille. We cover all of Consett, including the DH8 postcode district, and travel out to neighbouring towns across County Durham.

What does cooker hood installation in Consett include?

Every kitchen is different, so we confirm the scope in writing. Most jobs of this kind include:

Core drilling through the outside wall and an external grille fitted and sealed
Power supply connected by an electrician and tested to BS 7671
Island and ceiling hoods fixed into the ceiling structure by two people
Survey of the hob position, duct route, outside wall and any open-flued appliance
Short, straight runs of rigid ducting wherever the route allows
Recirculating hoods fitted with carbon filters, and their limits explained

Cooker hood installation prices in Consett

Typical cooker hood installation prices for homes in Consett, including VAT and adjusted for the North East. Your own figure depends on the size of the kitchen, the layout and what is moving. Labour rates in the North East are generally lower than in London and the South East, so these ranges are a little below the national guide.

Cooker hood installation prices in Consett
Typical project	Guide price
Like-for-like cooker hood swapSame position and ducting	£110–£220
New ducted hood through an outside wallCore drilling, ducting run and external grille	£270–£810
Island or ceiling hood installedTwo-person install, fixings to the ceiling structure	£270–£570
Recirculating hood fittedNo ducting; carbon filters need replacing	£110–£270

Guide ranges cover fitting and connection with standard ducting through a straightforward wall; long or concealed duct runs, ceiling repairs, new electrical spurs, spillage tests and the hood itself are priced separately. Prices include VAT at 20%.

Local homes and their kitchens

Typical homes in this part of County Durham include colliery terraces, 1930s semis, post-war council-built houses and stone-built village houses. Colliery terraces often have a small back kitchen in the rear offshoot, while 1930s semis usually have a square kitchen that can open into the dining room.

Hardness varies across County Durham and the Tees area, from fairly soft to hard in places, so check with your water supplier before choosing a filter. Older terraced streets often have back lanes that help with deliveries, but rear yards and narrow gates may still limit how long worktops get in.

Do you need approval for cooker hood installation in Consett?

In England, Approved Document F guidance for kitchen extract is about 30 litres per second from a cooker hood extracting outside, or 60 litres per second from a fan elsewhere in the room. A recirculating hood does not remove moisture, so another means of extract is usually needed. A new vent through the outside wall of a flat may need planning permission and the freeholder's consent, and an open-flued gas appliance in the room calls for a spillage test.

Listed homes and houses in conservation areas, such as the historic centre of Durham, may need consent for a new external vent or for removing original features.

Before you book cooker hood installation in Consett

Choose a hood at least as wide as your hob, and compare its stated extraction rate with the size of the room before you buy.
For an island hood in your Consett kitchen, settle the hood position before the ceiling is boarded, so timber supports can be added in the right place.
Before choosing a hood for your Consett kitchen, find the nearest outside wall to the hob, because the shorter the duct run, the better the extraction.
Check the minimum height above the hob in both the hood and hob instructions, and use the greater of the two figures.

Questions about cooker hood installation in Consett

How much does cooker hood installation cost in Consett?

Cooker hood installation in Consett typically costs £110 to £220 including VAT for a like-for-like cooker hood swap, based on prices in the North East. Larger or more involved jobs cost more, and your price is fixed in writing after a free survey visit.

Do you cover all of Consett?

Yes. We work across Consett, including the DH8 postcode district, and nearby towns such as Stanley and Newburn. Book a free survey visit and we will arrange a time that suits you.

Why might a cooker hood need a spillage test?

Because a hood pulling air out of a room can draw fumes back down the flue of an open-flued gas appliance, such as some older boilers or gas fires. Where the kitchen, or a room open to it, has one, a Gas Safe registered engineer should carry out a spillage test with the hood running at full speed. Room-sealed boilers are not affected in the same way.

Can a ducted cooker hood be fitted in a flat?

Often, but check consents first. A new vent through the outside wall of a flat may need planning permission and the freeholder's written consent, and some leases do not allow it at all. Where an outside vent is not possible, a recirculating hood can be fitted, with a separate extract fan or other ventilation dealing with moisture. Listed buildings may also need listed building consent.

How high should a cooker hood be above the hob?

At least the minimum distance given by the manufacturers. Both the hood and the hob instructions set a minimum gap between them, and where they differ the greater figure should be used. Gas hobs usually need more clearance than induction. A hood fitted too low is a fire risk, while one fitted much higher than recommended captures less steam.

Nearby places we cover

Close to Consett? We cover these nearby towns too: