Fit-only kitchen fitting · Scotland
Fit-only kitchen fitting in Argyll and Bute
Fit-only kitchen fitting in Argyll and Bute starts with a free visit to measure up, then a written scope and quote before any work begins.
Why fit-only kitchen fitting for an Argyll and Bute home?
Some Argyll and Bute households have a kitchen waiting in a spare room after a fitter dropped out, and need the boxes checked and the fit planned again from the start.
If your kitchen is ordered for delivery to your Argyll and Bute home and the retailer does not offer fitting, fit only covers the labour to put it in properly.
What does fit-only kitchen fitting in Argyll and Bute include?
The exact scope is agreed after the survey, but a typical job in Argyll and Bute covers:
- Free survey visit to check your plan, the room and the service positions
- Delivery checked against the plan and delivery note before fitting starts
- Base, wall and tall units positioned, levelled on their legs and fixed to the wall
- Doors and drawer fronts hung and adjusted, with handles drilled and fitted
- Laminate or wood worktops cut, jointed, sealed and fixed down
- End panels, filler panels, plinths, cornice and light rail scribed and fitted
- Sink, tap and appliances connected to the existing water, waste and power points
- Packaging and offcuts cleared, with removal of the old kitchen available as an extra
How much does fit-only kitchen fitting cost in Argyll and Bute?
As a starting point for Argyll and Bute, these ranges include VAT at 20% and allow for typical labour costs in Scotland. Prices in Scotland usually come in below the national guide, as labour rates are lower than in the South East.
| Typical project | Guide price |
|---|---|
| Small kitchen (5–10 units)Labour to fit units, doors, laminate worktops and panels you have bought | £1,400–£2,400 |
| Medium kitchen (10–15 units)As above | £2,400–£3,300 |
| Large kitchen (15+ units, island or tall larders)As above | £3,300–£4,200 |
| Fitter day rateOne fitter; a two-person team is usually £300–£450 per day | £170–£260 per day |
Fit-only prices cover labour for units, doors, panels, plinths and laminate worktops with connections to existing points; stone worktops, new circuits, moved plumbing, gas connections, tiling, flooring and plastering are extra. Prices include VAT at 20%.
Kitchens in homes across Argyll and Bute
You will find Victorian villas, whitewashed cottages, tenement flats and post-war bungalows throughout Argyll and Bute. Victorian villas in Dunoon and Oban often have a separate scullery and a larger kitchen, while cottages and bungalows tend to have a compact room at the back.
Soft water is usual across Argyll and Bute, so limescale is rarely a concern, though rural homes on private supplies may need their own filtering. Long single-track roads are common, and some mainland addresses are quickest reached by ferry, so delivery dates, vehicle size and worktop lengths need planning around timetables and weather.
Villa kitchens are sometimes split between a main room and a former scullery, and joining them is a common project that needs a building warrant if the wall is load-bearing. Rural cottages are often off the gas grid, so cooking may be electric or run from LPG.
Rules for fit-only kitchen fitting in Argyll and Bute
In Scotland, fitting kitchen units you have bought does not need a building warrant, and nor does most electrical work in a house, but the work must still meet the building standards and BS 7671. Ask the electrician for an Electrical Installation Certificate or Minor Works Certificate. Gas hobs and cookers must be connected by a Gas Safe registered engineer, and the kitchen should keep extract ventilation that meets standard 3.14.
Parts of Cowal lie within Loch Lomond and The Trossachs National Park, and listed buildings or conservation areas may need consent for a new external vent.
Before you start
- Measure integrated appliances against the housings on the plan, including ventilation gaps, before buying them separately from the kitchen.
- Do not open or assemble anything before the survey; sealed boxes make it far easier to claim missing or damaged parts from the supplier.
- If you chose stone worktops, the stone supplier templates and fits them after the base units are fixed, usually one to two weeks later.
- Check the order includes filler panels, end panels, plinths, cornice or light rail, and enough legs and plinth clips for every base unit.
- Leave appliance manuals in their boxes; they give the housing sizes and ventilation gaps needed to install each appliance correctly in your Argyll and Bute kitchen.
- Keep using the old kitchen until fitting day if you can, and ask for its removal and disposal to be priced on the same quote.
Questions about fit-only kitchen fitting in Argyll and Bute
How much does fit-only kitchen fitting cost in Argyll and Bute?
Fit-only kitchen fitting in Argyll and Bute typically costs £1,400 to £2,400 including VAT for a small kitchen of 5 to 10 units, based on prices in Scotland. Larger or more involved jobs cost more, and your price is fixed in writing after a free survey visit.
Do you cover the whole of Argyll and Bute?
Yes, across mainland Argyll and Bute, including Dunoon and Oban. We do not currently cover the islands, such as Bute, Mull and Islay. Every job starts with a free survey visit and an itemised written quote.
What does fit-only kitchen fitting not include?
It does not include stone worktops, new electrical circuits, moved plumbing, gas connections, tiling, flooring or plastering. Stone is templated and fitted by the stone supplier or fabricator once the base units are fixed. Fit only covers the labour for units, doors, panels, plinths and laminate worktops, with connections to the points already in place. Any of the extras can be added as separate lines on the same written quote.
Do I need to order anything extra for a fit-only job?
Often, yes. Retail plans regularly leave out filler panels, end panels, plinths, cornice or light rail, legs and plinth clips, worktop joint strips or connector bolts, appliance door-fixing kits and the sink, tap and waste. On the survey we go through your order line by line and list anything missing, so it can be ordered before the fit rather than halting it halfway through.
What happens if parts of my kitchen are missing or damaged?
Missing or damaged parts are the supplier's to replace. We check the delivery against your plan and delivery note before fitting starts and tell you straight away if anything is short, broken or wrong, so you can raise it with the supplier while we re-plan the order of work. Units that do not depend on the missing part can often still go in, and sealed boxes make any claim simpler.
Fit-only kitchen fitting in towns across Argyll and Bute
Choose a town for local guide prices and postcode coverage: