Fit-only kitchen fitting · Scotland
Fit-only kitchen fitting in Renfrewshire and Inverclyde
Our fit-only kitchen fitting work covers the whole of Renfrewshire and Inverclyde, including Paisley, Greenock and Newton Mearns.
Why do people in Renfrewshire and Inverclyde choose fit-only kitchen fitting?
If your kitchen is ordered for delivery to your Renfrewshire and Inverclyde home and the retailer does not offer fitting, fit only covers the labour to put it in properly.
Plenty of homeowners in Renfrewshire and Inverclyde buy a kitchen in a sale or from an online supplier, then look for someone to fit it once the delivery date is booked.
What does fit-only kitchen fitting in Renfrewshire and Inverclyde include?
Here is what usually goes into fit-only kitchen fitting, adjusted to your Renfrewshire and Inverclyde kitchen after we have measured it:
- Free survey visit to check your plan, the room and the service positions
- Delivery checked against the plan and delivery note before fitting starts
- Base, wall and tall units positioned, levelled on their legs and fixed to the wall
- Doors and drawer fronts hung and adjusted, with handles drilled and fitted
- Laminate or wood worktops cut, jointed, sealed and fixed down
- End panels, filler panels, plinths, cornice and light rail scribed and fitted
- Sink, tap and appliances connected to the existing water, waste and power points
- Packaging and offcuts cleared, with removal of the old kitchen available as an extra
How much does fit-only kitchen fitting cost in Renfrewshire and Inverclyde?
Use these ranges to plan your budget. They include VAT, reflect costs in Scotland, and are firmed up once we have seen your Renfrewshire and Inverclyde kitchen. Labour rates in Scotland are generally lower than in London and the South East, so these ranges are a little below the national guide.
| Typical project | Guide price |
|---|---|
| Small kitchen (5–10 units)Labour to fit units, doors, laminate worktops and panels you have bought | £1,400–£2,400 |
| Medium kitchen (10–15 units)As above | £2,400–£3,300 |
| Large kitchen (15+ units, island or tall larders)As above | £3,300–£4,200 |
| Fitter day rateOne fitter; a two-person team is usually £300–£450 per day | £170–£260 per day |
Fit-only prices cover labour for units, doors, panels, plinths and laminate worktops with connections to existing points; stone worktops, new circuits, moved plumbing, gas connections, tiling, flooring and plastering are extra. Prices include VAT at 20%.
Kitchens in homes across Renfrewshire and Inverclyde
The housing mix across Renfrewshire and Inverclyde includes sandstone tenement flats, Victorian villas, four-in-a-block flats and new-build estates, so no two kitchen fits are quite alike. Paisley and Greenock tenement flats often have a kitchen off the hall, while villas and newer homes in Newton Mearns tend to have larger kitchens with island space.
Water in Renfrewshire and Inverclyde is soft, which is kind to taps and appliances and keeps limescale on boiling water taps to a minimum. Steep streets in Greenock, tenement common stairs and four-in-a-block flats with outside stairs can all affect deliveries and worktop handling.
If your home is a tenement flat, the kitchen is often small with a high ceiling, and tall units or a high-level shelf make good use of the height. Villas and newer family homes tend to suit a supply-and-fit kitchen with an island, integrated appliances and a separate utility space.
Rules for fit-only kitchen fitting in Renfrewshire and Inverclyde
In Scotland, fitting kitchen units you have bought does not need a building warrant, and nor does most electrical work in a house, but the work must still meet the building standards and BS 7671. Ask the electrician for an Electrical Installation Certificate or Minor Works Certificate. Gas hobs and cookers must be connected by a Gas Safe registered engineer, and the kitchen should keep extract ventilation that meets standard 3.14.
Paisley and Greenock have conservation areas and listed buildings, so a new external vent may need consent, and tenement owners may need neighbours' agreement.
Before you start
- Check the order includes filler panels, end panels, plinths, cornice or light rail, and enough legs and plinth clips for every base unit.
- Store the boxes flat in a dry, heated room rather than a damp garage, so doors and carcasses do not swell or warp before fitting.
- Do not open or assemble anything before the survey; sealed boxes make it far easier to claim missing or damaged parts from the supplier.
- Worktop joint strips or connector bolts, appliance door-fixing kits and the sink, tap and waste are easy to leave off an order.
- Keep using the old kitchen until fitting day if you can, and ask for its removal and disposal to be priced on the same quote.
- Order handles in the right quantity with one or two spares; doors and drawers cannot be finished without them, and missing handles hold up sign-off.
Questions about fit-only kitchen fitting in Renfrewshire and Inverclyde
How much does fit-only kitchen fitting cost in Renfrewshire and Inverclyde?
Fit-only kitchen fitting in Renfrewshire and Inverclyde typically costs £1,400 to £2,400 including VAT for a small kitchen of 5 to 10 units, based on prices in Scotland. Larger or more involved jobs cost more, and your price is fixed in writing after a free survey visit.
Do you cover the whole of Renfrewshire and Inverclyde?
Yes. We carry out fit-only kitchen fitting across Renfrewshire and Inverclyde, including Paisley, Greenock, Newton Mearns and Renfrew. Every job starts with a free survey visit and an itemised written quote.
Do I need to order anything extra for a fit-only job?
Often, yes. Retail plans regularly leave out filler panels, end panels, plinths, cornice or light rail, legs and plinth clips, worktop joint strips or connector bolts, appliance door-fixing kits and the sink, tap and waste. On the survey we go through your order line by line and list anything missing, so it can be ordered before the fit rather than halting it halfway through.
What does fit-only kitchen fitting not include?
It does not include stone worktops, new electrical circuits, moved plumbing, gas connections, tiling, flooring or plastering. Stone is templated and fitted by the stone supplier or fabricator once the base units are fixed. Fit only covers the labour for units, doors, panels, plinths and laminate worktops, with connections to the points already in place. Any of the extras can be added as separate lines on the same written quote.
Should I unpack my kitchen before the fitter arrives?
No. Leave everything in its packaging until fitting day. Sealed boxes protect doors and panels from knocks and dust, keep small parts with the right unit, and show that any damage happened before delivery. We open and check the boxes against the plan as the fit begins. The one exception is anything your supplier asks you to inspect on delivery, which you should check and report within their deadline.
Fit-only kitchen fitting in towns across Renfrewshire and Inverclyde
Choose a town for local guide prices and postcode coverage:
- Fit-only kitchen fitting in Paisley
- Fit-only kitchen fitting in Greenock
- Fit-only kitchen fitting in Newton Mearns
- Fit-only kitchen fitting in Renfrew
- Fit-only kitchen fitting in Barrhead
- Fit-only kitchen fitting in Johnstone
- Fit-only kitchen fitting in Erskine