Cooker hood installation · England
Cooker hood installation in Warwickshire
Homeowners and landlords across Warwickshire can book us for cooker hood installation: ducted and recirculating cooker hoods fitted, with wall core drilling, ducting and an external grille.
Why cooker hood installation for a Warwickshire home?
If your Warwickshire kitchen has an older open-flued boiler, fitting a stronger hood needs care, as it can affect the flue and should be followed by a spillage test.
A new kitchen in a Warwickshire home can move the hob away from the old vent, so the hood, the duct run and the wall grille all need rethinking together.
What does cooker hood installation in Warwickshire include?
Every kitchen is different, so we confirm the scope in writing. Most jobs of this kind include:
- Survey of the hob position, duct route, outside wall and any open-flued appliance
- Hood fixed at the height set by the hood and hob manufacturers
- Core drilling through the outside wall and an external grille fitted and sealed
- Short, straight runs of rigid ducting wherever the route allows
- Island and ceiling hoods fixed into the ceiling structure by two people
- Recirculating hoods fitted with carbon filters, and their limits explained
- Power supply connected by an electrician and tested to BS 7671
- Spillage test by a Gas Safe registered engineer where an open-flued appliance is present
How much does cooker hood installation cost in Warwickshire?
These guide ranges include VAT at 20% and are adjusted for prices in the West Midlands. We confirm your price in writing after a free survey visit. For the West Midlands, these ranges are close to the national figures.
| Typical project | Guide price |
|---|---|
| Like-for-like cooker hood swapSame position and ducting | £120–£240 |
| New ducted hood through an outside wallCore drilling, ducting run and external grille | £300–£900 |
| Island or ceiling hood installedTwo-person install, fixings to the ceiling structure | £300–£630 |
| Recirculating hood fittedNo ducting; carbon filters need replacing | £120–£300 |
Guide ranges cover fitting and connection with standard ducting through a straightforward wall; long or concealed duct runs, ceiling repairs, new electrical spurs, spillage tests and the hood itself are priced separately. Prices include VAT at 20%.
Kitchens in homes across Warwickshire
You will find Regency townhouses, timber-framed cottages, Victorian terraces and 1930s semis throughout Warwickshire. Victorian terraces in Nuneaton and Rugby often have a narrow back kitchen, while Regency townhouses in Leamington tend to have kitchens in former service rooms or flats.
Water across Warwickshire is mostly hard, so limescale on taps and boiling water taps is common, and a filter or softener can help. Regency townhouses converted to flats may have no lift, and historic town centres can have restricted parking, so delivery needs arranging in advance.
A Regency flat in Leamington may have its kitchen in a former reception room with high ceilings and original features. Terraces and semis elsewhere in the county more often need a straight replacement or a knock-through to the dining room.
Rules for cooker hood installation in Warwickshire
In England, Approved Document F guidance for kitchen extract is about 30 litres per second from a cooker hood extracting outside, or 60 litres per second from a fan elsewhere in the room. A recirculating hood does not remove moisture, so another means of extract is usually needed. A new vent through the outside wall of a flat may need planning permission and the freeholder's consent, and an open-flued gas appliance in the room calls for a spillage test.
Stratford-upon-Avon, Warwick and Leamington Spa have many listed buildings and conservation areas, so new vents or internal changes may need listed building consent or planning permission.
Before you start
- Choose ducted extraction where you can; a recirculating hood filters grease and smells but leaves the moisture from cooking in the room.
- Check the minimum height above the hob in both the hood and hob instructions, and use the greater of the two figures.
- If the kitchen has an open-flued boiler or gas fire, a Gas Safe registered engineer should carry out a spillage test after the hood is fitted.
- In a flat or a listed building, check what consents are needed before any hole is cut through an outside wall.
- Ask for rigid ducting rather than flexible hose wherever the route allows, as it moves more air, gathers less grease and is usually quieter.
- Before choosing a hood for your Warwickshire kitchen, find the nearest outside wall to the hob, because the shorter the duct run, the better the extraction.
Questions about cooker hood installation in Warwickshire
How much does cooker hood installation cost in Warwickshire?
Guide prices in Warwickshire are about £120 to £240 including VAT for a like-for-like cooker hood swap. The final price depends on the size of the kitchen and what is moving, and is set out in an itemised written quote.
Do you cover the whole of Warwickshire?
Yes. We carry out cooker hood installation across Warwickshire, including Nuneaton, Rugby, Leamington Spa and Warwick. Every job starts with a free survey visit and an itemised written quote.
Can a ducted cooker hood be fitted in a flat?
Often, but check consents first. A new vent through the outside wall of a flat may need planning permission and the freeholder's written consent, and some leases do not allow it at all. Where an outside vent is not possible, a recirculating hood can be fitted, with a separate extract fan or other ventilation dealing with moisture. Listed buildings may also need listed building consent.
Does a cooker hood need a hole in the wall?
A ducted hood does. The usual route is a core-drilled hole through the nearest outside wall, with rigid ducting from the hood and an external grille sealed into the wall. Where the hob is far from an outside wall, the duct can sometimes run above the wall units or through a ceiling void. A recirculating hood needs no hole, but it removes no moisture.
Should I choose a ducted or a recirculating cooker hood?
A ducted hood is usually more effective, because it takes steam, smoke and smells outside. A recirculating hood passes air through grease and carbon filters and returns it to the room, so it deals with grease and smells but not moisture, and another means of extract is usually needed. Recirculating suits kitchens with no practical duct route, and its carbon filters need replacing.
Cooker hood installation in towns across Warwickshire
Choose a town for local guide prices and postcode coverage:
- Cooker hood installation in Nuneaton
- Cooker hood installation in Rugby
- Cooker hood installation in Leamington Spa
- Cooker hood installation in Warwick
- Cooker hood installation in Bedworth
- Cooker hood installation in Stratford-upon-Avon
- Cooker hood installation in Kenilworth
- Cooker hood installation in Alcester