Cooker hood installation · Warwickshire
Cooker hood installation in Bedworth
Our cooker hood installation service covers Bedworth and nearby places such as Nuneaton and Coventry, with a free survey visit and an itemised written quote as the first step.

Is cooker hood installation right for your Bedworth kitchen?
If your Bedworth kitchen has an older open-flued boiler, fitting a stronger hood needs care, as it can affect the flue and should be followed by a spillage test.
If your Bedworth house has thick solid walls, core drilling a neat hole for the duct takes the right equipment and careful positioning of the outside grille. Our Warwickshire coverage reaches every part of Bedworth (CV12) and out towards Nuneaton.
What does the job involve?
After the survey visit we write the scope down. For cooker hood installation in Bedworth it usually covers:
- Survey of the hob position, duct route, outside wall and any open-flued appliance
- Hood fixed at the height set by the hood and hob manufacturers
- Recirculating hoods fitted with carbon filters, and their limits explained
- Power supply connected by an electrician and tested to BS 7671
- Island and ceiling hoods fixed into the ceiling structure by two people
- Short, straight runs of rigid ducting wherever the route allows
How much does cooker hood installation cost in Bedworth?
Typical cooker hood installation prices for homes in Bedworth, including VAT and adjusted for the West Midlands. Your own figure depends on the size of the kitchen, the layout and what is moving. Prices across the West Midlands are broadly in line with UK averages.
| Typical project | Guide price |
|---|---|
| Like-for-like cooker hood swapSame position and ducting | £120–£240 |
| New ducted hood through an outside wallCore drilling, ducting run and external grille | £300–£900 |
| Island or ceiling hood installedTwo-person install, fixings to the ceiling structure | £300–£630 |
| Recirculating hood fittedNo ducting; carbon filters need replacing | £120–£300 |
Guide ranges cover fitting and connection with standard ducting through a straightforward wall; long or concealed duct runs, ceiling repairs, new electrical spurs, spillage tests and the hood itself are priced separately. Prices include VAT at 20%.
Fitting kitchens in older and newer Bedworth homes
You will find Regency townhouses, timber-framed cottages, Victorian terraces and 1930s semis throughout Warwickshire. Victorian terraces in Nuneaton and Rugby often have a narrow back kitchen, while Regency townhouses in Leamington tend to have kitchens in former service rooms or flats.
Regency townhouses converted to flats may have no lift, and historic town centres can have restricted parking, so delivery needs arranging in advance. Water across Warwickshire is mostly hard, so limescale on taps and boiling water taps is common, and a filter or softener can help.
Regulations for kitchen work in Bedworth
In England, Approved Document F guidance for kitchen extract is about 30 litres per second from a cooker hood extracting outside, or 60 litres per second from a fan elsewhere in the room. A recirculating hood does not remove moisture, so another means of extract is usually needed. A new vent through the outside wall of a flat may need planning permission and the freeholder's consent, and an open-flued gas appliance in the room calls for a spillage test.
Stratford-upon-Avon, Warwick and Leamington Spa have many listed buildings and conservation areas, so new vents or internal changes may need listed building consent or planning permission.
Tips before you start
- If your Bedworth home is listed, or in a building with strict rules on outside changes, check what is allowed before any hole is cut for a duct.
- Check whether your Bedworth home has an open-flued boiler or gas fire, and mention it at the survey so a spillage test can be planned.
- Ask for rigid ducting rather than flexible hose wherever the route allows, as it moves more air, gathers less grease and is usually quieter.
- Choose ducted extraction where you can; a recirculating hood filters grease and smells but leaves the moisture from cooking in the room.
Questions about cooker hood installation in Bedworth
How much does cooker hood installation cost in Bedworth?
For a like-for-like cooker hood swap, budget around £120 to £240 including VAT in Bedworth. That reflects typical costs in the West Midlands; we confirm the actual figure in writing once we have measured up.
Do you cover all of Bedworth?
Yes. We work across Bedworth, including the CV12 postcode district, and nearby towns such as Nuneaton and Coventry. Book a free survey visit and we will arrange a time that suits you.
Does a cooker hood need a hole in the wall?
A ducted hood does. The usual route is a core-drilled hole through the nearest outside wall, with rigid ducting from the hood and an external grille sealed into the wall. Where the hob is far from an outside wall, the duct can sometimes run above the wall units or through a ceiling void. A recirculating hood needs no hole, but it removes no moisture.
Why might a cooker hood need a spillage test?
Because a hood pulling air out of a room can draw fumes back down the flue of an open-flued gas appliance, such as some older boilers or gas fires. Where the kitchen, or a room open to it, has one, a Gas Safe registered engineer should carry out a spillage test with the hood running at full speed. Room-sealed boilers are not affected in the same way.
Can a ducted cooker hood be fitted in a flat?
Often, but check consents first. A new vent through the outside wall of a flat may need planning permission and the freeholder's written consent, and some leases do not allow it at all. Where an outside vent is not possible, a recirculating hood can be fitted, with a separate extract fan or other ventilation dealing with moisture. Listed buildings may also need listed building consent.
Cooker hood installation in neighbouring towns
The same service is available a short drive from Bedworth, including:
- Cooker hood installation in Nuneaton
- Cooker hood installation in Coventry
- Cooker hood installation in Hinckley
- Cooker hood installation in Earl Shilton
- Cooker hood installation in Kenilworth
- Cooker hood installation in Lutterworth
- Cooker hood installation across Warwickshire
