Cooker hood installation · England
Cooker hood installation in Northamptonshire
If you need cooker hood installation anywhere in Northamptonshire, we survey the kitchen, agree the scope with you and book every trade through to handover.
Is cooker hood installation right for your Northamptonshire kitchen?
Some Northamptonshire households simply want a quieter, more effective hood after years of a noisy one that barely clears the steam above a busy family hob.
Cooks across Northamptonshire who fry, grill or stir-fry often find a recirculating hood leaves smells in the house, and look at ducting the air outside instead.
What does cooker hood installation in Northamptonshire include?
After the survey visit we write the scope down. For cooker hood installation in Northamptonshire it usually covers:
- Survey of the hob position, duct route, outside wall and any open-flued appliance
- Hood fixed at the height set by the hood and hob manufacturers
- Core drilling through the outside wall and an external grille fitted and sealed
- Short, straight runs of rigid ducting wherever the route allows
- Island and ceiling hoods fixed into the ceiling structure by two people
- Recirculating hoods fitted with carbon filters, and their limits explained
- Power supply connected by an electrician and tested to BS 7671
- Spillage test by a Gas Safe registered engineer where an open-flued appliance is present
How much does cooker hood installation cost in Northamptonshire?
As a starting point for Northamptonshire, these ranges include VAT at 20% and allow for typical labour costs in the East Midlands. For the East Midlands, these ranges are close to the national figures.
| Typical project | Guide price |
|---|---|
| Like-for-like cooker hood swapSame position and ducting | £120–£230 |
| New ducted hood through an outside wallCore drilling, ducting run and external grille | £290–£870 |
| Island or ceiling hood installedTwo-person install, fixings to the ceiling structure | £290–£610 |
| Recirculating hood fittedNo ducting; carbon filters need replacing | £120–£290 |
Guide ranges cover fitting and connection with standard ducting through a straightforward wall; long or concealed duct runs, ceiling repairs, new electrical spurs, spillage tests and the hood itself are priced separately. Prices include VAT at 20%.
Kitchens in homes across Northamptonshire
You will find ironstone cottages, Victorian terraces, 1930s semis and post-war new town houses throughout Northamptonshire. Victorian terraces in Northampton and Kettering often have a long galley behind the back room, while post-war houses in Corby tend to have a compact rectangular kitchen.
Water across Northamptonshire is hard, so limescale on taps, sinks and boiling water taps is likely, and a scale-reducing filter is worth considering. Terraced streets with on-street parking can make unloading slow, and village houses on narrow lanes may need a smaller delivery vehicle for long worktops.
Knocking through from a narrow galley to the dining room is a common way to gain space in a terrace. Ironstone village cottages tend to have uneven walls and low ceilings, which shape where tall units and extraction can go.
Rules for cooker hood installation in Northamptonshire
In England, Approved Document F guidance for kitchen extract is about 30 litres per second from a cooker hood extracting outside, or 60 litres per second from a fan elsewhere in the room. A recirculating hood does not remove moisture, so another means of extract is usually needed. A new vent through the outside wall of a flat may need planning permission and the freeholder's consent, and an open-flued gas appliance in the room calls for a spillage test.
Listed ironstone cottages and homes in village conservation areas may need listed building consent or planning permission for new vents or changes to historic fabric.
Before you start
- Choose ducted extraction where you can; a recirculating hood filters grease and smells but leaves the moisture from cooking in the room.
- Check the minimum height above the hob in both the hood and hob instructions, and use the greater of the two figures.
- For an island or ceiling hood, find out what is above the ceiling, as joists or added timbers are needed to carry the weight securely.
- In a flat or a listed building, check what consents are needed before any hole is cut through an outside wall.
- Choose a hood at least as wide as your hob, and compare its stated extraction rate with the size of the room before you buy.
- If you live in a flat in Northamptonshire, ask the freeholder, factor or managing agent about outside vents before you buy a ducted hood.
Questions about cooker hood installation in Northamptonshire
How much does cooker hood installation cost in Northamptonshire?
For a like-for-like cooker hood swap, budget around £120 to £230 including VAT in Northamptonshire. That reflects typical costs in the East Midlands; we confirm the actual figure in writing once we have measured up.
Do you cover the whole of Northamptonshire?
Yes. We carry out cooker hood installation across Northamptonshire, including Northampton, Corby, Kettering and Wellingborough. Every job starts with a free survey visit and an itemised written quote.
How high should a cooker hood be above the hob?
At least the minimum distance given by the manufacturers. Both the hood and the hob instructions set a minimum gap between them, and where they differ the greater figure should be used. Gas hobs usually need more clearance than induction. A hood fitted too low is a fire risk, while one fitted much higher than recommended captures less steam.
Why might a cooker hood need a spillage test?
Because a hood pulling air out of a room can draw fumes back down the flue of an open-flued gas appliance, such as some older boilers or gas fires. Where the kitchen, or a room open to it, has one, a Gas Safe registered engineer should carry out a spillage test with the hood running at full speed. Room-sealed boilers are not affected in the same way.
Should I choose a ducted or a recirculating cooker hood?
A ducted hood is usually more effective, because it takes steam, smoke and smells outside. A recirculating hood passes air through grease and carbon filters and returns it to the room, so it deals with grease and smells but not moisture, and another means of extract is usually needed. Recirculating suits kitchens with no practical duct route, and its carbon filters need replacing.
Cooker hood installation in towns across Northamptonshire
Choose a town for local guide prices and postcode coverage:
- Cooker hood installation in Northampton
- Cooker hood installation in Corby
- Cooker hood installation in Kettering
- Cooker hood installation in Wellingborough
- Cooker hood installation in Rushden
- Cooker hood installation in Daventry
- Cooker hood installation in Brackley
- Cooker hood installation in Towcester
- Cooker hood installation in Oundle