Cooker hood installation · Surrey
Cooker hood installation in Sunbury-on-Thames
Homeowners and landlords in Sunbury-on-Thames can book us for cooker hood installation: ducted and recirculating cooker hoods fitted, with wall core drilling, ducting and an external grille.

Is cooker hood installation right for your Sunbury-on-Thames kitchen?
Homeowners in Sunbury-on-Thames adding a hob to a new island often need a ceiling hood with solid fixings and a duct route planned before the ceiling is closed up.
A new kitchen in a Sunbury-on-Thames home can move the hob away from the old vent, so the hood, the duct run and the wall grille all need rethinking together. Sunbury-on-Thames sits about 8 miles north-east of Woking, and our Surrey coverage takes in everything in between.
What does cooker hood installation in Sunbury-on-Thames include?
Every kitchen is different, so we confirm the scope in writing. Most jobs of this kind include:
- Core drilling through the outside wall and an external grille fitted and sealed
- Recirculating hoods fitted with carbon filters, and their limits explained
- Power supply connected by an electrician and tested to BS 7671
- Spillage test by a Gas Safe registered engineer where an open-flued appliance is present
- Island and ceiling hoods fixed into the ceiling structure by two people
- Hood fixed at the height set by the hood and hob manufacturers
Cooker hood installation prices in Sunbury-on-Thames
Typical cooker hood installation prices for homes in Sunbury-on-Thames, including VAT and adjusted for the South East. Your own figure depends on the size of the kitchen, the layout and what is moving. Labour in the South East generally costs more than the UK average, which lifts these ranges a little.
| Typical project | Guide price |
|---|---|
| Like-for-like cooker hood swapSame position and ducting | £140–£280 |
| New ducted hood through an outside wallCore drilling, ducting run and external grille | £340–£1,000 |
| Island or ceiling hood installedTwo-person install, fixings to the ceiling structure | £340–£720 |
| Recirculating hood fittedNo ducting; carbon filters need replacing | £140–£340 |
Guide ranges cover fitting and connection with standard ducting through a straightforward wall; long or concealed duct runs, ceiling repairs, new electrical spurs, spillage tests and the hood itself are priced separately. Prices include VAT at 20%.
House types around Sunbury-on-Thames and what they mean for a kitchen
Across Surrey you will often find 1930s semis, Victorian and Edwardian villas, detached family houses and new-build estates, and each shapes the kitchen differently. 1930s semis often have a narrow kitchen beside the dining room, while larger detached houses and Edwardian villas may have room for an island or a separate utility.
Surrey's water is hard across most of the county, so limescale on taps and boiling water taps is common, and a scale-reducing filter is worth considering. Private roads, long drives and village lanes can be awkward for large lorries, while town-centre flats may need lift bookings and parking permits for delivery day.
Building regulations, electrics and gas in Sunbury-on-Thames
In England, Approved Document F guidance for kitchen extract is about 30 litres per second from a cooker hood extracting outside, or 60 litres per second from a fan elsewhere in the room. A recirculating hood does not remove moisture, so another means of extract is usually needed. A new vent through the outside wall of a flat may need planning permission and the freeholder's consent, and an open-flued gas appliance in the room calls for a spillage test.
Listed buildings and conservation areas in older towns and villages may need consent for new vents, and flats in managed blocks usually need the freeholder's consent first.
Tips before you start
- Ask for rigid ducting rather than flexible hose wherever the route allows, as it moves more air, gathers less grease and is usually quieter.
- If your Sunbury-on-Thames home is listed, or in a building with strict rules on outside changes, check what is allowed before any hole is cut for a duct.
- Before choosing a hood for your Sunbury-on-Thames kitchen, find the nearest outside wall to the hob, because the shorter the duct run, the better the extraction.
- For an island or ceiling hood, find out what is above the ceiling, as joists or added timbers are needed to carry the weight securely.
Questions about cooker hood installation in Sunbury-on-Thames
How much does cooker hood installation cost in Sunbury-on-Thames?
Cooker hood installation in Sunbury-on-Thames typically costs £140 to £280 including VAT for a like-for-like cooker hood swap, based on prices in the South East. Larger or more involved jobs cost more, and your price is fixed in writing after a free survey visit.
Do you work near Sunbury-on-Thames as well?
Yes. As well as Sunbury-on-Thames itself, we cover the rest of Surrey and nearby towns such as Walton-on-Thames and West Molesey. The process is the same wherever the kitchen is.
Does a cooker hood need a hole in the wall?
A ducted hood does. The usual route is a core-drilled hole through the nearest outside wall, with rigid ducting from the hood and an external grille sealed into the wall. Where the hob is far from an outside wall, the duct can sometimes run above the wall units or through a ceiling void. A recirculating hood needs no hole, but it removes no moisture.
Can a ducted cooker hood be fitted in a flat?
Often, but check consents first. A new vent through the outside wall of a flat may need planning permission and the freeholder's written consent, and some leases do not allow it at all. Where an outside vent is not possible, a recirculating hood can be fitted, with a separate extract fan or other ventilation dealing with moisture. Listed buildings may also need listed building consent.
Should I choose a ducted or a recirculating cooker hood?
A ducted hood is usually more effective, because it takes steam, smoke and smells outside. A recirculating hood passes air through grease and carbon filters and returns it to the room, so it deals with grease and smells but not moisture, and another means of extract is usually needed. Recirculating suits kitchens with no practical duct route, and its carbon filters need replacing.
Cooker hood installation near Sunbury-on-Thames
We also carry out cooker hood installation in these towns near Sunbury-on-Thames:
- Cooker hood installation in Walton-on-Thames
- Cooker hood installation in West Molesey
- Cooker hood installation in Hampton
- Cooker hood installation in Hanworth
- Cooker hood installation in Ashford, Surrey
- Cooker hood installation in Weybridge
- Cooker hood installation across Surrey
More services for Sunbury-on-Thames kitchens
- Splashbacks and tiling in Sunbury-on-Thames
- Kitchen island installation in Sunbury-on-Thames
- Kitchen refurbishment in Sunbury-on-Thames
- Kitchen design and planning in Sunbury-on-Thames
- Kitchen strip-out and removal in Sunbury-on-Thames
- Supply and fit kitchens in Sunbury-on-Thames
- All kitchen services in Sunbury-on-Thames
