Cooker hood installation in Ashford, Surrey

When does cooker hood installation make sense in Ashford, Surrey?

If your Ashford, Surrey house has thick solid walls, core drilling a neat hole for the duct takes the right equipment and careful positioning of the outside grille.

Cooks across Surrey who fry, grill or stir-fry often find a recirculating hood leaves smells in the house, and look at ducting the air outside instead. Homes right across Ashford, Surrey are covered, as are nearby places such as Staines, Feltham and the villages in between.

What does the job involve?

After the survey visit we write the scope down. For cooker hood installation in Ashford, Surrey it usually covers:

Short, straight runs of rigid ducting wherever the route allows
Spillage test by a Gas Safe registered engineer where an open-flued appliance is present
Recirculating hoods fitted with carbon filters, and their limits explained
Island and ceiling hoods fixed into the ceiling structure by two people
Power supply connected by an electrician and tested to BS 7671
Core drilling through the outside wall and an external grille fitted and sealed

What does cooker hood installation cost in Ashford, Surrey?

The figures below are guide prices for Ashford, Surrey, including VAT and adjusted for typical costs across the South East. The fixed price comes after we have measured up. Prices in the South East usually run above the national guide, mainly because labour and parking cost more.

What does cooker hood installation cost in Ashford, Surrey?
Typical project	Guide price
Like-for-like cooker hood swapSame position and ducting	£140–£280
New ducted hood through an outside wallCore drilling, ducting run and external grille	£340–£1,000
Island or ceiling hood installedTwo-person install, fixings to the ceiling structure	£340–£720
Recirculating hood fittedNo ducting; carbon filters need replacing	£140–£340

Guide ranges cover fitting and connection with standard ducting through a straightforward wall; long or concealed duct runs, ceiling repairs, new electrical spurs, spillage tests and the hood itself are priced separately. Prices include VAT at 20%.

What kind of kitchens do we fit in Ashford, Surrey?

The housing mix across Surrey includes 1930s semis, Victorian and Edwardian villas, detached family houses and new-build estates, so no two kitchen fits are quite alike. 1930s semis often have a narrow kitchen beside the dining room, while larger detached houses and Edwardian villas may have room for an island or a separate utility.

Private roads, long drives and village lanes can be awkward for large lorries, while town-centre flats may need lift bookings and parking permits for delivery day. Surrey's water is hard across most of the county, so limescale on taps and boiling water taps is common, and a scale-reducing filter is worth considering.

Building regulations, electrics and gas in Ashford, Surrey

In England, Approved Document F guidance for kitchen extract is about 30 litres per second from a cooker hood extracting outside, or 60 litres per second from a fan elsewhere in the room. A recirculating hood does not remove moisture, so another means of extract is usually needed. A new vent through the outside wall of a flat may need planning permission and the freeholder's consent, and an open-flued gas appliance in the room calls for a spillage test.

Listed buildings and conservation areas in older towns and villages may need consent for new vents, and flats in managed blocks usually need the freeholder's consent first.

Practical advice for Ashford, Surrey homeowners

Check whether your Ashford, Surrey home has an open-flued boiler or gas fire, and mention it at the survey so a spillage test can be planned.
If you live in a flat in Surrey, ask the freeholder, factor or managing agent about outside vents before you buy a ducted hood.
Replace the carbon filters in a recirculating hood as often as the manufacturer advises, and clean the grease filters regularly so the hood keeps working well.
For an island or ceiling hood, find out what is above the ceiling, as joists or added timbers are needed to carry the weight securely.

Questions about cooker hood installation in Ashford, Surrey

How much does cooker hood installation cost in Ashford, Surrey?

Guide prices in Ashford, Surrey are about £140 to £280 including VAT for a like-for-like cooker hood swap. The final price depends on the size of the kitchen and what is moving, and is set out in an itemised written quote.

Do you cover all of Ashford, Surrey?

Yes. We work across Ashford, Surrey, including the TW15 postcode district, and nearby towns such as Staines and Feltham. Book a free survey visit and we will arrange a time that suits you.

How high should a cooker hood be above the hob?

At least the minimum distance given by the manufacturers. Both the hood and the hob instructions set a minimum gap between them, and where they differ the greater figure should be used. Gas hobs usually need more clearance than induction. A hood fitted too low is a fire risk, while one fitted much higher than recommended captures less steam.

Does a cooker hood need a hole in the wall?

A ducted hood does. The usual route is a core-drilled hole through the nearest outside wall, with rigid ducting from the hood and an external grille sealed into the wall. Where the hob is far from an outside wall, the duct can sometimes run above the wall units or through a ceiling void. A recirculating hood needs no hole, but it removes no moisture.

Can a ducted cooker hood be fitted in a flat?

Often, but check consents first. A new vent through the outside wall of a flat may need planning permission and the freeholder's written consent, and some leases do not allow it at all. Where an outside vent is not possible, a recirculating hood can be fitted, with a separate extract fan or other ventilation dealing with moisture. Listed buildings may also need listed building consent.

Nearby places we cover

We also carry out cooker hood installation in these towns near Ashford, Surrey: