Cooker hood installation · Scotland
Cooker hood installation in the Scottish Borders
Cooker hood installation in the Scottish Borders starts with a free visit to measure up, then a written scope and quote before any work begins.
Is cooker hood installation right for your Scottish Borders kitchen?
Some Scottish Borders households simply want a quieter, more effective hood after years of a noisy one that barely clears the steam above a busy family hob.
Cooks across the Scottish Borders who fry, grill or stir-fry often find a recirculating hood leaves smells in the house, and look at ducting the air outside instead.
What does cooker hood installation in the Scottish Borders include?
After the survey visit we write the scope down. For cooker hood installation in the Scottish Borders it usually covers:
- Survey of the hob position, duct route, outside wall and any open-flued appliance
- Hood fixed at the height set by the hood and hob manufacturers
- Core drilling through the outside wall and an external grille fitted and sealed
- Short, straight runs of rigid ducting wherever the route allows
- Island and ceiling hoods fixed into the ceiling structure by two people
- Recirculating hoods fitted with carbon filters, and their limits explained
- Power supply connected by an electrician and tested to BS 7671
- Spillage test by a Gas Safe registered engineer where an open-flued appliance is present
How much does cooker hood installation cost in the Scottish Borders?
Use these ranges to plan your budget. They include VAT, reflect costs in Scotland, and are firmed up once we have seen your Scottish Borders kitchen. Prices in Scotland usually come in below the national guide, as labour rates are lower than in the South East.
| Typical project | Guide price |
|---|---|
| Like-for-like cooker hood swapSame position and ducting | £110–£230 |
| New ducted hood through an outside wallCore drilling, ducting run and external grille | £280–£850 |
| Island or ceiling hood installedTwo-person install, fixings to the ceiling structure | £280–£590 |
| Recirculating hood fittedNo ducting; carbon filters need replacing | £110–£280 |
Guide ranges cover fitting and connection with standard ducting through a straightforward wall; long or concealed duct runs, ceiling repairs, new electrical spurs, spillage tests and the hood itself are priced separately. Prices include VAT at 20%.
Kitchens in homes across the Scottish Borders
Across the Scottish Borders you will often find stone mill-town terraces, Victorian villas, farm cottages and post-war council-built houses, and each shapes the kitchen differently. Stone terraces in Hawick and Galashiels often have a small kitchen at the back, while Victorian villas in Peebles and Kelso tend to have larger separate kitchens.
The Scottish Borders generally have soft mains water, though rural homes on private supplies may need testing and filtering. Rural roads and farm tracks can be narrow for delivery lorries, and older town centres may have limited parking, so delivery is planned in advance.
Stone terraces in the mill towns usually have small rooms and thick walls that suit a galley or L-shaped layout. Farm cottages are often off the gas grid, so cooking may be planned around induction, LPG or an oil-fired range.
Rules for cooker hood installation in the Scottish Borders
In Scotland, standard 3.14 of the domestic Technical Handbook expects kitchens to have extract ventilation, and a recirculating hood alone does not remove moisture. Fitting an extractor fan or a ducted hood does not normally need a building warrant. In a flat, a new vent through a shared outside wall may need the other owners' agreement and planning permission, and a listed building may need listed building consent. Where the room has an open-flued gas appliance, a Gas Safe registered engineer should carry out a spillage test after the hood is fitted.
Older Borders towns often have conservation areas and listed buildings, so a new external vent or changes to historic features may need consent.
Before you start
- For an island or ceiling hood, find out what is above the ceiling, as joists or added timbers are needed to carry the weight securely.
- In a flat or a listed building, check what consents are needed before any hole is cut through an outside wall.
- If the kitchen has an open-flued boiler or gas fire, a Gas Safe registered engineer should carry out a spillage test after the hood is fitted.
- Check the minimum height above the hob in both the hood and hob instructions, and use the greater of the two figures.
- Choose a hood at least as wide as your hob, and compare its stated extraction rate with the size of the room before you buy.
- If your Scottish Borders home is listed, or in a building with strict rules on outside changes, check what is allowed before any hole is cut for a duct.
Questions about cooker hood installation in the Scottish Borders
How much does cooker hood installation cost in the Scottish Borders?
Guide prices in the Scottish Borders are about £110 to £230 including VAT for a like-for-like cooker hood swap. The final price depends on the size of the kitchen and what is moving, and is set out in an itemised written quote.
Do you cover the whole of the Scottish Borders?
Yes. We carry out cooker hood installation across the Scottish Borders, including Hawick, Galashiels, Peebles and Kelso. Every job starts with a free survey visit and an itemised written quote.
Should I choose a ducted or a recirculating cooker hood?
A ducted hood is usually more effective, because it takes steam, smoke and smells outside. A recirculating hood passes air through grease and carbon filters and returns it to the room, so it deals with grease and smells but not moisture, and another means of extract is usually needed. Recirculating suits kitchens with no practical duct route, and its carbon filters need replacing.
How high should a cooker hood be above the hob?
At least the minimum distance given by the manufacturers. Both the hood and the hob instructions set a minimum gap between them, and where they differ the greater figure should be used. Gas hobs usually need more clearance than induction. A hood fitted too low is a fire risk, while one fitted much higher than recommended captures less steam.
Does a cooker hood need a hole in the wall?
A ducted hood does. The usual route is a core-drilled hole through the nearest outside wall, with rigid ducting from the hood and an external grille sealed into the wall. Where the hob is far from an outside wall, the duct can sometimes run above the wall units or through a ceiling void. A recirculating hood needs no hole, but it removes no moisture.
Cooker hood installation in towns across the Scottish Borders
Choose a town for local guide prices and postcode coverage:
- Cooker hood installation in Hawick
- Cooker hood installation in Galashiels
- Cooker hood installation in Peebles
- Cooker hood installation in Kelso