Cooker hood installation · Scotland
Cooker hood installation in Lanarkshire
If you need cooker hood installation anywhere in Lanarkshire, we survey the kitchen, agree the scope with you and book every trade through to handover.
Why do people in Lanarkshire choose cooker hood installation?
Homeowners in Lanarkshire adding a hob to a new island often need a ceiling hood with solid fixings and a duct route planned before the ceiling is closed up.
Cooks across Lanarkshire who fry, grill or stir-fry often find a recirculating hood leaves smells in the house, and look at ducting the air outside instead.
What does cooker hood installation in Lanarkshire include?
The exact scope is agreed after the survey, but a typical job in Lanarkshire covers:
- Survey of the hob position, duct route, outside wall and any open-flued appliance
- Hood fixed at the height set by the hood and hob manufacturers
- Core drilling through the outside wall and an external grille fitted and sealed
- Short, straight runs of rigid ducting wherever the route allows
- Island and ceiling hoods fixed into the ceiling structure by two people
- Recirculating hoods fitted with carbon filters, and their limits explained
- Power supply connected by an electrician and tested to BS 7671
- Spillage test by a Gas Safe registered engineer where an open-flued appliance is present
How much does cooker hood installation cost in Lanarkshire?
Typical cooker hood installation prices for homes in Lanarkshire, including VAT and adjusted for Scotland. Your own figure depends on the size of the kitchen, the layout and what is moving. Costs across Scotland tend to sit under UK averages, which these ranges reflect.
| Typical project | Guide price |
|---|---|
| Like-for-like cooker hood swapSame position and ducting | £110–£230 |
| New ducted hood through an outside wallCore drilling, ducting run and external grille | £280–£850 |
| Island or ceiling hood installedTwo-person install, fixings to the ceiling structure | £280–£590 |
| Recirculating hood fittedNo ducting; carbon filters need replacing | £110–£280 |
Guide ranges cover fitting and connection with standard ducting through a straightforward wall; long or concealed duct runs, ceiling repairs, new electrical spurs, spillage tests and the hood itself are priced separately. Prices include VAT at 20%.
Kitchens in homes across Lanarkshire
The housing mix across Lanarkshire includes sandstone tenement flats, four-in-a-block flats, new town houses and interwar council-built semis, so no two kitchen fits are quite alike. New-town houses in East Kilbride and Cumbernauld often have a compact galley, while tenement and four-in-a-block flats tend to have a small kitchen off the hall or at the back.
Lanarkshire's mains water is soft, so limescale is rarely an issue and taps, sinks and boiling water taps tend to stay cleaner. Common stairs in tenements and upper four-in-a-block flats mean units are carried by hand, while new-town estates may have parking courts some distance from the door.
Removing a partition between the kitchen and dining area is a common new-town project, subject to a building warrant if the wall is load-bearing. Ex-council semis often need a full strip-out with new wiring, more sockets and a layout that makes better use of the space by the back door.
Rules for cooker hood installation in Lanarkshire
In Scotland, standard 3.14 of the domestic Technical Handbook expects kitchens to have extract ventilation, and a recirculating hood alone does not remove moisture. Fitting an extractor fan or a ducted hood does not normally need a building warrant. In a flat, a new vent through a shared outside wall may need the other owners' agreement and planning permission, and a listed building may need listed building consent. Where the room has an open-flued gas appliance, a Gas Safe registered engineer should carry out a spillage test after the hood is fitted.
The New Lanark World Heritage Site, other listed buildings and conservation areas may need consent for new vents, and flat owners may need neighbours' agreement.
Before you start
- Choose ducted extraction where you can; a recirculating hood filters grease and smells but leaves the moisture from cooking in the room.
- Keep the duct run short and straight with rigid ducting, because every bend and extra metre of flexible hose reduces how much air the hood moves.
- For an island or ceiling hood, find out what is above the ceiling, as joists or added timbers are needed to carry the weight securely.
- Check the minimum height above the hob in both the hood and hob instructions, and use the greater of the two figures.
- Ask for rigid ducting rather than flexible hose wherever the route allows, as it moves more air, gathers less grease and is usually quieter.
- If your Lanarkshire home is listed, or in a building with strict rules on outside changes, check what is allowed before any hole is cut for a duct.
Questions about cooker hood installation in Lanarkshire
How much does cooker hood installation cost in Lanarkshire?
Cooker hood installation in Lanarkshire typically costs £110 to £230 including VAT for a like-for-like cooker hood swap, based on prices in Scotland. Larger or more involved jobs cost more, and your price is fixed in writing after a free survey visit.
Do you cover the whole of Lanarkshire?
Yes. We carry out cooker hood installation across Lanarkshire, including East Kilbride, Hamilton, Cumbernauld and Coatbridge. Every job starts with a free survey visit and an itemised written quote.
Should I choose a ducted or a recirculating cooker hood?
A ducted hood is usually more effective, because it takes steam, smoke and smells outside. A recirculating hood passes air through grease and carbon filters and returns it to the room, so it deals with grease and smells but not moisture, and another means of extract is usually needed. Recirculating suits kitchens with no practical duct route, and its carbon filters need replacing.
Why might a cooker hood need a spillage test?
Because a hood pulling air out of a room can draw fumes back down the flue of an open-flued gas appliance, such as some older boilers or gas fires. Where the kitchen, or a room open to it, has one, a Gas Safe registered engineer should carry out a spillage test with the hood running at full speed. Room-sealed boilers are not affected in the same way.
Does a cooker hood need a hole in the wall?
A ducted hood does. The usual route is a core-drilled hole through the nearest outside wall, with rigid ducting from the hood and an external grille sealed into the wall. Where the hob is far from an outside wall, the duct can sometimes run above the wall units or through a ceiling void. A recirculating hood needs no hole, but it removes no moisture.
Cooker hood installation in towns across Lanarkshire
Choose a town for local guide prices and postcode coverage:
- Cooker hood installation in East Kilbride
- Cooker hood installation in Hamilton
- Cooker hood installation in Cumbernauld
- Cooker hood installation in Coatbridge
- Cooker hood installation in Airdrie
- Cooker hood installation in Motherwell
- Cooker hood installation in Rutherglen
- Cooker hood installation in Cambuslang
- Cooker hood installation in Wishaw
- Cooker hood installation in Bellshill
- Cooker hood installation in Blantyre
- Cooker hood installation in Viewpark
- Cooker hood installation in Larkhall