Cooker hood installation in Nottingham

Who usually needs cooker hood installation in Nottingham?

Cooks across Nottinghamshire who fry, grill or stir-fry often find a recirculating hood leaves smells in the house, and look at ducting the air outside instead.

Some Nottingham households simply want a quieter, more effective hood after years of a noisy one that barely clears the steam above a busy family hob. Kitchens in every part of Nottingham are covered, and the survey visit is free wherever you are in Nottinghamshire.

What we cover for cooker hood installation in Nottingham

Every kitchen is different, so we confirm the scope in writing. Most jobs of this kind include:

Survey of the hob position, duct route, outside wall and any open-flued appliance
Recirculating hoods fitted with carbon filters, and their limits explained
Power supply connected by an electrician and tested to BS 7671
Short, straight runs of rigid ducting wherever the route allows
Hood fixed at the height set by the hood and hob manufacturers
Core drilling through the outside wall and an external grille fitted and sealed

Cooker hood installation prices in Nottingham

Use these ranges to plan your budget. They include VAT, reflect costs in the East Midlands, and are firmed up once we have seen your Nottingham kitchen. Prices across the East Midlands are broadly in line with UK averages.

Cooker hood installation prices in Nottingham
Typical project	Guide price
Like-for-like cooker hood swapSame position and ducting	£120–£230
New ducted hood through an outside wallCore drilling, ducting run and external grille	£290–£870
Island or ceiling hood installedTwo-person install, fixings to the ceiling structure	£290–£610
Recirculating hood fittedNo ducting; carbon filters need replacing	£120–£290

Guide ranges cover fitting and connection with standard ducting through a straightforward wall; long or concealed duct runs, ceiling repairs, new electrical spurs, spillage tests and the hood itself are priced separately. Prices include VAT at 20%.

House types around Nottingham and what they mean for a kitchen

Typical homes in this part of Nottinghamshire include Victorian terraces, 1930s semis, former mining village houses and new-build estates. In Nottingham, Victorian terraces often have a narrow back kitchen, while 1930s semis and ex-council houses tend to have a compact rectangular kitchen at the rear.

Expect hard water across most of Nottinghamshire, so limescale on taps and boiling water taps is common, and an inline filter or softener can help. Inner-city terraces with permit parking and no rear access can make deliveries slow, and long worktops may have to come through a narrow hallway.

Regulations for kitchen work in Nottingham

In England, Approved Document F guidance for kitchen extract is about 30 litres per second from a cooker hood extracting outside, or 60 litres per second from a fan elsewhere in the room. A recirculating hood does not remove moisture, so another means of extract is usually needed. A new vent through the outside wall of a flat may need planning permission and the freeholder's consent, and an open-flued gas appliance in the room calls for a spillage test.

Where a home is listed or in a conservation area, such as parts of Nottingham and Newark, a new external vent or changes to historic features may need consent.

Tips before you start

Check whether your Nottingham home has an open-flued boiler or gas fire, and mention it at the survey so a spillage test can be planned.
Choose a hood at least as wide as your hob, and compare its stated extraction rate with the size of the room before you buy.
Before choosing a hood for your Nottingham kitchen, find the nearest outside wall to the hob, because the shorter the duct run, the better the extraction.
Check the minimum height above the hob in both the hood and hob instructions, and use the greater of the two figures.

Questions about cooker hood installation in Nottingham

How much does cooker hood installation cost in Nottingham?

Guide prices in Nottingham are about £120 to £230 including VAT for a like-for-like cooker hood swap. The final price depends on the size of the kitchen and what is moving, and is set out in an itemised written quote.

Do you cover all of Nottingham?

Yes. We work across Nottingham, including the NG1, NG3 and NG7 postcode districts, and nearby towns such as West Bridgford and Arnold. Book a free survey visit and we will arrange a time that suits you.

Does a cooker hood need a hole in the wall?

A ducted hood does. The usual route is a core-drilled hole through the nearest outside wall, with rigid ducting from the hood and an external grille sealed into the wall. Where the hob is far from an outside wall, the duct can sometimes run above the wall units or through a ceiling void. A recirculating hood needs no hole, but it removes no moisture.

Why might a cooker hood need a spillage test?

Because a hood pulling air out of a room can draw fumes back down the flue of an open-flued gas appliance, such as some older boilers or gas fires. Where the kitchen, or a room open to it, has one, a Gas Safe registered engineer should carry out a spillage test with the hood running at full speed. Room-sealed boilers are not affected in the same way.

Can a ducted cooker hood be fitted in a flat?

Often, but check consents first. A new vent through the outside wall of a flat may need planning permission and the freeholder's written consent, and some leases do not allow it at all. Where an outside vent is not possible, a recirculating hood can be fitted, with a separate extract fan or other ventilation dealing with moisture. Listed buildings may also need listed building consent.

Nearby places we cover

We also carry out cooker hood installation in these towns near Nottingham: