Utility room fitting in Nottingham

Thinking about utility room fitting in Nottingham?

In a Nottingham house where the garage is already used for storage rather than the car, some people fit a run of units and the laundry along one wall.

Larger households in Nottingham sharing a lot of laundry often want a stacked washer and dryer, a hanging rail and a clear worktop for folding. We cover all of Nottingham, including the NG1, NG3 and NG7 postcode districts, and travel out to neighbouring towns across Nottinghamshire.

What does utility room fitting in Nottingham include?

Here is what usually goes into utility room fitting, adjusted to your Nottingham kitchen after we have measured it:

A vent to outside for a vented dryer, or a drain hose for condenser models
Free survey visit to check water, waste, power and outside wall positions
Washing machine supply, waste and isolation valve, tested for leaks
Utility sink and tap plumbed in, with new supplies and waste where none exist
Stacking kit fitted where the washer and dryer sit one above the other
Base, wall and tall units fitted, levelled and fixed to the wall

What should you budget for utility room fitting in Nottingham?

Use these ranges to plan your budget. They include VAT, reflect costs in the East Midlands, and are firmed up once we have seen your Nottingham kitchen. Costs in the East Midlands sit close to the national guide.

What should you budget for utility room fitting in Nottingham?
Typical project	Guide price
Utility units and worktop fitted (fit only)Three to six units, laminate worktop, panels	£1,200–£2,900
Utility room supplied and fittedUnits, worktop, sink, washer and dryer connections	£2,900–£6,800
New utility plumbing for a sink and washing machineSupplies, waste and valves where none exist	£390–£970

Fit-only and supply-and-fit ranges cover units, worktop and standard sink and appliance connections, with new plumbing where none exists as a separate line; extract fans, dryer vents and new circuits are quoted on top. Prices include VAT at 20%.

What kind of kitchens do we fit in Nottingham?

The housing mix across Nottinghamshire includes Victorian terraces, 1930s semis, former mining village houses and new-build estates, so no two kitchen fits are quite alike. In Nottingham, Victorian terraces often have a narrow back kitchen, while 1930s semis and ex-council houses tend to have a compact rectangular kitchen at the rear.

Expect hard water across most of Nottinghamshire, so limescale on taps and boiling water taps is common, and an inline filter or softener can help. Inner-city terraces with permit parking and no rear access can make deliveries slow, and long worktops may have to come through a narrow hallway.

Do you need approval for utility room fitting in Nottingham?

Fitting a utility room needs no planning permission in England, though a new dryer vent through the outside wall of a flat may need planning permission and the freeholder's consent. Adding sockets to an existing circuit is not notifiable, but a new circuit is, under Part P. Approved Document F sets an extract rate of about 30 litres per second for a utility room, so a new fan should be sized to meet it, and if an open-flued boiler shares the room, a Gas Safe registered engineer should carry out a spillage test once a fan is fitted.

Where a home is listed or in a conservation area, such as parts of Nottingham and Newark, a new external vent or changes to historic features may need consent.

Before you book utility room fitting in Nottingham

Measure the washer and dryer heights, including any stacking kit, before ordering wall units or shelves to go above them.
Plan the sockets in your Nottingham utility so each appliance can be switched off at an accessible switch without moving the machine.
Ask for an isolation valve on the washing machine supply that can be reached without pulling the machine out from under the worktop.
Check which dryer you have: a vented dryer needs a duct to an outside wall, while condenser and heat pump dryers need emptying or a drain.

Questions about utility room fitting in Nottingham

How much does utility room fitting cost in Nottingham?

Utility room fitting in Nottingham typically costs £1,200 to £2,900 including VAT for fitting three to six utility units and a worktop you have bought, based on prices in the East Midlands. Larger or more involved jobs cost more, and your price is fixed in writing after a free survey visit.

Do you cover all of Nottingham?

Yes. We work across Nottingham, including the NG1, NG3 and NG7 postcode districts, and nearby towns such as West Bridgford and Arnold. Book a free survey visit and we will arrange a time that suits you.

Can a utility room go in a garage or under the stairs?

Often, yes, as long as the space already exists and is usable. In a garage it needs to be dry and protected from frost, with power and a route for water and waste. Under the stairs, check the headroom, the ventilation and whether a door can open fully. We fit units and connect appliances in existing spaces; converting a garage into a habitable room is a separate building project.

Does a condenser or heat pump dryer need an outside vent?

No. Condenser and heat pump dryers do not need an outside vent, so they can go where a vented dryer cannot. They collect water in a container that has to be emptied, or they can be connected to the waste so they drain automatically, which is easy when the dryer sits beside the washing machine. They still give off some warmth, so the space needs air around it. A vented dryer needs a duct to an outside wall.

Can a worktop go over a washing machine and dryer?

Yes, and it is one of the most common utility layouts. The worktop is supported by units, end panels or a rail at each side rather than resting on the machines, with a small gap above them for vibration and so they can be slid out for servicing. Standard front-loading machines usually fit under a standard-height worktop, but we check the appliance heights against the plan first.

Also covering nearby towns

The same service is available a short drive from Nottingham, including: