Cooker hood installation in Northampton

Why do people in Northampton choose cooker hood installation?

Some Northampton households simply want a quieter, more effective hood after years of a noisy one that barely clears the steam above a busy family hob.

Cooks across Northamptonshire who fry, grill or stir-fry often find a recirculating hood leaves smells in the house, and look at ducting the air outside instead. We work throughout Northampton (NN1) and across the wider Northamptonshire area.

What is included in the work?

Here is what usually goes into cooker hood installation, adjusted to your Northampton kitchen after we have measured it:

Short, straight runs of rigid ducting wherever the route allows
Survey of the hob position, duct route, outside wall and any open-flued appliance
Island and ceiling hoods fixed into the ceiling structure by two people
Core drilling through the outside wall and an external grille fitted and sealed
Hood fixed at the height set by the hood and hob manufacturers
Spillage test by a Gas Safe registered engineer where an open-flued appliance is present

What does cooker hood installation cost in Northampton?

Typical cooker hood installation prices for homes in Northampton, including VAT and adjusted for the East Midlands. Your own figure depends on the size of the kitchen, the layout and what is moving. For the East Midlands, these ranges are close to the national figures.

What does cooker hood installation cost in Northampton?
Typical project	Guide price
Like-for-like cooker hood swapSame position and ducting	£120–£230
New ducted hood through an outside wallCore drilling, ducting run and external grille	£290–£870
Island or ceiling hood installedTwo-person install, fixings to the ceiling structure	£290–£610
Recirculating hood fittedNo ducting; carbon filters need replacing	£120–£290

Guide ranges cover fitting and connection with standard ducting through a straightforward wall; long or concealed duct runs, ceiling repairs, new electrical spurs, spillage tests and the hood itself are priced separately. Prices include VAT at 20%.

Fitting kitchens in older and newer Northampton homes

The housing mix across Northamptonshire includes ironstone cottages, Victorian terraces, 1930s semis and post-war new town houses, so no two kitchen fits are quite alike. Victorian terraces in Northampton and Kettering often have a long galley behind the back room, while post-war houses in Corby tend to have a compact rectangular kitchen.

Water across Northamptonshire is hard, so limescale on taps, sinks and boiling water taps is likely, and a scale-reducing filter is worth considering. Terraced streets with on-street parking can make unloading slow, and village houses on narrow lanes may need a smaller delivery vehicle for long worktops.

What rules apply to cooker hood installation in Northampton?

In England, Approved Document F guidance for kitchen extract is about 30 litres per second from a cooker hood extracting outside, or 60 litres per second from a fan elsewhere in the room. A recirculating hood does not remove moisture, so another means of extract is usually needed. A new vent through the outside wall of a flat may need planning permission and the freeholder's consent, and an open-flued gas appliance in the room calls for a spillage test.

Listed ironstone cottages and homes in village conservation areas may need listed building consent or planning permission for new vents or changes to historic fabric.

Planning ahead

If your Northampton home is listed, or in a building with strict rules on outside changes, check what is allowed before any hole is cut for a duct.
Ask for rigid ducting rather than flexible hose wherever the route allows, as it moves more air, gathers less grease and is usually quieter.
If you live in a flat in Northamptonshire, ask the freeholder, factor or managing agent about outside vents before you buy a ducted hood.
Check the minimum height above the hob in both the hood and hob instructions, and use the greater of the two figures.

Questions about cooker hood installation in Northampton

How much does cooker hood installation cost in Northampton?

Guide prices in Northampton are about £120 to £230 including VAT for a like-for-like cooker hood swap. The final price depends on the size of the kitchen and what is moving, and is set out in an itemised written quote.

Which parts of Northampton do you work in?

All of them. Our Northamptonshire coverage takes in the whole of Northampton, including the NN1 postcode district, as well as surrounding towns such as Wellingborough. If you are unsure, send us your postcode.

Why might a cooker hood need a spillage test?

Because a hood pulling air out of a room can draw fumes back down the flue of an open-flued gas appliance, such as some older boilers or gas fires. Where the kitchen, or a room open to it, has one, a Gas Safe registered engineer should carry out a spillage test with the hood running at full speed. Room-sealed boilers are not affected in the same way.

Does a cooker hood need a hole in the wall?

A ducted hood does. The usual route is a core-drilled hole through the nearest outside wall, with rigid ducting from the hood and an external grille sealed into the wall. Where the hob is far from an outside wall, the duct can sometimes run above the wall units or through a ceiling void. A recirculating hood needs no hole, but it removes no moisture.

Can a ducted cooker hood be fitted in a flat?

Often, but check consents first. A new vent through the outside wall of a flat may need planning permission and the freeholder's written consent, and some leases do not allow it at all. Where an outside vent is not possible, a recirculating hood can be fitted, with a separate extract fan or other ventilation dealing with moisture. Listed buildings may also need listed building consent.

Also covering nearby towns

Neighbouring towns where we offer cooker hood installation: