Cooker hood installation · England
Cooker hood installation in Cambridgeshire
If you need cooker hood installation anywhere in Cambridgeshire, we survey the kitchen, agree the scope with you and book every trade through to handover.
Why cooker hood installation for a Cambridgeshire home?
If your Cambridgeshire house has thick solid walls, core drilling a neat hole for the duct takes the right equipment and careful positioning of the outside grille.
If condensation runs down the windows of your Cambridgeshire kitchen whenever you cook, the hood may be recirculating, undersized or ducted through a long, flexible run.
What does cooker hood installation in Cambridgeshire include?
Your written quote lists everything included. For cooker hood installation, that normally means:
- Survey of the hob position, duct route, outside wall and any open-flued appliance
- Hood fixed at the height set by the hood and hob manufacturers
- Core drilling through the outside wall and an external grille fitted and sealed
- Short, straight runs of rigid ducting wherever the route allows
- Island and ceiling hoods fixed into the ceiling structure by two people
- Recirculating hoods fitted with carbon filters, and their limits explained
- Power supply connected by an electrician and tested to BS 7671
- Spillage test by a Gas Safe registered engineer where an open-flued appliance is present
How much does cooker hood installation cost in Cambridgeshire?
These guide ranges include VAT at 20% and are adjusted for prices in the East of England. We confirm your price in writing after a free survey visit. Prices in the East of England usually run above the national guide, mainly because labour and parking cost more.
| Typical project | Guide price |
|---|---|
| Like-for-like cooker hood swapSame position and ducting | £130–£260 |
| New ducted hood through an outside wallCore drilling, ducting run and external grille | £320–£970 |
| Island or ceiling hood installedTwo-person install, fixings to the ceiling structure | £320–£680 |
| Recirculating hood fittedNo ducting; carbon filters need replacing | £130–£320 |
Guide ranges cover fitting and connection with standard ducting through a straightforward wall; long or concealed duct runs, ceiling repairs, new electrical spurs, spillage tests and the hood itself are priced separately. Prices include VAT at 20%.
Kitchens in homes across Cambridgeshire
Across Cambridgeshire you will often find Victorian terraces, 1930s semis, post-war estate houses and fenland bungalows and farmhouses, and each shapes the kitchen differently. Terraced houses in Cambridge and Peterborough often have a narrow galley at the back, while Fen bungalows tend to have a simple square kitchen beside the living room.
Water across Cambridgeshire is very hard, so limescale on taps and boiling water taps is common and a filter or softener is worth thinking about. Fen roads and farm tracks can be narrow for delivery lorries, and city-centre terraces often have permit parking and no rear access for long worktops.
Victorian terraces here often have a small rear kitchen, and opening it into the dining room is a common way to gain space. For a Fenland bungalow or farmhouse, the job may also involve levelling uneven floors and packing out walls before the units go in.
Rules for cooker hood installation in Cambridgeshire
In England, Approved Document F guidance for kitchen extract is about 30 litres per second from a cooker hood extracting outside, or 60 litres per second from a fan elsewhere in the room. A recirculating hood does not remove moisture, so another means of extract is usually needed. A new vent through the outside wall of a flat may need planning permission and the freeholder's consent, and an open-flued gas appliance in the room calls for a spillage test.
Listed houses in historic centres such as Cambridge and Ely may need consent for internal changes or a new vent, although a straightforward kitchen fit needs no planning permission.
Before you start
- If the kitchen has an open-flued boiler or gas fire, a Gas Safe registered engineer should carry out a spillage test after the hood is fitted.
- Check the minimum height above the hob in both the hood and hob instructions, and use the greater of the two figures.
- Keep the duct run short and straight with rigid ducting, because every bend and extra metre of flexible hose reduces how much air the hood moves.
- Choose ducted extraction where you can; a recirculating hood filters grease and smells but leaves the moisture from cooking in the room.
- For an island hood in your Cambridgeshire kitchen, settle the hood position before the ceiling is boarded, so timber supports can be added in the right place.
- Ask for rigid ducting rather than flexible hose wherever the route allows, as it moves more air, gathers less grease and is usually quieter.
Questions about cooker hood installation in Cambridgeshire
How much does cooker hood installation cost in Cambridgeshire?
For a like-for-like cooker hood swap, budget around £130 to £260 including VAT in Cambridgeshire. That reflects typical costs in the East of England; we confirm the actual figure in writing once we have measured up.
Do you cover the whole of Cambridgeshire?
Yes. We carry out cooker hood installation across Cambridgeshire, including Peterborough, Cambridge, Wisbech and St Neots. Every job starts with a free survey visit and an itemised written quote.
Does a cooker hood need a hole in the wall?
A ducted hood does. The usual route is a core-drilled hole through the nearest outside wall, with rigid ducting from the hood and an external grille sealed into the wall. Where the hob is far from an outside wall, the duct can sometimes run above the wall units or through a ceiling void. A recirculating hood needs no hole, but it removes no moisture.
Should I choose a ducted or a recirculating cooker hood?
A ducted hood is usually more effective, because it takes steam, smoke and smells outside. A recirculating hood passes air through grease and carbon filters and returns it to the room, so it deals with grease and smells but not moisture, and another means of extract is usually needed. Recirculating suits kitchens with no practical duct route, and its carbon filters need replacing.
Why might a cooker hood need a spillage test?
Because a hood pulling air out of a room can draw fumes back down the flue of an open-flued gas appliance, such as some older boilers or gas fires. Where the kitchen, or a room open to it, has one, a Gas Safe registered engineer should carry out a spillage test with the hood running at full speed. Room-sealed boilers are not affected in the same way.
Cooker hood installation in towns across Cambridgeshire
Choose a town for local guide prices and postcode coverage:
- Cooker hood installation in Peterborough
- Cooker hood installation in Cambridge
- Cooker hood installation in Wisbech
- Cooker hood installation in St Neots
- Cooker hood installation in Huntingdon
- Cooker hood installation in March
- Cooker hood installation in Ely