Cooker hood installation · Scotland
Cooker hood installation in Renfrewshire and Inverclyde
Our cooker hood installation work covers the whole of Renfrewshire and Inverclyde, including Paisley, Greenock and Newton Mearns.
What prompts cooker hood installation in Renfrewshire and Inverclyde?
If your Renfrewshire and Inverclyde kitchen has an older open-flued boiler, fitting a stronger hood needs care, as it can affect the flue and should be followed by a spillage test.
Some Renfrewshire and Inverclyde households simply want a quieter, more effective hood after years of a noisy one that barely clears the steam above a busy family hob.
What does cooker hood installation in Renfrewshire and Inverclyde include?
The exact scope is agreed after the survey, but a typical job in Renfrewshire and Inverclyde covers:
- Survey of the hob position, duct route, outside wall and any open-flued appliance
- Hood fixed at the height set by the hood and hob manufacturers
- Core drilling through the outside wall and an external grille fitted and sealed
- Short, straight runs of rigid ducting wherever the route allows
- Island and ceiling hoods fixed into the ceiling structure by two people
- Recirculating hoods fitted with carbon filters, and their limits explained
- Power supply connected by an electrician and tested to BS 7671
- Spillage test by a Gas Safe registered engineer where an open-flued appliance is present
How much does cooker hood installation cost in Renfrewshire and Inverclyde?
Use these ranges to plan your budget. They include VAT, reflect costs in Scotland, and are firmed up once we have seen your Renfrewshire and Inverclyde kitchen. Costs across Scotland tend to sit under UK averages, which these ranges reflect.
| Typical project | Guide price |
|---|---|
| Like-for-like cooker hood swapSame position and ducting | £110–£230 |
| New ducted hood through an outside wallCore drilling, ducting run and external grille | £280–£850 |
| Island or ceiling hood installedTwo-person install, fixings to the ceiling structure | £280–£590 |
| Recirculating hood fittedNo ducting; carbon filters need replacing | £110–£280 |
Guide ranges cover fitting and connection with standard ducting through a straightforward wall; long or concealed duct runs, ceiling repairs, new electrical spurs, spillage tests and the hood itself are priced separately. Prices include VAT at 20%.
Kitchens in homes across Renfrewshire and Inverclyde
The housing mix across Renfrewshire and Inverclyde includes sandstone tenement flats, Victorian villas, four-in-a-block flats and new-build estates, so no two kitchen fits are quite alike. Paisley and Greenock tenement flats often have a kitchen off the hall, while villas and newer homes in Newton Mearns tend to have larger kitchens with island space.
Water in Renfrewshire and Inverclyde is soft, which is kind to taps and appliances and keeps limescale on boiling water taps to a minimum. Steep streets in Greenock, tenement common stairs and four-in-a-block flats with outside stairs can all affect deliveries and worktop handling.
If your home is a tenement flat, the kitchen is often small with a high ceiling, and tall units or a high-level shelf make good use of the height. Villas and newer family homes tend to suit a supply-and-fit kitchen with an island, integrated appliances and a separate utility space.
Rules for cooker hood installation in Renfrewshire and Inverclyde
In Scotland, standard 3.14 of the domestic Technical Handbook expects kitchens to have extract ventilation, and a recirculating hood alone does not remove moisture. Fitting an extractor fan or a ducted hood does not normally need a building warrant. In a flat, a new vent through a shared outside wall may need the other owners' agreement and planning permission, and a listed building may need listed building consent. Where the room has an open-flued gas appliance, a Gas Safe registered engineer should carry out a spillage test after the hood is fitted.
Paisley and Greenock have conservation areas and listed buildings, so a new external vent may need consent, and tenement owners may need neighbours' agreement.
Before you start
- Keep the duct run short and straight with rigid ducting, because every bend and extra metre of flexible hose reduces how much air the hood moves.
- If the kitchen has an open-flued boiler or gas fire, a Gas Safe registered engineer should carry out a spillage test after the hood is fitted.
- In a flat or a listed building, check what consents are needed before any hole is cut through an outside wall.
- For an island or ceiling hood, find out what is above the ceiling, as joists or added timbers are needed to carry the weight securely.
- If your Renfrewshire and Inverclyde home is listed, or in a building with strict rules on outside changes, check what is allowed before any hole is cut for a duct.
- For an island hood in your Renfrewshire and Inverclyde kitchen, settle the hood position before the ceiling is boarded, so timber supports can be added in the right place.
Questions about cooker hood installation in Renfrewshire and Inverclyde
How much does cooker hood installation cost in Renfrewshire and Inverclyde?
For a like-for-like cooker hood swap, budget around £110 to £230 including VAT in Renfrewshire and Inverclyde. That reflects typical costs in Scotland; we confirm the actual figure in writing once we have measured up.
Do you cover the whole of Renfrewshire and Inverclyde?
Yes. We carry out cooker hood installation across Renfrewshire and Inverclyde, including Paisley, Greenock, Newton Mearns and Renfrew. Every job starts with a free survey visit and an itemised written quote.
Why might a cooker hood need a spillage test?
Because a hood pulling air out of a room can draw fumes back down the flue of an open-flued gas appliance, such as some older boilers or gas fires. Where the kitchen, or a room open to it, has one, a Gas Safe registered engineer should carry out a spillage test with the hood running at full speed. Room-sealed boilers are not affected in the same way.
Does a cooker hood need a hole in the wall?
A ducted hood does. The usual route is a core-drilled hole through the nearest outside wall, with rigid ducting from the hood and an external grille sealed into the wall. Where the hob is far from an outside wall, the duct can sometimes run above the wall units or through a ceiling void. A recirculating hood needs no hole, but it removes no moisture.
How high should a cooker hood be above the hob?
At least the minimum distance given by the manufacturers. Both the hood and the hob instructions set a minimum gap between them, and where they differ the greater figure should be used. Gas hobs usually need more clearance than induction. A hood fitted too low is a fire risk, while one fitted much higher than recommended captures less steam.
Cooker hood installation in towns across Renfrewshire and Inverclyde
Choose a town for local guide prices and postcode coverage:
- Cooker hood installation in Paisley
- Cooker hood installation in Greenock
- Cooker hood installation in Newton Mearns
- Cooker hood installation in Renfrew
- Cooker hood installation in Barrhead
- Cooker hood installation in Johnstone
- Cooker hood installation in Erskine