Cooker hood installation in Blantyre

Why do people in Blantyre choose cooker hood installation?

A new kitchen in a Blantyre home can move the hob away from the old vent, so the hood, the duct run and the wall grille all need rethinking together.

Cooks across Lanarkshire who fry, grill or stir-fry often find a recirculating hood leaves smells in the house, and look at ducting the air outside instead. We cover all of Blantyre, including the G71 and G72 postcode districts, and travel out to neighbouring towns across Lanarkshire.

What we cover for cooker hood installation in Blantyre

After the survey visit we write the scope down. For cooker hood installation in Blantyre it usually covers:

Core drilling through the outside wall and an external grille fitted and sealed
Survey of the hob position, duct route, outside wall and any open-flued appliance
Spillage test by a Gas Safe registered engineer where an open-flued appliance is present
Island and ceiling hoods fixed into the ceiling structure by two people
Power supply connected by an electrician and tested to BS 7671
Short, straight runs of rigid ducting wherever the route allows

What should you budget for cooker hood installation in Blantyre?

The figures below are guide prices for Blantyre, including VAT and adjusted for typical costs across Scotland. The fixed price comes after we have measured up. Prices in Scotland usually come in below the national guide, as labour rates are lower than in the South East.

What should you budget for cooker hood installation in Blantyre?
Typical project	Guide price
Like-for-like cooker hood swapSame position and ducting	£110–£230
New ducted hood through an outside wallCore drilling, ducting run and external grille	£280–£850
Island or ceiling hood installedTwo-person install, fixings to the ceiling structure	£280–£590
Recirculating hood fittedNo ducting; carbon filters need replacing	£110–£280

Guide ranges cover fitting and connection with standard ducting through a straightforward wall; long or concealed duct runs, ceiling repairs, new electrical spurs, spillage tests and the hood itself are priced separately. Prices include VAT at 20%.

Kitchens in homes around Blantyre

In and around Blantyre, homes range across sandstone tenement flats, four-in-a-block flats, new town houses and interwar council-built semis. New-town houses in East Kilbride and Cumbernauld often have a compact galley, while tenement and four-in-a-block flats tend to have a small kitchen off the hall or at the back.

Lanarkshire's mains water is soft, so limescale is rarely an issue and taps, sinks and boiling water taps tend to stay cleaner. Common stairs in tenements and upper four-in-a-block flats mean units are carried by hand, while new-town estates may have parking courts some distance from the door.

Regulations for kitchen work in Blantyre

In Scotland, standard 3.14 of the domestic Technical Handbook expects kitchens to have extract ventilation, and a recirculating hood alone does not remove moisture. Fitting an extractor fan or a ducted hood does not normally need a building warrant. In a flat, a new vent through a shared outside wall may need the other owners' agreement and planning permission, and a listed building may need listed building consent. Where the room has an open-flued gas appliance, a Gas Safe registered engineer should carry out a spillage test after the hood is fitted.

The New Lanark World Heritage Site, other listed buildings and conservation areas may need consent for new vents, and flat owners may need neighbours' agreement.

Planning ahead

Ask for rigid ducting rather than flexible hose wherever the route allows, as it moves more air, gathers less grease and is usually quieter.
Check whether your Blantyre home has an open-flued boiler or gas fire, and mention it at the survey so a spillage test can be planned.
Choose a hood at least as wide as your hob, and compare its stated extraction rate with the size of the room before you buy.
For an island or ceiling hood, find out what is above the ceiling, as joists or added timbers are needed to carry the weight securely.

Questions about cooker hood installation in Blantyre

How much does cooker hood installation cost in Blantyre?

Cooker hood installation in Blantyre typically costs £110 to £230 including VAT for a like-for-like cooker hood swap, based on prices in Scotland. Larger or more involved jobs cost more, and your price is fixed in writing after a free survey visit.

Which parts of Blantyre do you work in?

All of them. Our Lanarkshire coverage takes in the whole of Blantyre, including the G71 and G72 postcode districts, as well as surrounding towns such as Viewpark. If you are unsure, send us your postcode.

Why might a cooker hood need a spillage test?

Because a hood pulling air out of a room can draw fumes back down the flue of an open-flued gas appliance, such as some older boilers or gas fires. Where the kitchen, or a room open to it, has one, a Gas Safe registered engineer should carry out a spillage test with the hood running at full speed. Room-sealed boilers are not affected in the same way.

Should I choose a ducted or a recirculating cooker hood?

A ducted hood is usually more effective, because it takes steam, smoke and smells outside. A recirculating hood passes air through grease and carbon filters and returns it to the room, so it deals with grease and smells but not moisture, and another means of extract is usually needed. Recirculating suits kitchens with no practical duct route, and its carbon filters need replacing.

Does a cooker hood need a hole in the wall?

A ducted hood does. The usual route is a core-drilled hole through the nearest outside wall, with rigid ducting from the hood and an external grille sealed into the wall. Where the hob is far from an outside wall, the duct can sometimes run above the wall units or through a ceiling void. A recirculating hood needs no hole, but it removes no moisture.

Nearby places we cover

Neighbouring towns where we offer cooker hood installation: