Cooker hood installation · England
Cooker hood installation in the Isle of Wight
If you need cooker hood installation anywhere in the Isle of Wight, we survey the kitchen, agree the scope with you and book every trade through to handover.
When does cooker hood installation make sense in the Isle of Wight?
If condensation runs down the windows of your Isle of Wight kitchen whenever you cook, the hood may be recirculating, undersized or ducted through a long, flexible run.
Some Isle of Wight households simply want a quieter, more effective hood after years of a noisy one that barely clears the steam above a busy family hob.
What does cooker hood installation in the Isle of Wight include?
Your written quote lists everything included. For cooker hood installation, that normally means:
- Survey of the hob position, duct route, outside wall and any open-flued appliance
- Hood fixed at the height set by the hood and hob manufacturers
- Core drilling through the outside wall and an external grille fitted and sealed
- Short, straight runs of rigid ducting wherever the route allows
- Island and ceiling hoods fixed into the ceiling structure by two people
- Recirculating hoods fitted with carbon filters, and their limits explained
- Power supply connected by an electrician and tested to BS 7671
- Spillage test by a Gas Safe registered engineer where an open-flued appliance is present
How much does cooker hood installation cost in the Isle of Wight?
As a starting point for the Isle of Wight, these ranges include VAT at 20% and allow for typical labour costs in the South East. Labour in the South East generally costs more than the UK average, which lifts these ranges a little.
| Typical project | Guide price |
|---|---|
| Like-for-like cooker hood swapSame position and ducting | £140–£280 |
| New ducted hood through an outside wallCore drilling, ducting run and external grille | £340–£1,000 |
| Island or ceiling hood installedTwo-person install, fixings to the ceiling structure | £340–£720 |
| Recirculating hood fittedNo ducting; carbon filters need replacing | £140–£340 |
Guide ranges cover fitting and connection with standard ducting through a straightforward wall; long or concealed duct runs, ceiling repairs, new electrical spurs, spillage tests and the hood itself are priced separately. Prices include VAT at 20%.
Kitchens in homes across the Isle of Wight
Across the Isle of Wight you will often find Victorian seaside villas, stone cottages, post-war bungalows and converted flats, and each shapes the kitchen differently. Victorian villas split into flats often have compact kitchens in former bedrooms, while bungalows and cottages tend to have small square kitchens at the back.
Mains water on the Isle of Wight is hard, so limescale on taps, kettles and boiling water taps is common and a filter can help. Kitchen units, worktops and appliances usually cross on the vehicle ferry, so delivery dates and crossing times need planning before the fit is booked.
Converted Victorian villas can mean a small kitchen with shared services and pipework running through neighbouring flats, so the layout needs careful planning. Many island bungalows are being updated for easier living, with better lighting, practical storage, more drawers and appliances at a comfortable height.
Rules for cooker hood installation in the Isle of Wight
In England, Approved Document F guidance for kitchen extract is about 30 litres per second from a cooker hood extracting outside, or 60 litres per second from a fan elsewhere in the room. A recirculating hood does not remove moisture, so another means of extract is usually needed. A new vent through the outside wall of a flat may need planning permission and the freeholder's consent, and an open-flued gas appliance in the room calls for a spillage test.
Listed buildings and conservation areas in the older island towns may need consent for a new external vent, and flat owners usually need the freeholder's written consent.
Before you start
- If the kitchen has an open-flued boiler or gas fire, a Gas Safe registered engineer should carry out a spillage test after the hood is fitted.
- Keep the duct run short and straight with rigid ducting, because every bend and extra metre of flexible hose reduces how much air the hood moves.
- For an island or ceiling hood, find out what is above the ceiling, as joists or added timbers are needed to carry the weight securely.
- In a flat or a listed building, check what consents are needed before any hole is cut through an outside wall.
- If your Isle of Wight home is listed, or in a building with strict rules on outside changes, check what is allowed before any hole is cut for a duct.
- Check whether your Isle of Wight home has an open-flued boiler or gas fire, and mention it at the survey so a spillage test can be planned.
Questions about cooker hood installation in the Isle of Wight
How much does cooker hood installation cost in the Isle of Wight?
For a like-for-like cooker hood swap, budget around £140 to £280 including VAT in the Isle of Wight. That reflects typical costs in the South East; we confirm the actual figure in writing once we have measured up.
Do you cover the whole of the Isle of Wight?
Yes. We carry out cooker hood installation across the Isle of Wight, including Newport, Isle of Wight, Ryde, Cowes and Sandown. Every job starts with a free survey visit and an itemised written quote.
Does a cooker hood need a hole in the wall?
A ducted hood does. The usual route is a core-drilled hole through the nearest outside wall, with rigid ducting from the hood and an external grille sealed into the wall. Where the hob is far from an outside wall, the duct can sometimes run above the wall units or through a ceiling void. A recirculating hood needs no hole, but it removes no moisture.
Why might a cooker hood need a spillage test?
Because a hood pulling air out of a room can draw fumes back down the flue of an open-flued gas appliance, such as some older boilers or gas fires. Where the kitchen, or a room open to it, has one, a Gas Safe registered engineer should carry out a spillage test with the hood running at full speed. Room-sealed boilers are not affected in the same way.
Can a ducted cooker hood be fitted in a flat?
Often, but check consents first. A new vent through the outside wall of a flat may need planning permission and the freeholder's written consent, and some leases do not allow it at all. Where an outside vent is not possible, a recirculating hood can be fitted, with a separate extract fan or other ventilation dealing with moisture. Listed buildings may also need listed building consent.
Cooker hood installation in towns across the Isle of Wight
Choose a town for local guide prices and postcode coverage:
- Cooker hood installation in Newport, Isle of Wight
- Cooker hood installation in Ryde
- Cooker hood installation in Cowes
- Cooker hood installation in Sandown