Cooker hood installation in Sandown

Is cooker hood installation right for your Sandown kitchen?

People in flats across the Isle of Wight sometimes rely on recirculating hoods because an outside vent needs consent from the building's owners, and want to know what else improves ventilation.

If your Sandown house has thick solid walls, core drilling a neat hole for the duct takes the right equipment and careful positioning of the outside grille. Kitchens in every part of Sandown are covered, and the survey visit is free wherever you are in the Isle of Wight.

What is included in the work?

Every kitchen is different, so we confirm the scope in writing. Most jobs of this kind include:

Short, straight runs of rigid ducting wherever the route allows
Recirculating hoods fitted with carbon filters, and their limits explained
Island and ceiling hoods fixed into the ceiling structure by two people
Power supply connected by an electrician and tested to BS 7671
Hood fixed at the height set by the hood and hob manufacturers
Core drilling through the outside wall and an external grille fitted and sealed

Guide prices for cooker hood installation in Sandown

Typical cooker hood installation prices for homes in Sandown, including VAT and adjusted for the South East. Your own figure depends on the size of the kitchen, the layout and what is moving. Prices in the South East usually run above the national guide, mainly because labour and parking cost more.

Guide prices for cooker hood installation in Sandown
Typical project	Guide price
Like-for-like cooker hood swapSame position and ducting	£140–£280
New ducted hood through an outside wallCore drilling, ducting run and external grille	£340–£1,000
Island or ceiling hood installedTwo-person install, fixings to the ceiling structure	£340–£720
Recirculating hood fittedNo ducting; carbon filters need replacing	£140–£340

Guide ranges cover fitting and connection with standard ducting through a straightforward wall; long or concealed duct runs, ceiling repairs, new electrical spurs, spillage tests and the hood itself are priced separately. Prices include VAT at 20%.

Kitchens in homes around Sandown

You will find Victorian seaside villas, stone cottages, post-war bungalows and converted flats throughout the Isle of Wight. Victorian villas split into flats often have compact kitchens in former bedrooms, while bungalows and cottages tend to have small square kitchens at the back.

Kitchen units, worktops and appliances usually cross on the vehicle ferry, so delivery dates and crossing times need planning before the fit is booked. Mains water on the Isle of Wight is hard, so limescale on taps, kettles and boiling water taps is common and a filter can help.

Regulations for kitchen work in Sandown

In England, Approved Document F guidance for kitchen extract is about 30 litres per second from a cooker hood extracting outside, or 60 litres per second from a fan elsewhere in the room. A recirculating hood does not remove moisture, so another means of extract is usually needed. A new vent through the outside wall of a flat may need planning permission and the freeholder's consent, and an open-flued gas appliance in the room calls for a spillage test.

Listed buildings and conservation areas in the older island towns may need consent for a new external vent, and flat owners usually need the freeholder's written consent.

Getting the most from your cooker hood installation

Ask for rigid ducting rather than flexible hose wherever the route allows, as it moves more air, gathers less grease and is usually quieter.
Before choosing a hood for your Sandown kitchen, find the nearest outside wall to the hob, because the shorter the duct run, the better the extraction.
If your Sandown home is listed, or in a building with strict rules on outside changes, check what is allowed before any hole is cut for a duct.
If the kitchen has an open-flued boiler or gas fire, a Gas Safe registered engineer should carry out a spillage test after the hood is fitted.

Questions about cooker hood installation in Sandown

How much does cooker hood installation cost in Sandown?

For a like-for-like cooker hood swap, budget around £140 to £280 including VAT in Sandown. That reflects typical costs in the South East; we confirm the actual figure in writing once we have measured up.

Which parts of Sandown do you work in?

All of them. Our Isle of Wight coverage takes in the whole of Sandown, including the PO36 postcode district, as well as surrounding towns such as Ryde. If you are unsure, send us your postcode.

Does a cooker hood need a hole in the wall?

A ducted hood does. The usual route is a core-drilled hole through the nearest outside wall, with rigid ducting from the hood and an external grille sealed into the wall. Where the hob is far from an outside wall, the duct can sometimes run above the wall units or through a ceiling void. A recirculating hood needs no hole, but it removes no moisture.

How high should a cooker hood be above the hob?

At least the minimum distance given by the manufacturers. Both the hood and the hob instructions set a minimum gap between them, and where they differ the greater figure should be used. Gas hobs usually need more clearance than induction. A hood fitted too low is a fire risk, while one fitted much higher than recommended captures less steam.

Should I choose a ducted or a recirculating cooker hood?

A ducted hood is usually more effective, because it takes steam, smoke and smells outside. A recirculating hood passes air through grease and carbon filters and returns it to the room, so it deals with grease and smells but not moisture, and another means of extract is usually needed. Recirculating suits kitchens with no practical duct route, and its carbon filters need replacing.

Cooker hood installation in neighbouring towns

The same service is available a short drive from Sandown, including: