Cooker hood installation · England
Cooker hood installation in Dorset
We carry out cooker hood installation across Dorset, from Bournemouth to the smaller towns, with a free survey visit and an itemised written quote as standard.
Why cooker hood installation for a Dorset home?
If your Dorset house has thick solid walls, core drilling a neat hole for the duct takes the right equipment and careful positioning of the outside grille.
Some Dorset households simply want a quieter, more effective hood after years of a noisy one that barely clears the steam above a busy family hob.
What does cooker hood installation in Dorset include?
After the survey visit we write the scope down. For cooker hood installation in Dorset it usually covers:
- Survey of the hob position, duct route, outside wall and any open-flued appliance
- Hood fixed at the height set by the hood and hob manufacturers
- Core drilling through the outside wall and an external grille fitted and sealed
- Short, straight runs of rigid ducting wherever the route allows
- Island and ceiling hoods fixed into the ceiling structure by two people
- Recirculating hoods fitted with carbon filters, and their limits explained
- Power supply connected by an electrician and tested to BS 7671
- Spillage test by a Gas Safe registered engineer where an open-flued appliance is present
How much does cooker hood installation cost in Dorset?
As a starting point for Dorset, these ranges include VAT at 20% and allow for typical labour costs in the South West. Prices across the South West are broadly in line with UK averages.
| Typical project | Guide price |
|---|---|
| Like-for-like cooker hood swapSame position and ducting | £120–£250 |
| New ducted hood through an outside wallCore drilling, ducting run and external grille | £310–£930 |
| Island or ceiling hood installedTwo-person install, fixings to the ceiling structure | £310–£650 |
| Recirculating hood fittedNo ducting; carbon filters need replacing | £120–£310 |
Guide ranges cover fitting and connection with standard ducting through a straightforward wall; long or concealed duct runs, ceiling repairs, new electrical spurs, spillage tests and the hood itself are priced separately. Prices include VAT at 20%.
Kitchens in homes across Dorset
The housing mix across Dorset includes thatched cottages, Victorian and Edwardian villas, 1930s semis and seaside bungalows, so no two kitchen fits are quite alike. Edwardian villas in Bournemouth often have a separate kitchen and scullery, while 1930s semis and bungalows tend to have a compact room at the back.
Most of Dorset has hard water, so limescale on taps, sinks and boiling water taps is common, and a scale-reducing filter can help. Flats in converted villas may have no lift and shared hallways, and narrow village lanes can make delivering long worktops difficult.
Converted villa flats often mean fitting a full kitchen into a small room while keeping neighbours and shared services in mind. Many bungalow owners choose to open the kitchen into the dining room, so the layout and new lighting need planning together.
Rules for cooker hood installation in Dorset
In England, Approved Document F guidance for kitchen extract is about 30 litres per second from a cooker hood extracting outside, or 60 litres per second from a fan elsewhere in the room. A recirculating hood does not remove moisture, so another means of extract is usually needed. A new vent through the outside wall of a flat may need planning permission and the freeholder's consent, and an open-flued gas appliance in the room calls for a spillage test.
Thatched and listed cottages may need listed building consent for internal changes, and owners of flats in converted houses usually need the freeholder's consent before work starts.
Before you start
- For an island or ceiling hood, find out what is above the ceiling, as joists or added timbers are needed to carry the weight securely.
- Keep the duct run short and straight with rigid ducting, because every bend and extra metre of flexible hose reduces how much air the hood moves.
- Check the minimum height above the hob in both the hood and hob instructions, and use the greater of the two figures.
- Choose ducted extraction where you can; a recirculating hood filters grease and smells but leaves the moisture from cooking in the room.
- For an island hood in your Dorset kitchen, settle the hood position before the ceiling is boarded, so timber supports can be added in the right place.
- Ask for rigid ducting rather than flexible hose wherever the route allows, as it moves more air, gathers less grease and is usually quieter.
Questions about cooker hood installation in Dorset
How much does cooker hood installation cost in Dorset?
For a like-for-like cooker hood swap, budget around £120 to £250 including VAT in Dorset. That reflects typical costs in the South West; we confirm the actual figure in writing once we have measured up.
Do you cover the whole of Dorset?
Yes. We carry out cooker hood installation across Dorset, including Bournemouth, Poole, Weymouth and Christchurch. Every job starts with a free survey visit and an itemised written quote.
Can a ducted cooker hood be fitted in a flat?
Often, but check consents first. A new vent through the outside wall of a flat may need planning permission and the freeholder's written consent, and some leases do not allow it at all. Where an outside vent is not possible, a recirculating hood can be fitted, with a separate extract fan or other ventilation dealing with moisture. Listed buildings may also need listed building consent.
Should I choose a ducted or a recirculating cooker hood?
A ducted hood is usually more effective, because it takes steam, smoke and smells outside. A recirculating hood passes air through grease and carbon filters and returns it to the room, so it deals with grease and smells but not moisture, and another means of extract is usually needed. Recirculating suits kitchens with no practical duct route, and its carbon filters need replacing.
Does a cooker hood need a hole in the wall?
A ducted hood does. The usual route is a core-drilled hole through the nearest outside wall, with rigid ducting from the hood and an external grille sealed into the wall. Where the hob is far from an outside wall, the duct can sometimes run above the wall units or through a ceiling void. A recirculating hood needs no hole, but it removes no moisture.
Cooker hood installation in towns across Dorset
Choose a town for local guide prices and postcode coverage:
- Cooker hood installation in Bournemouth
- Cooker hood installation in Poole
- Cooker hood installation in Weymouth
- Cooker hood installation in Christchurch
- Cooker hood installation in Dorchester
- Cooker hood installation in Bridport
- Cooker hood installation in Blandford Forum
- Cooker hood installation in Swanage
- Cooker hood installation in Sherborne
- Cooker hood installation in Shaftesbury