Utility room fitting in Hythe, Hampshire

Why do people in Hythe, Hampshire choose utility room fitting?

When a new kitchen is being planned in Hampshire, moving the laundry to a utility often makes room for deep drawers or a dishwasher in the kitchen itself.

Dog owners and keen walkers around Hythe, Hampshire often ask for a utility with a deep sink, a coat cupboard and somewhere to leave muddy boots and wet jackets. Kitchens in every part of Hythe, Hampshire are covered, and the survey visit is free wherever you are in Hampshire.

What we cover for utility room fitting in Hythe, Hampshire

Here is what usually goes into utility room fitting, adjusted to your Hythe, Hampshire kitchen after we have measured it:

Base, wall and tall units fitted, levelled and fixed to the wall
Washing machine supply, waste and isolation valve, tested for leaks
A vent to outside for a vented dryer, or a drain hose for condenser models
Utility sink and tap plumbed in, with new supplies and waste where none exist
Extract fan fitted to clear moisture from washing and drying
Stacking kit fitted where the washer and dryer sit one above the other

Utility room fitting prices in Hythe, Hampshire

These guide ranges include VAT at 20% and are adjusted for prices in the South East. We confirm your price in writing after a free survey visit. Prices in the South East usually run above the national guide, mainly because labour and parking cost more.

Utility room fitting prices in Hythe, Hampshire
Typical project	Guide price
Utility units and worktop fitted (fit only)Three to six units, laminate worktop, panels	£1,400–£3,400
Utility room supplied and fittedUnits, worktop, sink, washer and dryer connections	£3,400–£8,000
New utility plumbing for a sink and washing machineSupplies, waste and valves where none exist	£460–£1,200

Fit-only and supply-and-fit ranges cover units, worktop and standard sink and appliance connections, with new plumbing where none exists as a separate line; extract fans, dryer vents and new circuits are quoted on top. Prices include VAT at 20%.

What kind of kitchens do we fit in Hythe, Hampshire?

In and around Hythe, Hampshire, homes range across Victorian terraces, 1930s semis, post-war estate houses and thatched and brick cottages. Terraces in Southampton and Portsmouth often have a narrow back kitchen, while post-war estate houses tend to have a compact rectangular room suited to an L-shape.

Dense terraced streets can be very tight for parking, and New Forest lanes and village roads may limit the size of delivery vehicle. Water across Hampshire is mostly hard, largely from chalk sources, so limescale on taps and boiling water taps is common and a filter can help.

Regulations for kitchen work in Hythe, Hampshire

Fitting a utility room needs no planning permission in England, though a new dryer vent through the outside wall of a flat may need planning permission and the freeholder's consent. Adding sockets to an existing circuit is not notifiable, but a new circuit is, under Part P. Approved Document F sets an extract rate of about 30 litres per second for a utility room, so a new fan should be sized to meet it, and if an open-flued boiler shares the room, a Gas Safe registered engineer should carry out a spillage test once a fan is fitted.

Homes within the New Forest or South Downs national parks, listed cottages and conservation areas may need consent for a new extractor vent or alterations to historic features.

Worth knowing before the fit

In a Hythe, Hampshire flat, check with the freeholder before a new dryer vent or extract fan is cut through an outside wall.
Ask for an isolation valve on the washing machine supply that can be reached without pulling the machine out from under the worktop.
Before choosing a dryer for your Hythe, Hampshire utility, check whether there is an outside wall close enough for a short, straight vent duct.
A utility in a garage needs to be dry, lit and kept above freezing already; converting the garage itself is a separate building job.

Questions about utility room fitting in Hythe, Hampshire

How much does utility room fitting cost in Hythe, Hampshire?

For fitting three to six utility units and a worktop you have bought, budget around £1,400 to £3,400 including VAT in Hythe, Hampshire. That reflects typical costs in the South East; we confirm the actual figure in writing once we have measured up.

Do you work near Hythe, Hampshire as well?

Yes. As well as Hythe, Hampshire itself, we cover the rest of Hampshire and nearby towns such as Southampton and Totton. The process is the same wherever the kitchen is.

Can a worktop go over a washing machine and dryer?

Yes, and it is one of the most common utility layouts. The worktop is supported by units, end panels or a rail at each side rather than resting on the machines, with a small gap above them for vibration and so they can be slid out for servicing. Standard front-loading machines usually fit under a standard-height worktop, but we check the appliance heights against the plan first.

Can a utility room go in a garage or under the stairs?

Often, yes, as long as the space already exists and is usable. In a garage it needs to be dry and protected from frost, with power and a route for water and waste. Under the stairs, check the headroom, the ventilation and whether a door can open fully. We fit units and connect appliances in existing spaces; converting a garage into a habitable room is a separate building project.

Does a condenser or heat pump dryer need an outside vent?

No. Condenser and heat pump dryers do not need an outside vent, so they can go where a vented dryer cannot. They collect water in a container that has to be emptied, or they can be connected to the waste so they drain automatically, which is easy when the dryer sits beside the washing machine. They still give off some warmth, so the space needs air around it. A vented dryer needs a duct to an outside wall.

Utility room fitting near Hythe, Hampshire

Neighbouring towns where we offer utility room fitting: