Cooker hood installation · Kent
Cooker hood installation in Folkestone
From the survey to handover, cooker hood installation in Folkestone is run by us as one job, with the fitters and trades booked in the right order.
What prompts cooker hood installation in Folkestone?
People in flats across Kent sometimes rely on recirculating hoods because an outside vent needs consent from the building's owners, and want to know what else improves ventilation.
Some Folkestone households simply want a quieter, more effective hood after years of a noisy one that barely clears the steam above a busy family hob. If your home is in Folkestone or close by in Hythe, Kent or Dover, the same survey, quote and fitting process applies.
What is included in the work?
Here is what usually goes into cooker hood installation, adjusted to your Folkestone kitchen after we have measured it:
- Survey of the hob position, duct route, outside wall and any open-flued appliance
- Short, straight runs of rigid ducting wherever the route allows
- Power supply connected by an electrician and tested to BS 7671
- Hood fixed at the height set by the hood and hob manufacturers
- Island and ceiling hoods fixed into the ceiling structure by two people
- Core drilling through the outside wall and an external grille fitted and sealed
How much does cooker hood installation cost in Folkestone?
These guide ranges include VAT at 20% and are adjusted for prices in the South East. We confirm your price in writing after a free survey visit. Expect costs in the South East to sit somewhat above UK averages, reflecting local labour rates.
| Typical project | Guide price |
|---|---|
| Like-for-like cooker hood swapSame position and ducting | £140–£280 |
| New ducted hood through an outside wallCore drilling, ducting run and external grille | £340–£1,000 |
| Island or ceiling hood installedTwo-person install, fixings to the ceiling structure | £340–£720 |
| Recirculating hood fittedNo ducting; carbon filters need replacing | £140–£340 |
Guide ranges cover fitting and connection with standard ducting through a straightforward wall; long or concealed duct runs, ceiling repairs, new electrical spurs, spillage tests and the hood itself are priced separately. Prices include VAT at 20%.
What kind of kitchens do we fit in Folkestone?
You will find Victorian terraces, weatherboarded cottages, 1930s semis and oast house conversions throughout Kent. Victorian terraces in the Medway towns and along the coast often have a narrow back-addition kitchen, while 1930s semis usually have a small kitchen beside a separate dining room.
Seaside terraces, permit parking and narrow village lanes can each make deliveries slower, so the route for long worktops is best checked at the survey. Water across Kent is hard, so limescale builds up quickly on taps and boiling water taps, and a scale-reducing filter is worth considering.
Building regulations, electrics and gas in Folkestone
In England, Approved Document F guidance for kitchen extract is about 30 litres per second from a cooker hood extracting outside, or 60 litres per second from a fan elsewhere in the room. A recirculating hood does not remove moisture, so another means of extract is usually needed. A new vent through the outside wall of a flat may need planning permission and the freeholder's consent, and an open-flued gas appliance in the room calls for a spillage test.
Listed weatherboarded and timber-framed cottages, oast conversions and homes in conservation areas such as historic Canterbury may need consent for new external vents.
Before you book cooker hood installation in Folkestone
- Choose a hood at least as wide as your hob, and compare its stated extraction rate with the size of the room before you buy.
- For an island hood in your Folkestone kitchen, settle the hood position before the ceiling is boarded, so timber supports can be added in the right place.
- If you live in a flat in Kent, ask the freeholder, factor or managing agent about outside vents before you buy a ducted hood.
- Check the minimum height above the hob in both the hood and hob instructions, and use the greater of the two figures.
Questions about cooker hood installation in Folkestone
How much does cooker hood installation cost in Folkestone?
For a like-for-like cooker hood swap, budget around £140 to £280 including VAT in Folkestone. That reflects typical costs in the South East; we confirm the actual figure in writing once we have measured up.
Do you work near Folkestone as well?
Yes. As well as Folkestone itself, we cover the rest of Kent and nearby towns such as Hythe, Kent and Dover. The process is the same wherever the kitchen is.
How high should a cooker hood be above the hob?
At least the minimum distance given by the manufacturers. Both the hood and the hob instructions set a minimum gap between them, and where they differ the greater figure should be used. Gas hobs usually need more clearance than induction. A hood fitted too low is a fire risk, while one fitted much higher than recommended captures less steam.
Does a cooker hood need a hole in the wall?
A ducted hood does. The usual route is a core-drilled hole through the nearest outside wall, with rigid ducting from the hood and an external grille sealed into the wall. Where the hob is far from an outside wall, the duct can sometimes run above the wall units or through a ceiling void. A recirculating hood needs no hole, but it removes no moisture.
Should I choose a ducted or a recirculating cooker hood?
A ducted hood is usually more effective, because it takes steam, smoke and smells outside. A recirculating hood passes air through grease and carbon filters and returns it to the room, so it deals with grease and smells but not moisture, and another means of extract is usually needed. Recirculating suits kitchens with no practical duct route, and its carbon filters need replacing.
Nearby places we cover
The same service is available a short drive from Folkestone, including:
- Cooker hood installation in Hythe, Kent
- Cooker hood installation in Dover
- Cooker hood installation in Ashford, Kent
- Cooker hood installation in Deal
- Cooker hood installation in Canterbury
- Cooker hood installation in Faversham
- Cooker hood installation across Kent