Cooker hood installation · Kent
Cooker hood installation in Canterbury
Homeowners and landlords in Canterbury can book us for cooker hood installation: ducted and recirculating cooker hoods fitted, with wall core drilling, ducting and an external grille.
Why cooker hood installation for a Canterbury home?
If condensation runs down the windows of your Canterbury kitchen whenever you cook, the hood may be recirculating, undersized or ducted through a long, flexible run.
If your Canterbury kitchen has an older open-flued boiler, fitting a stronger hood needs care, as it can affect the flue and should be followed by a spillage test. Canterbury sits about 24 miles east of Maidstone, and our Kent coverage takes in everything in between.
What does the job involve?
Here is what usually goes into cooker hood installation, adjusted to your Canterbury kitchen after we have measured it:
- Survey of the hob position, duct route, outside wall and any open-flued appliance
- Hood fixed at the height set by the hood and hob manufacturers
- Power supply connected by an electrician and tested to BS 7671
- Island and ceiling hoods fixed into the ceiling structure by two people
- Recirculating hoods fitted with carbon filters, and their limits explained
- Core drilling through the outside wall and an external grille fitted and sealed
How much does cooker hood installation cost in Canterbury?
As a starting point for Canterbury, these ranges include VAT at 20% and allow for typical labour costs in the South East. Labour in the South East generally costs more than the UK average, which lifts these ranges a little.
| Typical project | Guide price |
|---|---|
| Like-for-like cooker hood swapSame position and ducting | £140–£280 |
| New ducted hood through an outside wallCore drilling, ducting run and external grille | £340–£1,000 |
| Island or ceiling hood installedTwo-person install, fixings to the ceiling structure | £340–£720 |
| Recirculating hood fittedNo ducting; carbon filters need replacing | £140–£340 |
Guide ranges cover fitting and connection with standard ducting through a straightforward wall; long or concealed duct runs, ceiling repairs, new electrical spurs, spillage tests and the hood itself are priced separately. Prices include VAT at 20%.
Kitchens in homes around Canterbury
You will find Victorian terraces, weatherboarded cottages, 1930s semis and oast house conversions throughout Kent. Victorian terraces in the Medway towns and along the coast often have a narrow back-addition kitchen, while 1930s semis usually have a small kitchen beside a separate dining room.
Seaside terraces, permit parking and narrow village lanes can each make deliveries slower, so the route for long worktops is best checked at the survey. Water across Kent is hard, so limescale builds up quickly on taps and boiling water taps, and a scale-reducing filter is worth considering.
Regulations for kitchen work in Canterbury
In England, Approved Document F guidance for kitchen extract is about 30 litres per second from a cooker hood extracting outside, or 60 litres per second from a fan elsewhere in the room. A recirculating hood does not remove moisture, so another means of extract is usually needed. A new vent through the outside wall of a flat may need planning permission and the freeholder's consent, and an open-flued gas appliance in the room calls for a spillage test.
Listed weatherboarded and timber-framed cottages, oast conversions and homes in conservation areas such as historic Canterbury may need consent for new external vents.
Getting the most from your cooker hood installation
- Before choosing a hood for your Canterbury kitchen, find the nearest outside wall to the hob, because the shorter the duct run, the better the extraction.
- Replace the carbon filters in a recirculating hood as often as the manufacturer advises, and clean the grease filters regularly so the hood keeps working well.
- If your Canterbury home is listed, or in a building with strict rules on outside changes, check what is allowed before any hole is cut for a duct.
- Keep the duct run short and straight with rigid ducting, because every bend and extra metre of flexible hose reduces how much air the hood moves.
Questions about cooker hood installation in Canterbury
How much does cooker hood installation cost in Canterbury?
Guide prices in Canterbury are about £140 to £280 including VAT for a like-for-like cooker hood swap. The final price depends on the size of the kitchen and what is moving, and is set out in an itemised written quote.
Do you cover all of Canterbury?
Yes. We work across Canterbury, including the CT1 postcode district, and nearby towns such as Whitstable and Herne Bay. Book a free survey visit and we will arrange a time that suits you.
How high should a cooker hood be above the hob?
At least the minimum distance given by the manufacturers. Both the hood and the hob instructions set a minimum gap between them, and where they differ the greater figure should be used. Gas hobs usually need more clearance than induction. A hood fitted too low is a fire risk, while one fitted much higher than recommended captures less steam.
Can a ducted cooker hood be fitted in a flat?
Often, but check consents first. A new vent through the outside wall of a flat may need planning permission and the freeholder's written consent, and some leases do not allow it at all. Where an outside vent is not possible, a recirculating hood can be fitted, with a separate extract fan or other ventilation dealing with moisture. Listed buildings may also need listed building consent.
Does a cooker hood need a hole in the wall?
A ducted hood does. The usual route is a core-drilled hole through the nearest outside wall, with rigid ducting from the hood and an external grille sealed into the wall. Where the hob is far from an outside wall, the duct can sometimes run above the wall units or through a ceiling void. A recirculating hood needs no hole, but it removes no moisture.
Cooker hood installation in neighbouring towns
The same service is available a short drive from Canterbury, including:
- Cooker hood installation in Whitstable
- Cooker hood installation in Herne Bay
- Cooker hood installation in Faversham
- Cooker hood installation in Ashford, Kent
- Cooker hood installation in Folkestone
- Cooker hood installation in Hythe, Kent
- Cooker hood installation across Kent