Kitchen design and planning in Folkestone

Who usually needs kitchen design and planning in Folkestone?

People in Kent planning an open-plan kitchen-diner often want a layout drawn before their builder starts, so services end up in exactly the right places.

If your Folkestone kitchen is a narrow galley in an older terrace, a measured plan shows whether one run, two runs or moving the door works better. Kitchens in every part of Folkestone are covered, and the survey visit is free wherever you are in Kent.

What does kitchen design and planning in Folkestone include?

The exact scope is agreed after the survey, but a typical job in Folkestone covers:

Positions of water, waste, gas, power and radiators recorded on the plan
Layout options such as galley, L-shaped, U-shaped, island or peninsula
Appliance positions, housings and ventilation gaps checked against real sizes
Socket, switch, lighting and extraction positions marked for the electrician
Working zones planned for preparation, cooking, washing and storage
Measured survey of walls, windows, doors, ceiling height and floor levels

Kitchen design and planning prices in Folkestone

These guide ranges include VAT at 20% and are adjusted for prices in the South East. We confirm your price in writing after a free survey visit. Expect costs in the South East to sit somewhat above UK averages, reflecting local labour rates.

Kitchen design and planning prices in Folkestone
Typical project	Guide price
Design for a kitchen we supplyMeasured survey, layout plan and specification are part of the supply-and-fit price	Included
Measured drawings and layout plan for a kitchen bought elsewhereMeasured drawing, layout and service positions for your fitter and supplier	£340–£1,000
Detailed design with 3D views and elevationsFor larger or open-plan kitchens	£690–£1,700

Design is included in the supply-and-fit price; for kitchens bought elsewhere, the guide prices cover the measured survey, layout drawing and service positions, with 3D views and elevations in the detailed option. The survey visit to quote is free; the fee covers the measured drawings and layout plan you can take to any supplier. Prices include VAT at 20%.

Local homes and their kitchens

You will find Victorian terraces, weatherboarded cottages, 1930s semis and oast house conversions throughout Kent. Victorian terraces in the Medway towns and along the coast often have a narrow back-addition kitchen, while 1930s semis usually have a small kitchen beside a separate dining room.

Water across Kent is hard, so limescale builds up quickly on taps and boiling water taps, and a scale-reducing filter is worth considering. Seaside terraces, permit parking and narrow village lanes can each make deliveries slower, so the route for long worktops is best checked at the survey.

Do you need approval for kitchen design and planning in Folkestone?

Designing and fitting a kitchen needs no planning permission in England, but a good plan allows for the rules that follow. New circuits are notifiable under Part P, a cooker hood extracting outside should achieve about 30 litres per second under Approved Document F, and removing a load-bearing wall needs a structural engineer and building control approval. Listed buildings and flats may need consent before a new outside vent is cut.

Listed weatherboarded and timber-framed cottages, oast conversions and homes in conservation areas such as historic Canterbury may need consent for new external vents.

Getting the most from your kitchen design and planning

Ask for the plan for your Folkestone kitchen to show socket, switch and light positions as well as units, so the electrician can follow it.
Before the survey, list what frustrates you about your current Folkestone kitchen; it is the quickest way to shape a better layout.
Open every cupboard in your current kitchen and decide what you use, what you store and what you could do without before planning storage.
Work out the route for cooker hood ducting to an outside wall before fixing the hob position, as long or bent runs reduce extraction.

Questions about kitchen design and planning in Folkestone

How much does kitchen design and planning cost in Folkestone?

Kitchen design and planning in Folkestone typically costs £340 to £1,000 including VAT for measured drawings and a layout plan for a kitchen bought elsewhere, based on prices in the South East. Larger or more involved jobs cost more, and your price is fixed in writing after a free survey visit.

Do you cover all of Folkestone?

Yes. We work across Folkestone, including the CT19 postcode district, and nearby towns such as Hythe, Kent and Dover. Book a free survey visit and we will arrange a time that suits you.

Which kitchen layout suits my room?

It depends mainly on the shape of the room, where the doors and windows sit and how many people cook. Narrow rooms suit a galley, rooms with a corner suit an L-shape, and wider rooms can take a U-shape. An island needs space for walkways of around a metre on each side, and a peninsula gives similar worktop space where an island will not fit.

What are the standard sizes of kitchen units and worktops?

Base units are typically 600 mm deep, with worktops around 900 mm from the floor, though the plinth height can raise or lower this slightly. Unit widths come in standard steps, commonly from 150 mm up to 1,000 mm, and wall units are shallower, often around 300 to 350 mm deep. A plan built on real measurements uses filler panels to take up any leftover space.

How long does kitchen design take?

Usually one to three weeks from the survey to a final plan, depending on how many layout options you want to compare and how quickly choices about doors, worktops and appliances are made. A replacement in the same layout can be settled quickly, while an open-plan room with an island or moved services often takes a few rounds of changes.

Kitchen design and planning in neighbouring towns

The same service is available a short drive from Folkestone, including: