Cooker hood installation · Kent
Cooker hood installation in Faversham
We take on cooker hood installation in Faversham and the surrounding ME13 postcodes, working to a written scope so you know exactly what is included before anyone starts.
Why do people in Faversham choose cooker hood installation?
Cooks across Kent who fry, grill or stir-fry often find a recirculating hood leaves smells in the house, and look at ducting the air outside instead.
If your Faversham house has thick solid walls, core drilling a neat hole for the duct takes the right equipment and careful positioning of the outside grille. Homes right across Faversham are covered, as are nearby places such as Whitstable, Sittingbourne and the villages in between.
What does cooker hood installation in Faversham include?
Here is what usually goes into cooker hood installation, adjusted to your Faversham kitchen after we have measured it:
- Recirculating hoods fitted with carbon filters, and their limits explained
- Power supply connected by an electrician and tested to BS 7671
- Core drilling through the outside wall and an external grille fitted and sealed
- Hood fixed at the height set by the hood and hob manufacturers
- Island and ceiling hoods fixed into the ceiling structure by two people
- Short, straight runs of rigid ducting wherever the route allows
How much does cooker hood installation cost in Faversham?
These guide ranges include VAT at 20% and are adjusted for prices in the South East. We confirm your price in writing after a free survey visit. Expect costs in the South East to sit somewhat above UK averages, reflecting local labour rates.
| Typical project | Guide price |
|---|---|
| Like-for-like cooker hood swapSame position and ducting | £140–£280 |
| New ducted hood through an outside wallCore drilling, ducting run and external grille | £340–£1,000 |
| Island or ceiling hood installedTwo-person install, fixings to the ceiling structure | £340–£720 |
| Recirculating hood fittedNo ducting; carbon filters need replacing | £140–£340 |
Guide ranges cover fitting and connection with standard ducting through a straightforward wall; long or concealed duct runs, ceiling repairs, new electrical spurs, spillage tests and the hood itself are priced separately. Prices include VAT at 20%.
House types around Faversham and what they mean for a kitchen
Across Kent you will often find Victorian terraces, weatherboarded cottages, 1930s semis and oast house conversions, and each shapes the kitchen differently. Victorian terraces in the Medway towns and along the coast often have a narrow back-addition kitchen, while 1930s semis usually have a small kitchen beside a separate dining room.
Seaside terraces, permit parking and narrow village lanes can each make deliveries slower, so the route for long worktops is best checked at the survey. Water across Kent is hard, so limescale builds up quickly on taps and boiling water taps, and a scale-reducing filter is worth considering.
Building regulations, electrics and gas in Faversham
In England, Approved Document F guidance for kitchen extract is about 30 litres per second from a cooker hood extracting outside, or 60 litres per second from a fan elsewhere in the room. A recirculating hood does not remove moisture, so another means of extract is usually needed. A new vent through the outside wall of a flat may need planning permission and the freeholder's consent, and an open-flued gas appliance in the room calls for a spillage test.
Listed weatherboarded and timber-framed cottages, oast conversions and homes in conservation areas such as historic Canterbury may need consent for new external vents.
Planning ahead
- Choose a hood at least as wide as your hob, and compare its stated extraction rate with the size of the room before you buy.
- Check whether your Faversham home has an open-flued boiler or gas fire, and mention it at the survey so a spillage test can be planned.
- For an island hood in your Faversham kitchen, settle the hood position before the ceiling is boarded, so timber supports can be added in the right place.
- Check the minimum height above the hob in both the hood and hob instructions, and use the greater of the two figures.
Questions about cooker hood installation in Faversham
How much does cooker hood installation cost in Faversham?
For a like-for-like cooker hood swap, budget around £140 to £280 including VAT in Faversham. That reflects typical costs in the South East; we confirm the actual figure in writing once we have measured up.
Can you measure up in Faversham before quoting?
Yes. Every quote starts with a free, no-obligation survey visit to your home in Faversham. We measure the room, check the walls, floor and service positions, then send an itemised written quote.
How high should a cooker hood be above the hob?
At least the minimum distance given by the manufacturers. Both the hood and the hob instructions set a minimum gap between them, and where they differ the greater figure should be used. Gas hobs usually need more clearance than induction. A hood fitted too low is a fire risk, while one fitted much higher than recommended captures less steam.
Why might a cooker hood need a spillage test?
Because a hood pulling air out of a room can draw fumes back down the flue of an open-flued gas appliance, such as some older boilers or gas fires. Where the kitchen, or a room open to it, has one, a Gas Safe registered engineer should carry out a spillage test with the hood running at full speed. Room-sealed boilers are not affected in the same way.
Does a cooker hood need a hole in the wall?
A ducted hood does. The usual route is a core-drilled hole through the nearest outside wall, with rigid ducting from the hood and an external grille sealed into the wall. Where the hob is far from an outside wall, the duct can sometimes run above the wall units or through a ceiling void. A recirculating hood needs no hole, but it removes no moisture.
Also covering nearby towns
Neighbouring towns where we offer cooker hood installation:
- Cooker hood installation in Whitstable
- Cooker hood installation in Sittingbourne
- Cooker hood installation in Canterbury
- Cooker hood installation in Herne Bay
- Cooker hood installation in Ashford, Kent
- Cooker hood installation in Gillingham
- Cooker hood installation across Kent