Cooker hood installation in Exmouth

When does cooker hood installation make sense in Exmouth?

If your Exmouth kitchen has an older open-flued boiler, fitting a stronger hood needs care, as it can affect the flue and should be followed by a spillage test.

Cooks across Devon who fry, grill or stir-fry often find a recirculating hood leaves smells in the house, and look at ducting the air outside instead. We cover all of Exmouth, including the EX8 postcode district, and travel out to neighbouring towns across Devon.

What we cover for cooker hood installation in Exmouth

The exact scope is agreed after the survey, but a typical job in Exmouth covers:

Survey of the hob position, duct route, outside wall and any open-flued appliance
Spillage test by a Gas Safe registered engineer where an open-flued appliance is present
Core drilling through the outside wall and an external grille fitted and sealed
Short, straight runs of rigid ducting wherever the route allows
Recirculating hoods fitted with carbon filters, and their limits explained
Power supply connected by an electrician and tested to BS 7671

What should you budget for cooker hood installation in Exmouth?

These guide ranges include VAT at 20% and are adjusted for prices in the South West. We confirm your price in writing after a free survey visit. For the South West, these ranges are close to the national figures.

What should you budget for cooker hood installation in Exmouth?
Typical project	Guide price
Like-for-like cooker hood swapSame position and ducting	£120–£250
New ducted hood through an outside wallCore drilling, ducting run and external grille	£310–£930
Island or ceiling hood installedTwo-person install, fixings to the ceiling structure	£310–£650
Recirculating hood fittedNo ducting; carbon filters need replacing	£120–£310

Guide ranges cover fitting and connection with standard ducting through a straightforward wall; long or concealed duct runs, ceiling repairs, new electrical spurs, spillage tests and the hood itself are priced separately. Prices include VAT at 20%.

House types around Exmouth and what they mean for a kitchen

Typical homes in this part of Devon include cob and thatched cottages, Victorian terraces, post-war houses and flats and seaside bungalows. Victorian terraces in Exeter and Torbay often have a narrow back kitchen, while post-war houses and seaside bungalows usually have a square room that suits an L-shape.

Much of Devon has soft mains water, which is kind to taps and appliances, though some eastern parts are harder, so check with your supplier. Single-track lanes, steep town streets and cottages with no parking can make deliveries slow, so long worktops and tall units need a planned route into the house.

Building regulations, electrics and gas in Exmouth

In England, Approved Document F guidance for kitchen extract is about 30 litres per second from a cooker hood extracting outside, or 60 litres per second from a fan elsewhere in the room. A recirculating hood does not remove moisture, so another means of extract is usually needed. A new vent through the outside wall of a flat may need planning permission and the freeholder's consent, and an open-flued gas appliance in the room calls for a spillage test.

Homes within Dartmoor or Exmoor national parks, listed thatched cottages and conservation areas may need consent before a new extractor vent goes through an outside wall.

Before you book cooker hood installation in Exmouth

If you live in a flat in Devon, ask the freeholder, factor or managing agent about outside vents before you buy a ducted hood.
If your Exmouth home is listed, or in a building with strict rules on outside changes, check what is allowed before any hole is cut for a duct.
Ask for rigid ducting rather than flexible hose wherever the route allows, as it moves more air, gathers less grease and is usually quieter.
If the kitchen has an open-flued boiler or gas fire, a Gas Safe registered engineer should carry out a spillage test after the hood is fitted.

Questions about cooker hood installation in Exmouth

How much does cooker hood installation cost in Exmouth?

For a like-for-like cooker hood swap, budget around £120 to £250 including VAT in Exmouth. That reflects typical costs in the South West; we confirm the actual figure in writing once we have measured up.

Do you work near Exmouth as well?

Yes. As well as Exmouth itself, we cover the rest of Devon and nearby towns such as Exeter and Newton Abbot. The process is the same wherever the kitchen is.

Why might a cooker hood need a spillage test?

Because a hood pulling air out of a room can draw fumes back down the flue of an open-flued gas appliance, such as some older boilers or gas fires. Where the kitchen, or a room open to it, has one, a Gas Safe registered engineer should carry out a spillage test with the hood running at full speed. Room-sealed boilers are not affected in the same way.

Does a cooker hood need a hole in the wall?

A ducted hood does. The usual route is a core-drilled hole through the nearest outside wall, with rigid ducting from the hood and an external grille sealed into the wall. Where the hob is far from an outside wall, the duct can sometimes run above the wall units or through a ceiling void. A recirculating hood needs no hole, but it removes no moisture.

How high should a cooker hood be above the hob?

At least the minimum distance given by the manufacturers. Both the hood and the hob instructions set a minimum gap between them, and where they differ the greater figure should be used. Gas hobs usually need more clearance than induction. A hood fitted too low is a fire risk, while one fitted much higher than recommended captures less steam.

Nearby places we cover

The same service is available a short drive from Exmouth, including: