Cooker hood installation in Newton Abbot

When does cooker hood installation make sense in Newton Abbot?

A new kitchen in a Newton Abbot home can move the hob away from the old vent, so the hood, the duct run and the wall grille all need rethinking together.

Homeowners in Newton Abbot adding a hob to a new island often need a ceiling hood with solid fixings and a duct route planned before the ceiling is closed up. Newton Abbot sits about 26 miles north-east of Plymouth, and our Devon coverage takes in everything in between.

What is in a typical job?

The exact scope is agreed after the survey, but a typical job in Newton Abbot covers:

Power supply connected by an electrician and tested to BS 7671
Recirculating hoods fitted with carbon filters, and their limits explained
Short, straight runs of rigid ducting wherever the route allows
Spillage test by a Gas Safe registered engineer where an open-flued appliance is present
Island and ceiling hoods fixed into the ceiling structure by two people
Core drilling through the outside wall and an external grille fitted and sealed

What does cooker hood installation cost in Newton Abbot?

These guide ranges include VAT at 20% and are adjusted for prices in the South West. We confirm your price in writing after a free survey visit. Costs in the South West sit close to the national guide.

What does cooker hood installation cost in Newton Abbot?
Typical project	Guide price
Like-for-like cooker hood swapSame position and ducting	£120–£250
New ducted hood through an outside wallCore drilling, ducting run and external grille	£310–£930
Island or ceiling hood installedTwo-person install, fixings to the ceiling structure	£310–£650
Recirculating hood fittedNo ducting; carbon filters need replacing	£120–£310

Guide ranges cover fitting and connection with standard ducting through a straightforward wall; long or concealed duct runs, ceiling repairs, new electrical spurs, spillage tests and the hood itself are priced separately. Prices include VAT at 20%.

What kind of kitchens do we fit in Newton Abbot?

You will find cob and thatched cottages, Victorian terraces, post-war houses and flats and seaside bungalows throughout Devon. Victorian terraces in Exeter and Torbay often have a narrow back kitchen, while post-war houses and seaside bungalows usually have a square room that suits an L-shape.

Much of Devon has soft mains water, which is kind to taps and appliances, though some eastern parts are harder, so check with your supplier. Single-track lanes, steep town streets and cottages with no parking can make deliveries slow, so long worktops and tall units need a planned route into the house.

Building regulations, electrics and gas in Newton Abbot

In England, Approved Document F guidance for kitchen extract is about 30 litres per second from a cooker hood extracting outside, or 60 litres per second from a fan elsewhere in the room. A recirculating hood does not remove moisture, so another means of extract is usually needed. A new vent through the outside wall of a flat may need planning permission and the freeholder's consent, and an open-flued gas appliance in the room calls for a spillage test.

Homes within Dartmoor or Exmoor national parks, listed thatched cottages and conservation areas may need consent before a new extractor vent goes through an outside wall.

Getting the most from your cooker hood installation

Ask for rigid ducting rather than flexible hose wherever the route allows, as it moves more air, gathers less grease and is usually quieter.
If your Newton Abbot home is listed, or in a building with strict rules on outside changes, check what is allowed before any hole is cut for a duct.
Choose a hood at least as wide as your hob, and compare its stated extraction rate with the size of the room before you buy.
For an island or ceiling hood, find out what is above the ceiling, as joists or added timbers are needed to carry the weight securely.

Questions about cooker hood installation in Newton Abbot

How much does cooker hood installation cost in Newton Abbot?

Cooker hood installation in Newton Abbot typically costs £120 to £250 including VAT for a like-for-like cooker hood swap, based on prices in the South West. Larger or more involved jobs cost more, and your price is fixed in writing after a free survey visit.

Which parts of Newton Abbot do you work in?

All of them. Our Devon coverage takes in the whole of Newton Abbot, including the TQ12 postcode district, as well as surrounding towns such as Torquay. If you are unsure, send us your postcode.

Does a cooker hood need a hole in the wall?

A ducted hood does. The usual route is a core-drilled hole through the nearest outside wall, with rigid ducting from the hood and an external grille sealed into the wall. Where the hob is far from an outside wall, the duct can sometimes run above the wall units or through a ceiling void. A recirculating hood needs no hole, but it removes no moisture.

Can a ducted cooker hood be fitted in a flat?

Often, but check consents first. A new vent through the outside wall of a flat may need planning permission and the freeholder's written consent, and some leases do not allow it at all. Where an outside vent is not possible, a recirculating hood can be fitted, with a separate extract fan or other ventilation dealing with moisture. Listed buildings may also need listed building consent.

How high should a cooker hood be above the hob?

At least the minimum distance given by the manufacturers. Both the hood and the hob instructions set a minimum gap between them, and where they differ the greater figure should be used. Gas hobs usually need more clearance than induction. A hood fitted too low is a fire risk, while one fitted much higher than recommended captures less steam.

Cooker hood installation near Newton Abbot

The same service is available a short drive from Newton Abbot, including: