Cooker hood installation in Honiton

What prompts cooker hood installation in Honiton?

If condensation runs down the windows of your Honiton kitchen whenever you cook, the hood may be recirculating, undersized or ducted through a long, flexible run.

If your Honiton house has thick solid walls, core drilling a neat hole for the duct takes the right equipment and careful positioning of the outside grille. We work throughout Honiton (EX14) and across the wider Devon area.

What is included in the work?

Your written quote lists everything included. For cooker hood installation, that normally means:

Island and ceiling hoods fixed into the ceiling structure by two people
Hood fixed at the height set by the hood and hob manufacturers
Core drilling through the outside wall and an external grille fitted and sealed
Short, straight runs of rigid ducting wherever the route allows
Power supply connected by an electrician and tested to BS 7671
Recirculating hoods fitted with carbon filters, and their limits explained

What does cooker hood installation cost in Honiton?

The figures below are guide prices for Honiton, including VAT and adjusted for typical costs across the South West. The fixed price comes after we have measured up. Costs in the South West sit close to the national guide.

What does cooker hood installation cost in Honiton?
Typical project	Guide price
Like-for-like cooker hood swapSame position and ducting	£120–£250
New ducted hood through an outside wallCore drilling, ducting run and external grille	£310–£930
Island or ceiling hood installedTwo-person install, fixings to the ceiling structure	£310–£650
Recirculating hood fittedNo ducting; carbon filters need replacing	£120–£310

Guide ranges cover fitting and connection with standard ducting through a straightforward wall; long or concealed duct runs, ceiling repairs, new electrical spurs, spillage tests and the hood itself are priced separately. Prices include VAT at 20%.

Kitchens in homes around Honiton

Across Devon you will often find cob and thatched cottages, Victorian terraces, post-war houses and flats and seaside bungalows, and each shapes the kitchen differently. Victorian terraces in Exeter and Torbay often have a narrow back kitchen, while post-war houses and seaside bungalows usually have a square room that suits an L-shape.

Much of Devon has soft mains water, which is kind to taps and appliances, though some eastern parts are harder, so check with your supplier. Single-track lanes, steep town streets and cottages with no parking can make deliveries slow, so long worktops and tall units need a planned route into the house.

Building regulations, electrics and gas in Honiton

In England, Approved Document F guidance for kitchen extract is about 30 litres per second from a cooker hood extracting outside, or 60 litres per second from a fan elsewhere in the room. A recirculating hood does not remove moisture, so another means of extract is usually needed. A new vent through the outside wall of a flat may need planning permission and the freeholder's consent, and an open-flued gas appliance in the room calls for a spillage test.

Homes within Dartmoor or Exmoor national parks, listed thatched cottages and conservation areas may need consent before a new extractor vent goes through an outside wall.

Practical advice for Honiton homeowners

Replace the carbon filters in a recirculating hood as often as the manufacturer advises, and clean the grease filters regularly so the hood keeps working well.
If your Honiton home is listed, or in a building with strict rules on outside changes, check what is allowed before any hole is cut for a duct.
Check whether your Honiton home has an open-flued boiler or gas fire, and mention it at the survey so a spillage test can be planned.
Check the minimum height above the hob in both the hood and hob instructions, and use the greater of the two figures.

Questions about cooker hood installation in Honiton

How much does cooker hood installation cost in Honiton?

Cooker hood installation in Honiton typically costs £120 to £250 including VAT for a like-for-like cooker hood swap, based on prices in the South West. Larger or more involved jobs cost more, and your price is fixed in writing after a free survey visit.

Do you work near Honiton as well?

Yes. As well as Honiton itself, we cover the rest of Devon and nearby towns such as Chard and Tiverton. The process is the same wherever the kitchen is.

Can a ducted cooker hood be fitted in a flat?

Often, but check consents first. A new vent through the outside wall of a flat may need planning permission and the freeholder's written consent, and some leases do not allow it at all. Where an outside vent is not possible, a recirculating hood can be fitted, with a separate extract fan or other ventilation dealing with moisture. Listed buildings may also need listed building consent.

How high should a cooker hood be above the hob?

At least the minimum distance given by the manufacturers. Both the hood and the hob instructions set a minimum gap between them, and where they differ the greater figure should be used. Gas hobs usually need more clearance than induction. A hood fitted too low is a fire risk, while one fitted much higher than recommended captures less steam.

Why might a cooker hood need a spillage test?

Because a hood pulling air out of a room can draw fumes back down the flue of an open-flued gas appliance, such as some older boilers or gas fires. Where the kitchen, or a room open to it, has one, a Gas Safe registered engineer should carry out a spillage test with the hood running at full speed. Room-sealed boilers are not affected in the same way.

Nearby places we cover

We also carry out cooker hood installation in these towns near Honiton: