Cooker hood installation in Torquay

Why do people in Torquay choose cooker hood installation?

If your Torquay kitchen has an older open-flued boiler, fitting a stronger hood needs care, as it can affect the flue and should be followed by a spillage test.

If your Torquay house has thick solid walls, core drilling a neat hole for the duct takes the right equipment and careful positioning of the outside grille. Torquay sits about 28 miles east of Plymouth, and our Devon coverage takes in everything in between.

What does cooker hood installation in Torquay include?

Here is what usually goes into cooker hood installation, adjusted to your Torquay kitchen after we have measured it:

Power supply connected by an electrician and tested to BS 7671
Island and ceiling hoods fixed into the ceiling structure by two people
Survey of the hob position, duct route, outside wall and any open-flued appliance
Hood fixed at the height set by the hood and hob manufacturers
Core drilling through the outside wall and an external grille fitted and sealed
Short, straight runs of rigid ducting wherever the route allows

What does cooker hood installation cost in Torquay?

Use these ranges to plan your budget. They include VAT, reflect costs in the South West, and are firmed up once we have seen your Torquay kitchen. Prices across the South West are broadly in line with UK averages.

What does cooker hood installation cost in Torquay?
Typical project	Guide price
Like-for-like cooker hood swapSame position and ducting	£120–£250
New ducted hood through an outside wallCore drilling, ducting run and external grille	£310–£930
Island or ceiling hood installedTwo-person install, fixings to the ceiling structure	£310–£650
Recirculating hood fittedNo ducting; carbon filters need replacing	£120–£310

Guide ranges cover fitting and connection with standard ducting through a straightforward wall; long or concealed duct runs, ceiling repairs, new electrical spurs, spillage tests and the hood itself are priced separately. Prices include VAT at 20%.

Kitchens in homes around Torquay

You will find cob and thatched cottages, Victorian terraces, post-war houses and flats and seaside bungalows throughout Devon. Victorian terraces in Exeter and Torbay often have a narrow back kitchen, while post-war houses and seaside bungalows usually have a square room that suits an L-shape.

Single-track lanes, steep town streets and cottages with no parking can make deliveries slow, so long worktops and tall units need a planned route into the house. Much of Devon has soft mains water, which is kind to taps and appliances, though some eastern parts are harder, so check with your supplier.

Regulations for kitchen work in Torquay

In England, Approved Document F guidance for kitchen extract is about 30 litres per second from a cooker hood extracting outside, or 60 litres per second from a fan elsewhere in the room. A recirculating hood does not remove moisture, so another means of extract is usually needed. A new vent through the outside wall of a flat may need planning permission and the freeholder's consent, and an open-flued gas appliance in the room calls for a spillage test.

Homes within Dartmoor or Exmoor national parks, listed thatched cottages and conservation areas may need consent before a new extractor vent goes through an outside wall.

Planning ahead

If you live in a flat in Devon, ask the freeholder, factor or managing agent about outside vents before you buy a ducted hood.
Check whether your Torquay home has an open-flued boiler or gas fire, and mention it at the survey so a spillage test can be planned.
Choose a hood at least as wide as your hob, and compare its stated extraction rate with the size of the room before you buy.
For an island or ceiling hood, find out what is above the ceiling, as joists or added timbers are needed to carry the weight securely.

Questions about cooker hood installation in Torquay

How much does cooker hood installation cost in Torquay?

For a like-for-like cooker hood swap, budget around £120 to £250 including VAT in Torquay. That reflects typical costs in the South West; we confirm the actual figure in writing once we have measured up.

Which parts of Torquay do you work in?

All of them. Our Devon coverage takes in the whole of Torquay, including the TQ2 postcode district, as well as surrounding towns such as Paignton. If you are unsure, send us your postcode.

Can a ducted cooker hood be fitted in a flat?

Often, but check consents first. A new vent through the outside wall of a flat may need planning permission and the freeholder's written consent, and some leases do not allow it at all. Where an outside vent is not possible, a recirculating hood can be fitted, with a separate extract fan or other ventilation dealing with moisture. Listed buildings may also need listed building consent.

Does a cooker hood need a hole in the wall?

A ducted hood does. The usual route is a core-drilled hole through the nearest outside wall, with rigid ducting from the hood and an external grille sealed into the wall. Where the hob is far from an outside wall, the duct can sometimes run above the wall units or through a ceiling void. A recirculating hood needs no hole, but it removes no moisture.

How high should a cooker hood be above the hob?

At least the minimum distance given by the manufacturers. Both the hood and the hob instructions set a minimum gap between them, and where they differ the greater figure should be used. Gas hobs usually need more clearance than induction. A hood fitted too low is a fire risk, while one fitted much higher than recommended captures less steam.

Cooker hood installation in neighbouring towns

Close to Torquay? We cover these nearby towns too: