Cooker hood installation in Crewe

What prompts cooker hood installation in Crewe?

If your Crewe house has thick solid walls, core drilling a neat hole for the duct takes the right equipment and careful positioning of the outside grille.

If condensation runs down the windows of your Crewe kitchen whenever you cook, the hood may be recirculating, undersized or ducted through a long, flexible run. If your home is in Crewe or close by in Nantwich or Sandbach, the same survey, quote and fitting process applies.

What does cooker hood installation in Crewe include?

The exact scope is agreed after the survey, but a typical job in Crewe covers:

Hood fixed at the height set by the hood and hob manufacturers
Short, straight runs of rigid ducting wherever the route allows
Power supply connected by an electrician and tested to BS 7671
Survey of the hob position, duct route, outside wall and any open-flued appliance
Island and ceiling hoods fixed into the ceiling structure by two people
Core drilling through the outside wall and an external grille fitted and sealed

What does cooker hood installation cost in Crewe?

The figures below are guide prices for Crewe, including VAT and adjusted for typical costs across the North West. The fixed price comes after we have measured up. Prices in the North West usually come in below the national guide, as labour rates are lower than in the South East.

What does cooker hood installation cost in Crewe?
Typical project	Guide price
Like-for-like cooker hood swapSame position and ducting	£110–£230
New ducted hood through an outside wallCore drilling, ducting run and external grille	£280–£860
Island or ceiling hood installedTwo-person install, fixings to the ceiling structure	£280–£600
Recirculating hood fittedNo ducting; carbon filters need replacing	£110–£280

Guide ranges cover fitting and connection with standard ducting through a straightforward wall; long or concealed duct runs, ceiling repairs, new electrical spurs, spillage tests and the hood itself are priced separately. Prices include VAT at 20%.

Kitchens in homes around Crewe

You will find Victorian terraces, 1930s semis, new-build estates and period farmhouses and cottages throughout Cheshire. Terraces in towns such as Crewe and Warrington often have a back-addition galley, while 1930s semis usually have a small kitchen that can be opened into a dining room.

Hardness varies across Cheshire, from fairly soft in some places to moderately hard in others, so check with your supplier before choosing a filter or boiling water tap. Rural lanes and long farm drives can be awkward for delivery vans, and terraced streets in older town centres may have limited parking close to the door.

What rules apply to cooker hood installation in Crewe?

In England, Approved Document F guidance for kitchen extract is about 30 litres per second from a cooker hood extracting outside, or 60 litres per second from a fan elsewhere in the room. A recirculating hood does not remove moisture, so another means of extract is usually needed. A new vent through the outside wall of a flat may need planning permission and the freeholder's consent, and an open-flued gas appliance in the room calls for a spillage test.

Listed timber-framed buildings, homes in conservation areas such as central Chester and the Cheshire fringe of the Peak District National Park may need consent for new vents.

Planning ahead

For an island hood in your Crewe kitchen, settle the hood position before the ceiling is boarded, so timber supports can be added in the right place.
Ask for rigid ducting rather than flexible hose wherever the route allows, as it moves more air, gathers less grease and is usually quieter.
If your Crewe home is listed, or in a building with strict rules on outside changes, check what is allowed before any hole is cut for a duct.
Choose ducted extraction where you can; a recirculating hood filters grease and smells but leaves the moisture from cooking in the room.

Questions about cooker hood installation in Crewe

How much does cooker hood installation cost in Crewe?

For a like-for-like cooker hood swap, budget around £110 to £230 including VAT in Crewe. That reflects typical costs in the North West; we confirm the actual figure in writing once we have measured up.

Do you cover all of Crewe?

Yes. We work across Crewe, including the CW1 postcode district, and nearby towns such as Nantwich and Sandbach. Book a free survey visit and we will arrange a time that suits you.

Why might a cooker hood need a spillage test?

Because a hood pulling air out of a room can draw fumes back down the flue of an open-flued gas appliance, such as some older boilers or gas fires. Where the kitchen, or a room open to it, has one, a Gas Safe registered engineer should carry out a spillage test with the hood running at full speed. Room-sealed boilers are not affected in the same way.

Should I choose a ducted or a recirculating cooker hood?

A ducted hood is usually more effective, because it takes steam, smoke and smells outside. A recirculating hood passes air through grease and carbon filters and returns it to the room, so it deals with grease and smells but not moisture, and another means of extract is usually needed. Recirculating suits kitchens with no practical duct route, and its carbon filters need replacing.

Can a ducted cooker hood be fitted in a flat?

Often, but check consents first. A new vent through the outside wall of a flat may need planning permission and the freeholder's written consent, and some leases do not allow it at all. Where an outside vent is not possible, a recirculating hood can be fitted, with a separate extract fan or other ventilation dealing with moisture. Listed buildings may also need listed building consent.

Cooker hood installation in neighbouring towns

We also carry out cooker hood installation in these towns near Crewe: