Kitchen worktop fitting in Crewe

Why do people in Crewe choose kitchen worktop fitting?

If your Cheshire kitchen still has a dated tiled or laminate surface, new worktops often go in with a new sink, tap and splashback at the same time.

Some homeowners across Cheshire have already ordered stone worktops from a supplier and need someone to fix and level the base units so templating can go ahead. Homes right across Crewe are covered, as are nearby places such as Nantwich, Sandbach and the villages in between.

What is in a typical job?

The exact scope is agreed after the survey, but a typical job in Crewe covers:

Sink, tap and hob reconnected, with gas hobs connected by Gas Safe registered engineers
Matching upstands fitted and the joint to the wall sealed
Quartz, granite or sintered stone templated once the base units are fixed and level
Undermount sink and hob cut-outs cut and finished by the stone fabricator
Old worktops removed and taken away, with the sink and hob disconnected safely
Free survey visit to measure the runs and check the base units are level

What does kitchen worktop fitting cost in Crewe?

The figures below are guide prices for Crewe, including VAT and adjusted for typical costs across the North West. The fixed price comes after we have measured up. Prices in the North West usually come in below the national guide, as labour rates are lower than in the South East.

What does kitchen worktop fitting cost in Crewe?
Typical project	Guide price
Laminate worktops, supplied and fittedTypical kitchen, joints, cut-outs and upstands	£480–£1,100
Solid wood worktops, supplied and fittedOiled before and after fitting	£860–£1,700
Granite, templated and fittedTemplate visit, cutting, delivery and fitting	£1,400–£3,000
Quartz, templated and fittedTemplate visit, cutting, delivery and fitting	£1,700–£3,300
Old worktops removed and taken awayMore for stone	£80–£240

Guide ranges are for a typical kitchen and include the worktops, cut-outs, upstands and fitting; removing old tops is a separate line, and new sinks, taps and splashbacks are priced on top. Prices include VAT at 20%.

Kitchens in homes around Crewe

Across Cheshire you will often find Victorian terraces, 1930s semis, new-build estates and period farmhouses and cottages, and each shapes the kitchen differently. Terraces in towns such as Crewe and Warrington often have a back-addition galley, while 1930s semis usually have a small kitchen that can be opened into a dining room.

Rural lanes and long farm drives can be awkward for delivery vans, and terraced streets in older town centres may have limited parking close to the door. Hardness varies across Cheshire, from fairly soft in some places to moderately hard in others, so check with your supplier before choosing a filter or boiling water tap.

Do you need approval for kitchen worktop fitting in Crewe?

New worktops need no planning permission or Building Regulations approval in England. Disconnecting and reconnecting a gas hob must be done by a Gas Safe registered engineer, and an electric hob or oven goes back on its existing circuit. Moving or adding sockets above the worktop on an existing kitchen circuit is not notifiable, but it must meet BS 7671. In a listed building, check before removing any original fitted joinery.

Listed timber-framed buildings, homes in conservation areas such as central Chester and the Cheshire fringe of the Peak District National Park may need consent for new vents.

Tips before you start

Clear the worktops and the cupboards beneath them before fitting day, as the old tops and the sink need space to come out.
For a Crewe kitchen with stone worktops, ask whether the upstands will be cut from the same slab so the colour and pattern match.
If your Crewe kitchen has a gas hob, a Gas Safe registered engineer needs to disconnect it before the old worktops come off.
Stone worktops are templated only once the base units are fixed and level, so allow one to two weeks between fitting and finishing.

Questions about kitchen worktop fitting in Crewe

How much does kitchen worktop fitting cost in Crewe?

For laminate worktops, supplied and fitted, budget around £480 to £1,100 including VAT in Crewe. That reflects typical costs in the North West; we confirm the actual figure in writing once we have measured up.

Which parts of Crewe do you work in?

All of them. Our Cheshire coverage takes in the whole of Crewe, including the CW1 postcode district, as well as surrounding towns such as Nantwich. If you are unsure, send us your postcode.

How do I look after a solid wood worktop?

Oil it regularly and keep it away from standing water. Wood is oiled on every face before fitting and given further coats once in place, then re-oiled more often in the first months. Wipe up round the sink and tap, and do not leave wet cloths or a dripping kettle on it. It is fixed with slotted brackets so it can expand and shrink with the seasons without cracking.

How are laminate worktops joined at corners?

With either a mason's mitre or a joint strip. A mason's mitre is routed with a jig so the front edge profile turns the corner, then glued, sealed and pulled tight with connector bolts underneath. A joint strip is a metal or colour-matched profile fixed and sealed between the two lengths. Either way, every cut edge, including the sink and hob cut-outs, is sealed so water cannot swell the core.

Can I put hot pans on a quartz worktop?

It is safer not to. Quartz contains resin that can discolour or crack under sudden heat, so pans straight from the hob or oven should go on a trivet or pan stand. Granite copes better with heat but can still be marked or cracked by intense heat in one spot, and laminate and wood scorch easily. A trivet kept next to the hob protects any worktop.

Kitchen worktop fitting in neighbouring towns

Neighbouring towns where we offer kitchen worktop fitting: