Kitchen strip-out and removal in Crewe

Is kitchen strip-out and removal right for your Crewe kitchen?

People clearing a house in Cheshire before a refurbishment, sale or letting often need the kitchen removed quickly, with services made safe so the property is left in a sound state.

If a leak has ruined the base units in your Crewe kitchen, a careful strip-out lets the floor and walls dry out and be checked before anything new goes in. Homes right across Crewe are covered, as are nearby places such as Nantwich, Sandbach and the villages in between.

What is included in the work?

After the survey visit we write the scope down. For kitchen strip-out and removal in Crewe it usually covers:

Old tiles stripped and walls prepared for plaster, where that is agreed
Survey of gas, electrical and water positions and the route out of the house
Floors, doorways, stairs and the route to the skip or van protected
Gas supply disconnected and capped by a Gas Safe registered engineer
Water isolated and supplies capped so the rest of the house keeps running water
Kitchen circuits isolated and made safe by an electrician

Guide prices for kitchen strip-out and removal in Crewe

These guide ranges include VAT at 20% and are adjusted for prices in the North West. We confirm your price in writing after a free survey visit. Prices in the North West usually come in below the national guide, as labour rates are lower than in the South East.

Guide prices for kitchen strip-out and removal in Crewe
Typical project	Guide price
Old kitchen removed and disposed ofUnits, worktops and appliances, including skip hire	£190–£480
Removal with services made safeGas capped by a Gas Safe engineer, circuits made safe by an electrician	£280–£660
Strip-out back to bare wallsOld tiles removed and walls prepared for plaster	£480–£1,100

Guide ranges include labour, protection, waste removal or skip hire and, where listed, making services safe; asbestos testing or removal and replastering are priced separately. Prices include VAT at 20%.

Fitting kitchens in older and newer Crewe homes

Typical homes in this part of Cheshire include Victorian terraces, 1930s semis, new-build estates and period farmhouses and cottages. Terraces in towns such as Crewe and Warrington often have a back-addition galley, while 1930s semis usually have a small kitchen that can be opened into a dining room.

Hardness varies across Cheshire, from fairly soft in some places to moderately hard in others, so check with your supplier before choosing a filter or boiling water tap. Rural lanes and long farm drives can be awkward for delivery vans, and terraced streets in older town centres may have limited parking close to the door.

Regulations for kitchen work in Crewe

Removing a kitchen needs no planning permission in England, but a listed home may need listed building consent before historic fittings are taken out. Only a Gas Safe registered engineer may disconnect and cap a gas supply, and circuits should be made safe by an electrician to BS 7671. A skip on the road usually needs a council permit, which the skip firm normally arranges, and waste should go with a carrier registered with the Environment Agency.

Listed timber-framed buildings, homes in conservation areas such as central Chester and the Cheshire fringe of the Peak District National Park may need consent for new vents.

Getting the most from your kitchen strip-out and removal

If you plan to sell or reuse appliances or units, say so at the survey so they are removed carefully and set aside rather than broken up.
Measure the hallway and doors on the route out; long worktops and tall larder units sometimes need cutting down to leave the house without damaging walls.
Set up a kettle and microwave in another room of your home in Cheshire, as the kitchen will have no power once the circuits are made safe.
Decide what is being kept, such as a working oven or units for a garage, and label it clearly before the strip-out day.

Questions about kitchen strip-out and removal in Crewe

How much does kitchen strip-out and removal cost in Crewe?

Kitchen strip-out and removal in Crewe typically costs £190 to £480 including VAT for removing and disposing of an old kitchen, based on prices in the North West. Larger or more involved jobs cost more, and your price is fixed in writing after a free survey visit.

Can you measure up in Crewe before quoting?

Yes. Every quote starts with a free, no-obligation survey visit to your home in Crewe. We measure the room, check the walls, floor and service positions, then send an itemised written quote.

Where does the old kitchen go after it is removed?

Into licensed waste routes. Units, worktops and packaging go by skip or van with a registered waste carrier to permitted sites, and old appliances go for recycling, which matters most for fridges and freezers because their gases need specialist treatment. Anything you want to keep or sell, such as a working oven, is set aside before the strip-out starts.

Can you strip out a kitchen for another fitter or builder?

Yes. We can take out the old kitchen on its own and leave the room ready, with gas capped, circuits made safe and water isolated, so your builder or fitter starts with a clear space. Tell us at the survey what condition the walls and floor should be left in, because stripping back to bare walls is a bigger job than removing units.

Do I need a skip for a kitchen strip-out?

Not always. A small kitchen can often go in a van in one or two trips, while a larger strip-out with tiles and plaster usually needs a skip. A skip on your drive needs no permit, but one on the road usually needs a permit from the council or roads authority, which the skip firm normally arranges. We agree the method at the survey.

Also covering nearby towns

We also carry out kitchen strip-out and removal in these towns near Crewe: