Kitchen Installers UK

Utility room fitting · Hampshire

Utility room fitting in Waterlooville

Looking for utility room fitting in Waterlooville? We survey, quote and carry out utility room fitting for homes across Waterlooville and the rest of Hampshire, with one contract from the first measure to the final check.

Guide price£460 to £8,000
Postcodes includePO7
Timescale1 to 3 days on site
A utility room with a stacked washing machine and dryer, a small sink, a tall cupboard and a laminate worktop

Why do people in Waterlooville choose utility room fitting?

In a Waterlooville house where the garage is already used for storage rather than the car, some people fit a run of units and the laundry along one wall.

Landlords letting larger family homes across Hampshire sometimes add a utility so tenants have room for laundry, coats and cleaning kit without filling the kitchen with appliances. If your home is in Waterlooville or close by in Havant or Emsworth, the same survey, quote and fitting process applies.

What does utility room fitting in Waterlooville include?

Every kitchen is different, so we confirm the scope in writing. Most jobs of this kind include:

  • Utility sink and tap plumbed in, with new supplies and waste where none exist
  • A vent to outside for a vented dryer, or a drain hose for condenser models
  • Extract fan fitted to clear moisture from washing and drying
  • Worktop over the washing machine and dryer, supported clear of the appliances
  • Free survey visit to check water, waste, power and outside wall positions
  • Washing machine supply, waste and isolation valve, tested for leaks

What does utility room fitting cost in Waterlooville?

These guide ranges include VAT at 20% and are adjusted for prices in the South East. We confirm your price in writing after a free survey visit. Labour in the South East generally costs more than the UK average, which lifts these ranges a little.

What does utility room fitting cost in Waterlooville?
Typical projectGuide price
Utility units and worktop fitted (fit only)Three to six units, laminate worktop, panels£1,400–£3,400
Utility room supplied and fittedUnits, worktop, sink, washer and dryer connections£3,400–£8,000
New utility plumbing for a sink and washing machineSupplies, waste and valves where none exist£460–£1,200

Fit-only and supply-and-fit ranges cover units, worktop and standard sink and appliance connections, with new plumbing where none exists as a separate line; extract fans, dryer vents and new circuits are quoted on top. Prices include VAT at 20%.

Kitchens in homes around Waterlooville

The housing mix across Hampshire includes Victorian terraces, 1930s semis, post-war estate houses and thatched and brick cottages, so no two kitchen fits are quite alike. Terraces in Southampton and Portsmouth often have a narrow back kitchen, while post-war estate houses tend to have a compact rectangular room suited to an L-shape.

Dense terraced streets can be very tight for parking, and New Forest lanes and village roads may limit the size of delivery vehicle. Water across Hampshire is mostly hard, largely from chalk sources, so limescale on taps and boiling water taps is common and a filter can help.

Do you need approval for utility room fitting in Waterlooville?

Fitting a utility room needs no planning permission in England, though a new dryer vent through the outside wall of a flat may need planning permission and the freeholder's consent. Adding sockets to an existing circuit is not notifiable, but a new circuit is, under Part P. Approved Document F sets an extract rate of about 30 litres per second for a utility room, so a new fan should be sized to meet it, and if an open-flued boiler shares the room, a Gas Safe registered engineer should carry out a spillage test once a fan is fitted.

Homes within the New Forest or South Downs national parks, listed cottages and conservation areas may need consent for a new extractor vent or alterations to historic features.

Planning ahead

  • Before choosing a dryer for your Waterlooville utility, check whether there is an outside wall close enough for a short, straight vent duct.
  • Ask for an isolation valve on the washing machine supply that can be reached without pulling the machine out from under the worktop.
  • If your Hampshire home has an open-flued boiler in the utility, ask for a spillage test by a Gas Safe registered engineer once an extract fan goes in.
  • Under-stairs spaces can take a washer and dryer, but check the headroom, the ventilation and room to pull machines out before committing.

Questions about utility room fitting in Waterlooville

How much does utility room fitting cost in Waterlooville?

Utility room fitting in Waterlooville typically costs £1,400 to £3,400 including VAT for fitting three to six utility units and a worktop you have bought, based on prices in the South East. Larger or more involved jobs cost more, and your price is fixed in writing after a free survey visit.

Do you cover all of Waterlooville?

Yes. We work across Waterlooville, including the PO7 postcode district, and nearby towns such as Havant and Emsworth. Book a free survey visit and we will arrange a time that suits you.

Does a condenser or heat pump dryer need an outside vent?

No. Condenser and heat pump dryers do not need an outside vent, so they can go where a vented dryer cannot. They collect water in a container that has to be emptied, or they can be connected to the waste so they drain automatically, which is easy when the dryer sits beside the washing machine. They still give off some warmth, so the space needs air around it. A vented dryer needs a duct to an outside wall.

Can a utility room go in a garage or under the stairs?

Often, yes, as long as the space already exists and is usable. In a garage it needs to be dry and protected from frost, with power and a route for water and waste. Under the stairs, check the headroom, the ventilation and whether a door can open fully. We fit units and connect appliances in existing spaces; converting a garage into a habitable room is a separate building project.

Does a utility room need an extractor fan?

Yes, in most cases. Washing and drying put a lot of moisture into a small space, so extract ventilation is strongly advised: Approved Document F sets a rate of about 30 litres per second for utility rooms in England and Wales, and the building standards in Scotland and Technical Booklet K in Northern Ireland cover ventilation too. An extract fan ducted outside is the usual answer, with a window helping but not replacing it. A vented dryer needs its own duct as well.

Utility room fitting in neighbouring towns

Close to Waterlooville? We cover these nearby towns too:

Planning more than one job in Waterlooville?

Free survey visit

Book a free survey visit in Waterlooville

We measure up, check walls, floors and service positions, and send an itemised written quote. Or get a guide price online in about two minutes.

Book a free survey visit

Tell us about the kitchen and the work. We will call to arrange a visit.

We use your details only to arrange your visit and quote. See our privacy notice.

Prefer to talk? 0800 088 6341

CallGuide price