Utility room fitting in Havant

Why utility room fitting for a Havant home?

If the kitchen in your Hampshire home is a narrow galley, a separate utility can take the appliances that would otherwise crowd the worktop and storage.

In a Havant house where the garage is already used for storage rather than the car, some people fit a run of units and the laundry along one wall. We work throughout Havant (PO9) and across the wider Hampshire area.

What is included in the work?

Every kitchen is different, so we confirm the scope in writing. Most jobs of this kind include:

Worktop over the washing machine and dryer, supported clear of the appliances
A vent to outside for a vented dryer, or a drain hose for condenser models
Free survey visit to check water, waste, power and outside wall positions
Extract fan fitted to clear moisture from washing and drying
Utility sink and tap plumbed in, with new supplies and waste where none exist
Washing machine supply, waste and isolation valve, tested for leaks

What does utility room fitting cost in Havant?

These guide ranges include VAT at 20% and are adjusted for prices in the South East. We confirm your price in writing after a free survey visit. Labour in the South East generally costs more than the UK average, which lifts these ranges a little.

What does utility room fitting cost in Havant?
Typical project	Guide price
Utility units and worktop fitted (fit only)Three to six units, laminate worktop, panels	£1,400–£3,400
Utility room supplied and fittedUnits, worktop, sink, washer and dryer connections	£3,400–£8,000
New utility plumbing for a sink and washing machineSupplies, waste and valves where none exist	£460–£1,200

Fit-only and supply-and-fit ranges cover units, worktop and standard sink and appliance connections, with new plumbing where none exists as a separate line; extract fans, dryer vents and new circuits are quoted on top. Prices include VAT at 20%.

Kitchens in homes around Havant

The housing mix across Hampshire includes Victorian terraces, 1930s semis, post-war estate houses and thatched and brick cottages, so no two kitchen fits are quite alike. Terraces in Southampton and Portsmouth often have a narrow back kitchen, while post-war estate houses tend to have a compact rectangular room suited to an L-shape.

Dense terraced streets can be very tight for parking, and New Forest lanes and village roads may limit the size of delivery vehicle. Water across Hampshire is mostly hard, largely from chalk sources, so limescale on taps and boiling water taps is common and a filter can help.

Regulations for kitchen work in Havant

Fitting a utility room needs no planning permission in England, though a new dryer vent through the outside wall of a flat may need planning permission and the freeholder's consent. Adding sockets to an existing circuit is not notifiable, but a new circuit is, under Part P. Approved Document F sets an extract rate of about 30 litres per second for a utility room, so a new fan should be sized to meet it, and if an open-flued boiler shares the room, a Gas Safe registered engineer should carry out a spillage test once a fan is fitted.

Homes within the New Forest or South Downs national parks, listed cottages and conservation areas may need consent for a new extractor vent or alterations to historic features.

Practical advice for Havant homeowners

In a Havant flat, check with the freeholder before a new dryer vent or extract fan is cut through an outside wall.
Before choosing a dryer for your Havant utility, check whether there is an outside wall close enough for a short, straight vent duct.
If the utility will be in the garage of your Havant home, make sure the space stays above freezing in winter for the pipes and machines.
Stacking the dryer on the washing machine saves width, but it needs a stacking kit that suits both machines and enough height for the pair.

Questions about utility room fitting in Havant

How much does utility room fitting cost in Havant?

Guide prices in Havant are about £1,400 to £3,400 including VAT for fitting three to six utility units and a worktop you have bought. The final price depends on the size of the kitchen and what is moving, and is set out in an itemised written quote.

Can you measure up in Havant before quoting?

Yes. Every quote starts with a free, no-obligation survey visit to your home in Havant. We measure the room, check the walls, floor and service positions, then send an itemised written quote.

Can a worktop go over a washing machine and dryer?

Yes, and it is one of the most common utility layouts. The worktop is supported by units, end panels or a rail at each side rather than resting on the machines, with a small gap above them for vibration and so they can be slid out for servicing. Standard front-loading machines usually fit under a standard-height worktop, but we check the appliance heights against the plan first.

Does a condenser or heat pump dryer need an outside vent?

No. Condenser and heat pump dryers do not need an outside vent, so they can go where a vented dryer cannot. They collect water in a container that has to be emptied, or they can be connected to the waste so they drain automatically, which is easy when the dryer sits beside the washing machine. They still give off some warmth, so the space needs air around it. A vented dryer needs a duct to an outside wall.

Does a utility room need an extractor fan?

Yes, in most cases. Washing and drying put a lot of moisture into a small space, so extract ventilation is strongly advised: Approved Document F sets a rate of about 30 litres per second for utility rooms in England and Wales, and the building standards in Scotland and Technical Booklet K in Northern Ireland cover ventilation too. An extract fan ducted outside is the usual answer, with a window helping but not replacing it. A vented dryer needs its own duct as well.

Utility room fitting near Havant

Neighbouring towns where we offer utility room fitting: