Utility room fitting in Coulsdon

When does utility room fitting make sense in Coulsdon?

Dog owners and keen walkers around Coulsdon often ask for a utility with a deep sink, a coat cupboard and somewhere to leave muddy boots and wet jackets.

Larger households in Coulsdon sharing a lot of laundry often want a stacked washer and dryer, a hanging rail and a clear worktop for folding. We work throughout Coulsdon (CR5) and across the wider Greater London area.

What we cover for utility room fitting in Coulsdon

Your written quote lists everything included. For utility room fitting, that normally means:

Extract fan fitted to clear moisture from washing and drying
Washing machine supply, waste and isolation valve, tested for leaks
A vent to outside for a vented dryer, or a drain hose for condenser models
Worktop over the washing machine and dryer, supported clear of the appliances
Stacking kit fitted where the washer and dryer sit one above the other
Free survey visit to check water, waste, power and outside wall positions

What should you budget for utility room fitting in Coulsdon?

Typical utility room fitting prices for homes in Coulsdon, including VAT and adjusted for London. Your own figure depends on the size of the kitchen, the layout and what is moving. Labour in London generally costs more than the UK average, which lifts these ranges a little.

What should you budget for utility room fitting in Coulsdon?
Typical project	Guide price
Utility units and worktop fitted (fit only)Three to six units, laminate worktop, panels	£1,600–£3,900
Utility room supplied and fittedUnits, worktop, sink, washer and dryer connections	£3,900–£9,100
New utility plumbing for a sink and washing machineSupplies, waste and valves where none exist	£520–£1,300

Fit-only and supply-and-fit ranges cover units, worktop and standard sink and appliance connections, with new plumbing where none exists as a separate line; extract fans, dryer vents and new circuits are quoted on top. Prices include VAT at 20%.

What kind of kitchens do we fit in Coulsdon?

You will find Victorian and Edwardian terraces, conversion flats, mansion block flats and 1930s semis throughout Greater London. Victorian terraces often have a narrow galley beside the side return, while conversion flats and mansion blocks usually fit the kitchen into a small room or along one living-room wall.

Permit parking, red routes and flats without lifts are common, so parking suspensions, stair carries and lift bookings may need arranging before delivery day. London's mains water is hard, so limescale builds quickly on taps and boiling water taps, and a scale-reducing filter is worth planning in.

Regulations for kitchen work in Coulsdon

Fitting a utility room needs no planning permission in England, though a new dryer vent through the outside wall of a flat may need planning permission and the freeholder's consent. Adding sockets to an existing circuit is not notifiable, but a new circuit is, under Part P. Approved Document F sets an extract rate of about 30 litres per second for a utility room, so a new fan should be sized to meet it, and if an open-flued boiler shares the room, a Gas Safe registered engineer should carry out a spillage test once a fan is fitted.

Conservation areas are widespread across London, so a new extractor vent on a front wall may need permission, and leaseholders usually need the freeholder's written consent first.

Before you book utility room fitting in Coulsdon

If your Greater London home has an open-flued boiler in the utility, ask for a spillage test by a Gas Safe registered engineer once an extract fan goes in.
Leave room behind the washing machine for the hoses; pushing it hard against the wall can kink them and stop the water draining properly.
If the utility will be in the garage of your Coulsdon home, make sure the space stays above freezing in winter for the pipes and machines.
Stacking the dryer on the washing machine saves width, but it needs a stacking kit that suits both machines and enough height for the pair.

Questions about utility room fitting in Coulsdon

How much does utility room fitting cost in Coulsdon?

Utility room fitting in Coulsdon typically costs £1,600 to £3,900 including VAT for fitting three to six utility units and a worktop you have bought, based on prices in London. Larger or more involved jobs cost more, and your price is fixed in writing after a free survey visit.

Which parts of Coulsdon do you work in?

All of them. Our Greater London coverage takes in the whole of Coulsdon, including the CR5 postcode district, as well as surrounding towns such as Purley. If you are unsure, send us your postcode.

Can a utility room go in a garage or under the stairs?

Often, yes, as long as the space already exists and is usable. In a garage it needs to be dry and protected from frost, with power and a route for water and waste. Under the stairs, check the headroom, the ventilation and whether a door can open fully. We fit units and connect appliances in existing spaces; converting a garage into a habitable room is a separate building project.

Does a condenser or heat pump dryer need an outside vent?

No. Condenser and heat pump dryers do not need an outside vent, so they can go where a vented dryer cannot. They collect water in a container that has to be emptied, or they can be connected to the waste so they drain automatically, which is easy when the dryer sits beside the washing machine. They still give off some warmth, so the space needs air around it. A vented dryer needs a duct to an outside wall.

Can a worktop go over a washing machine and dryer?

Yes, and it is one of the most common utility layouts. The worktop is supported by units, end panels or a rail at each side rather than resting on the machines, with a small gap above them for vibration and so they can be slid out for servicing. Standard front-loading machines usually fit under a standard-height worktop, but we check the appliance heights against the plan first.

Also covering nearby towns

We also carry out utility room fitting in these towns near Coulsdon: